We’re located in Lexington and service the surrounding area, so stop on by if you’re looking for a new furnace or want to set up an appointment to have one of our techs do a consultation at your home and help you figure out which system is ideal for your home. Schedule furnace repair or a furnace service appointment with James Heating & A/C, Inc using our online scheduler, or if you need help more quickly, give us a buzz at 336-853-6070. 
We not only restore the functionality and efficiency of water heaters. We also install new ones from scratch in the event that you’re moving into a new home; and we’re always available to carefully remove your existing one in order to make room for a new model. Our water heater maintenance is comprehensive and detailed. Call us today to schedule a water heater service in Federal Way, WA.
When it comes to furnace repair, Roswell and area residents can rely on us for fast and efficient repairs. Moncrief has continued to be a consistent provider of heating and cooling services in the Roswell and Marietta. We have worked hard to gain your respect by providing quality services and products, and delivering on our promise of total comfort for your home and family while providing energy and cost savings.
Call us today at (302) 200-4266 today to schedule a service heating system repair, replacement, installation, or tune-up services with our capable team! our team! We offer honest, upfront pricing in writing and industry leading warranties on parts and service. Find your local Horizon today to schedule heating system repair, replacement, installation, or tune-up services with our capable team!

When you hire Steel T Heating & Air Conditioning, know that you’re hiring a business that is fully licensed and insured with certified technicians that receive ongoing training. In order to earn the status of a Carrier Factory Authorized Dealer, our company is held to strict standards for customer satisfaction, product knowledge, technical expertise, and business practices. For five years in a row, we were honored to be selected as a Carrier President’s Award winner. This award identifies Steel T Heating & Air Conditioning as an example of excellence for dealers across the nation to follow. We’re also the only heating and cooling company in the state of Colorado to be inducted into the Carrier Hall of Fame, a distinction that only 25 other dealers in the country can claim. We are extremely proud of the superior service and quality products we offer to homeowners in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO. We never rest on past achievements, but continue to find new ways of earning your business.
For over two decades, Steel T Heating & Air Conditioning has provided expert heating and cooling solutions in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO. As a Carrier Factory Authorized Dealer and five-time recipient of the President’s Award, we’ve established a reputation as an industry leader, setting ourselves apart from other HVAC companies in the Denver Metro Region. Our NATE-certified team of specialists addresses every project with proficient and timely service, using state-of-the-art products and Factory-Approved replacement parts. For optimal temperature control with minimal maintenance and operational costs, call Steel T Heating & Air Conditioning at (303) 872-8849! We offer heating, air conditioning and indoor air quality services that are proven to keep your home comfortable even when local weather is at its most unpredictable.
When you change the temperature on your thermostat, or the temperature in your home drops, a signal lets the furnace's igniter know that it's time to turn on. Igniters exist in both hot water boilers and forced air furnaces, replacing pilot lights as the switch your unit needs to kick on. Naturally, this is a core part in making sure it works reliably. When it stops working, your unit will not longer know when to actually heat your home. Fortunately, furnace igniter repair doesn't tend to be a major budget problem, and costs less than $300 on average.
The quality of your heating installation can greatly impact the quality of your overall heating experience. If your system is not carefully selected, sized and installed, there is really just no way that you can hope for it to operate at peak performance and efficiency levels. Never settle for a subpar heating installation when our Seattle heating installation technicians are available to do the job right.
An electric furnace provides warmth by moving air over and through a series of coils. Ductwork and vents then distribute that air to the individual rooms in your home. Repair costs will depend on both the brand and the exact nature of the problem, but tend to be lower than some of the options above. That's because the units are small, and issues tend to be contained within the heating elements themselves. Expect to spend less than $300 on your electric furnace repair, depending on the exact problem.

We tend to have fairly moderate winters in Federal Way, WA, and that means a heat pump works well down here. A heat pump works much like a central air conditioner in that it circulates a refrigerant that transfers thermal energy from one place to another. But heat pumps not only cool your home during the summer, but also heat your home during the winter.

Your HVAC system is an important appliance with a limited lifetime. Depending on use, with regular maintenance you can expect your furnace and air conditioner to last between 8-18 years before you will need to replace the old one. However, poor maintenance is one of the primary reasons for early replacement HVAC systems ahead of end of average life expectancy.


For starters, once a year, vacuum out the area around the furnace’s blower. If possible, also slide out the fan unit, clean each fan blade with a toothbrush, and then vacuum with a brush attachment on a vacuum cleaner. While you’re at it, look for oil ports on the motor, normally located near the motor shaft. If the motor has these, apply two to three drops of non-detergent motor oil into each port (you may have to remove a cover plate to do this). Though most contemporary motors don’t require lubrication, do lubricate motors with oil ports once a year. For more about maintenance, see Maintenance Checklist for Central Heating Systems.
Female Technicians in Sears Careers DIY Bathroom Storage Ideas Bathroom Remodel Ideas 8 Washing Machine Maintenance Tips 8 Tips to Get Your Furnace Ready for Winter Cabinets: To Replace or Reface? Appliance repair in Fayetteville Appliance repair Santa Barbara Lansing, MI appliance repair Augusta, GA appliance repair Appliance store Raleigh York appliance repair Appliance repair Austin Appliance repair Topeka Appliance repair Louisville Appliance repair Salem, NH Paducah, KY appliance repair Evansville appliance repair Toms River, NJ appliance repair Appliance repair in Easton, PA
Hi This is my 1st summer owning this house. My electric bill has been doubling for 3 months in a row..I have a Carrier 25HPA6 Performance Series 2 Stage Heat Pump...I recently went online and found instructions on how to clean the outdoor unit. I did so and it was not very dirty. I also have a generator that kicks on when I lose power which does not support the AC unit..We did lose power for a few days recently. I have 2 faults showing on the heat pump unit..one being 53 outdoor air sensor not reading or out of range 255 events and F 37 control fault, heater stuck on 13 events.It is set to cool and the fan to auto. I have never had a heat pump or central Air and am very green to this.The previous owners left no manuals.I have found one online but for installation only. PLease help?
James Heating & A/C, Inc offers furnace service appointments that help keep your furnace in tip-top shape and operating efficiently for you all winter long. Whether that’s finding small issues before they become big problems, identifying potential safety hazards or making sure you’re maintaining your manufacturer’s warranty, our experts have you covered. Our trained technicians complete furnace service with care, inspecting a number of components in and around your furnace. In fact, our multi-point inspection can help make sure your system runs smoothly throughout the winter.
AQS is all about offering clients the best possible value. We honor manufacturer warranties for any equipment you purchase from us. Moreover, we provide workmanship warranties for our maintenance services because we want you to be extremely satisfied not only with your heating and cooling units, but with our level of service as well. Allow us to be your partner in maintaining your systems; we will not disappoint you.
Given the broad price ranges above, it's easy to recognize that the cost of your furnace repair varies drastically based on which parts need attention. As a result, it makes sense to gain a better understanding of the parts that heat your home, and how much they cost to repair. Repairing or replacing your furnace’s blower motor can cost you anywhere between $150 and $450, depending on the extent of the damage. Heat exchanger repair costs can vary greatly, from as little as $100 for a simple fix to as much as $1,200 for a full replacement. Repairing a furnace igniter will only cost you $300 at most, while flame sensor repairs generally fall between $80 to $250. The average cost to repair your Thermostat will range from $108 to $282.
If you suspect that your furnace is no longer working as it should, then don’t keep that information to yourself. At Bob’s Heating & Air Conditioning, our heating repair specialists take pride in our ability to solve problems, and that includes comprehensive heating repair service in Federal Way, WA. If there is a problem with your furnace, we can provide a solution fast.
As your trusted furnace maintenance company, we offer local service no matter where you live. We’ll have one of our professionally trained and certified technicians out to your home within two hours of your call. Best of all, it doesn’t matter whether you purchased your furnace with us or not—no matter the make or model of your heater, we can provide the furnace maintenance it needs.  Check out some of the other great benefits of doing business with us:
This is probably the most common question we hear. To give an accurate price, we need to get a safety certified technician out to your home in a fully stocked truck to take a look at your particular situation. Our technician will give you a precise price with your options BEFORE any work begins. Each of our technicians are well trained, experienced, drug tested and background checked so that you can rest easy knowing your services will be performed in a timely and professional manner. If you need help paying for your services, we even offer financing with approved credit through Wells Fargo. Click here to learn more about our financing services.
×