As a Bryant Factory Authorized Dealer, Welzig Heating & Air consistently performs to strenuous standards of technical competence, business ethics, and customer approval.  Our team is NATE-certified, factory trained and regularly updated in progressive technology.  Equipped with leading edge equipment, tools, and a full inventory of genuine manufacturer’s replacement parts, we properly size and install new systems, accurately diagnose existing systems, and resolve the majority of issues right then and there.
Start with your utility company; they can help a great deal. Comparing previous bills isn't always a good measure, as the weather is never exactly the same month to month. Instead, if you take your energy bill and divide it by the square footage of livable space in your home, don't count areas like unfinished garages or basements -- you can calculate how much you are spending to heat or cool each square foot of your home. Your energy provider can tell you what the average cost per square foot is in your region for that same period of time so you can compare apples to apples.
Let us take care of your water heater replacement in Federal Way, WA so that the job is done correctly the first time. We can make sure that your home has exactly what it needs for bountiful hot water. We offer a number of different makes and models to replace your old one, and we can ensure that it integrates seamlessly with the rest of your plumbing. Call Bob’s Heating & Air Conditioning today.

Air Conditioning Your home's air conditioner is an essential part of your overall indoor comfort. A properly working system can mean the difference between a cool, comfortable summer and a hot, miserable few months. If you're currently dealing with a broken air conditioner, an inefficient system, or you would like to schedule a routine, pre-season tune-up, Horizon Services is here to help!

Customer has a 3 year old American Standard gas furnace, she said that her furnace and thermostat were fried and not working. She had an electrician come by and inspect it, but he wasn't able to do anything. Upon investigation, I found that the thermostat has failed due to a power surge that hit the home. I also found that the fuse on the control board was blown and the contactor at the condenser was fried along with wiring. I replaced thermostat, contactor, and fuse/wiring and tested all modes of operation. All components are within manufacturers specifications and system fully operational. Recommend annual maintenance and power surge protector for either home or equipment.


Whether you are looking for gas furnace service or repair, quality installation of a furnace, heat pump or air conditioner, mini split ductless heat pumps, endless hot water from tankless water heaters, better air quality in your home or just a filter change or duct cleaning, Greenwood Heating is your best choice of Seattle heating contractors and cooling specialists.
American Standard manufactures and markets central furnaces that are available in single and multistage configurations, with some models capable of an AFUE rating of more than 90 percent. American Standard markets units that meet Energy Star requirements and makes others that it claims offer quiet operation. The average price of an American Standard central gas furnace is about $3,000 and American Standards are sold through their dealer network.
The motor belt should be firm, giving no more than ½ inch when pressed. It should also be free of cracks and damage. To remove the belt, you will need a wrench and a replacement belt. Loosen, do not remove, the motor bolts. You only need them loose enough to move the motor and slacken the belt. Remove the belt and inspect it, replacing it with a new one if necessary. Belt: $4.00 to $6.00.
The motor belt should be firm, giving no more than ½ inch when pressed. It should also be free of cracks and damage. To remove the belt, you will need a wrench and a replacement belt. Loosen, do not remove, the motor bolts. You only need them loose enough to move the motor and slacken the belt. Remove the belt and inspect it, replacing it with a new one if necessary. Belt: $4.00 to $6.00.

Tyler M came to my house today to clean the furnace fan and motor, and to check the furnace efficiency. He arrived on time, did a great job on the furnace. The fan was really dirty and did more work than was requested as a courtesy - and still charged the quoted price. Tyler was friendly, courteous, very knowledgeable, and was very efficient in completing the work. I would definitely recommend Tyler M and Swan plumbing and Heating for excellent work at a very reasonable price.


This job involves removing the access panel, loosening a couple of bolts that hold the blower motor at the proper tension, and adjusting its distance or realigning the belt. In many cases, it’s a good idea to remove the belt and buy a replacement at a home center. Last, when reinstalling the belt, be careful not to over-tighten it; this can wear out the motor bearings.
Your HVAC system is an important appliance with a limited lifetime. Depending on use, with regular maintenance you can expect your furnace and air conditioner to last between 8-18 years before you will need to replace the old one. However, poor maintenance is one of the primary reasons for early replacement HVAC systems ahead of end of average life expectancy.
Turn off the gas supply valve, typically located by your gas meter on the gas inlet pipe. Turn off the gas by rotating the valve one quarter turn with an adjustable wrench. When the gas is off,  the valve’s oblong stem points perpendicular to the inlet pipe. Then call your gas utility or the fire department from a remote location. Do not return to your home until you know it is safe.
Don and Zac came out and assessed the furnace and explained why it was now time to replace it. Don explained in detail what we should look for (the job is bigger than his preferred scope) and the kind of furnace he recommended. When I asked him for his bill, he said, "Call it an estimate. No charge." I thanked them profusely and paid them in cookies. Affordable Furnace is a great business whose expertise and integrity you can trust.
An electric furnace provides warmth by moving air over and through a series of coils. Ductwork and vents then distribute that air to the individual rooms in your home. Repair costs will depend on both the brand and the exact nature of the problem, but tend to be lower than some of the options above. That's because the units are small, and issues tend to be contained within the heating elements themselves. Expect to spend less than $300 on your electric furnace repair, depending on the exact problem.
If your furnace’s motor runs but the blower doesn’t move air, the belt that connects the two probably has broken. Replacing it is an easy fix. First, turn off all power to the unit and turn off the gas at the gas valve that serves the furnace. Remove the door on the front of the furnace cabinet to give you access to the blower (it might be on a slide-out drawer.) Check the number stamped on the belt and get an exact replacement from a home center or heating supply outlet.

When you need a new air conditioner installation, Seattle furnace repair, or want to schedule routine water heater maintenance, there is one company to call: Bob’s Heating & Air Conditioning. We have years of experience with heating, air conditioning and water heater services, and we can ensure that your home is comfortable throughout the entire year. Contact us today to schedule the high–quality HVAC and water heater services you deserve.
Furnace replacement in Denver is necessary if your furnace is broken beyond repair or if it is more than 15 years old. Old furnaces are very inefficient (they use more power and gas than newer ones) and they can even be very hazardous to your health and home. Furnaces are controlled fires, and when the control systems for said fires are out of date or malfunctioning, the safety and wellbeing of your home are in jeopardy. So if you have an old or malfunctioning heater, then give our furnace replacement company a call today.
×