CM Heating performed a Gas Furnace Diagnostic. Customer wanted his echo bee thermastat installed that he had bought himself. Furnace was working fine just wanted his thermastat installed. He thought that the $99 service fee was going to cover that but explained to him what the service fee was for, and explained that there is a additional install fee for the stat. Customer didn’t want to pay the additional fee so I called the office had them listen to the call to make sure we explained to the customer correctly and to see how they would like me to proceed. So I quoted the customer the fee to install the thermostat but he didn’t want us to install it so I left.

Air Blue Heating and Cooling Inc. offers same-day service across Glencoe, Lake Zurich, Highland Park, Wilmette, IL and the surrounding Chicagoland suburbs.  We handle the upkeep of all makes and models, and complete necessary tasks quickly and accurately.  There is no mess, debris, or damage left behind, and with affordable pricing, there’s simply no need to procrastinate.  For the best possible care of your heating equipment, home and business owners count on the professionals from Air Blue Heating and Cooling Inc..
Customer would like to have her furnace maintained before winter. She would also like her blower wheel and assembly cleaned. System was operational upon arrival. I checked the components within the unit and found the blower capacitor was out of specifications. It was replaced with new one. Blower assembly was pretty dirty. I cleaned the assembly. Burner assembly was ok, I cleaned flame rod. CO output was nominal. Heat output was also nominal. No other issues at this time.
A pinging or popping sound coming from the duct work can come from thermal expansion—the ductwork expanding and contracting as it heats and cools.  Or, air blowing past a loose flap of metal can make the sound. Track along the duct runs, listening for the sound. If you locate it, make a small dent in the sheet metal to provide a more rigid surface that’s less likely to move as it heats and cools.
If those steps don't work, call a heating contractor. Despite the improved efficiency of most new furnaces, it's generally more cost-effective to repair a furnace than to replace it. However, if a key component such as the heat exchanger or control module fails, you're probably better off replacing the furnace, especially if the unit is more than about 15 years old. Furnaces typically last an average of 15 to 18 years.
Denver residents are encouraged to contact Brothers Plumbing, Heating and Electric when in need of fast repairs. If the house feels cold, it could be because the heating system is malfunctioning. When you give us a call, a Denver furnace repair expert will be at your aid right away for a complete diagnosis. We will always attempt to fix the furnace before considering a replacement. However, if the furnace cannot be repaired our Denver furnace repair experts will help you determine the best new furnace.
Whether you are in need of new installation, system replacement, seasonal maintenance, or prompt repair, M and M, Heating & Cooling, Plumbing & Electrical lives up to your highest expectations for quality, pricing, reliability, and quick turnaround on all projects.  And our commitment isn’t limited to regular business hours.  We’re always available when you need us, providing 24 hour Emergency Service across Longmont, Dacono, Frederick, Firestone, Mead, Erie & Johnstown, CO.  Trust the #1 Rated and Certified – A/C, Heating, and Plumbing Experts.
When you trust your winter comfort to Edwards Heating & Air, we answer with state-of-the-art technology, NATE-certified technicians, and prompt action.  As a Carrier Factory Authorized Dealer, we specialize in the most proven and sophisticated solutions to home and commercial temperature control.  Through ongoing factory training and strict installation and service procedures, the team from Edwards Heating & Air delivers superior workmanship and superior results.  We ensure your demands for efficiency, reliability, and consistent heating are met, and your expectations for courteous and skilled service are exceeded.  Whether you are in the process of building your dream home, in need of effective heating for your existing home or business, or upgrading your furnace or heat pump, our installation specialists provide informed recommendations, attention to detail, and quick turnaround on your project.  Serving Acworth and the surrounding areas of Acworth, Alpharetta, Cummings, Cartersville, Kennesaw & Woodstock, GA since 2001, you can count on Edwards Heating & Air for everything from installation and maintenance to emergency repairs.
A pinging or popping sound coming from the duct work can come from thermal expansion—the ductwork expanding and contracting as it heats and cools.  Or, air blowing past a loose flap of metal can make the sound. Track along the duct runs, listening for the sound. If you locate it, make a small dent in the sheet metal to provide a more rigid surface that’s less likely to move as it heats and cools.
We offer a wide range of air conditioning services in Federal Way, WA, from the installation of new systems from scratch to the replacement of old models that have seen better days. We can also make sure that your air conditioner is routinely cleaned and inspected with our routine maintenance. As always, our air conditioning technicians are available to repair your AC at a moment’s notice. Call us today for professional air conditioning service.

To make sure the unit you select is the right size for your home, the Sears HVAC expert does an electronic load calculation estimate to determine the exact type of heat and air conditioning system that’s just right for your home–we don’t just replace it with the same size unit you currently have. These calculations take into consideration things such as the size of your home, its exposure to the sun and wind, the number and size of windows, how well insulated it is and more. This step is essential so the unit isn’t too small or too large–both waste energy.
Ruud, Trane, and American Standard are among the more reliable natural gas furnace brands, whereas Goodman, Lennox, and Amana are among the less reliable brands. York, however, stands out as the least reliable brand and cannot be recommended by Consumer Reports at this time. That’s what we found based on the feedback of 21,618 subscribers, who reported on their experiences with gas furnaces installed between 2011 and 2016.
If you have an older furnace with a standing pilot light, it’s possible that the pilot light has been extinguished. First, confirm that the light is out. Then, turn the gas valve to the off position and wait five minutes. If there is a reset button on your furnace, turn the valve to the pilot position and hold a flame to the dedicated pilot opening while pushing the button for about 30 seconds. (If the pilot doesn’t light on the first attempt, wait a few minutes and repeat the procedure, this time depressing the reset button for 45-60 seconds.) Once the pilot is lit, turn the gas valve back to the on position. If the pilot light won’t stay lit, it’s possible that there is an issue with the thermocouple or ignition system. Call an HVAC professional for assistance.
We install heating equipment from Lennox and can repair all major brands, including Carrier, Trane, York, Bryant, Rheem, and many more. We proudly offer same day service and next day installations. Dealing with a heating emergency? We've got you covered! Our team is prepared to assist you 24 hours a day, 7 days a week to ensure that your home remains comfortable and safe for you and your family members.
I met the owner while looking at a new house, he was servicing the furnace. I asked for a card and explained that I live in a townhome, he said not a problem. Well I called a day or so late to schedule an appointment. That went smooth due to the season the schedule was 3-4 weeks out. I understand and wait patiently. Week the day before the scheduled service i got a reminder call, those are helpful. Well the gal on the phone calls back a few minutes later she called back and came up with a few excuses on why they can no longer come look at my furnace. They seemed pretty hollow to me and she took a fairly snippy attitude with me as well. Due to hire this went down and the fact that it took a month for them to say no can do, I will never ever pay a positive wire forward towards this company!
Our technicians explain all of your options before beginning the repair, so you can decide whether a repair or replacement is best for you. Our No Surprises Pricing—including charging by the job, not by the hour—means the price we quote you is the price you pay. If you decide that replacing your furnace is the best course of action, we can install a new, high-efficiency model in its place.
• Furnace is making more noise because it’s turning on and off more frequently. It may need repair, may not have been sized properly to fit the needs of your house, or may not have the airflow available that it needs from the ducts. The ducts are most often the culprit. Sometimes adding a cold air return can solve this. Ensure your vents are all open. If you are closing off vents in your house this can contribute to the issue.

This job involves removing the access panel, loosening a couple of bolts that hold the blower motor at the proper tension, and adjusting its distance or realigning the belt. In many cases, it’s a good idea to remove the belt and buy a replacement at a home center. Last, when reinstalling the belt, be careful not to over-tighten it; this can wear out the motor bearings.
In Denver, Brothers Plumbing, Heating and Electric have been providing plumbing, heating, and electric services for over 30 years. The family owned and operated company was founded in 1980. The specially trained technicians continuously provide prompt, professional, quality services. We provide top of the line customer service and a guarantee on the work done. Your search for reliable furnace repair ends here.
×