Furnace replacement in Denver is necessary if your furnace is broken beyond repair or if it is more than 15 years old. Old furnaces are very inefficient (they use more power and gas than newer ones) and they can even be very hazardous to your health and home. Furnaces are controlled fires, and when the control systems for said fires are out of date or malfunctioning, the safety and wellbeing of your home are in jeopardy. So if you have an old or malfunctioning heater, then give our furnace replacement company a call today.
We not only restore the functionality and efficiency of water heaters. We also install new ones from scratch in the event that you’re moving into a new home; and we’re always available to carefully remove your existing one in order to make room for a new model. Our water heater maintenance is comprehensive and detailed. Call us today to schedule a water heater service in Federal Way, WA.
The team at Steel T Heating & Air Conditioning is highly qualified, knowledgeable, and efficient when it comes to indoor air quality solutions in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO. The quality of your indoor air can have a significant impact on your health, energy bills, and comfort. We offer air filters, air purifiers, and humidifiers based on your specific needs and desires. As a Carrier Factory Authorized Dealer, we are able to provide superior products, as well as installation, maintenance, and repair services. With reliable service and air quality systems, you’ll be able to enjoy your home while also saving money and improving your health. Give us a call today to learn more and we’ll help you determine the best system for you!

When Asad came to service my furnace, he said it needed a new thermostat. I told him I ordered on on Amazon, and he said he would schedule a time to install it. I've tried calling him to schedule a service time, but he doesn't call back and can't schedule a time to install the thermostat. The business card he handed out only has his first name on it and no business address. Very Shady.


I hired Scoa remodeling to work on a house built in 1953 that I am about to sell. There was rotten wood all along the exterior facia which needed replacing and painting. Mr. Wilkins proposed a plan to repair the wood, and pressure wash and paint the exterior. His work was quick and very professional so I hired Scoa to paint the interior and fix some buckled dry wall. Mr. Wilkins repaired dry wall, fixed a minor mold problem and painted the interior of the house. The work took about 1 1/2 months and was very professional. He gave me a fair price on all the work. I will hire him again at my next place. Also, I hired Jimmy for an entire home remodel and he handled the entire renovation for me. He painted the interior and exterior and painted the kitchen cabinets so now they look brand new. He installed brand new hardwoods in the kitchen and sanded and polished the existing hardwoods so they look brand new also. He renovated two bathrooms with new tile and glaze to the existing tub so that looks brand new as well. He installed all the new fixtures and appliances in the kitchen. You can hire Jimmy for small jobs or very large jobs. His prices are very good and his quality is excellent. I highly recommend him and I will call him my self for future jobs.

Vredevoogd Heating & Cooling is Michigan’s top Heating & Air – Furnace Repair & Replacement – Air Conditioning Repair and installation service. With decades of experience and expertise, Vredevoogd Heating & Cooling remains committed to offering affordable 24/7 service. Our skilled heating and cooling specialists are certified and background checked. Our team is here when you need us to meet all your heating and cooling needs.
Zach came early, which I very much appreciated, and got the job done quickly. He was unfailingly polite and took care with putting on the booties and keeping my carpet clean. He managed to get the sprinkler system turned off even though I was quite uninformed about it and could help very little beyond pointing to where things were. I am always happy to have Brothers people come out to do my plumbing, heating, & electric services.
Though forced-air furnaces are normally quite reliable, they can break down. To avoid break downs, it pays to know how to take care of your furnace and fix it when something goes wrong. Inevitably, a furnace stops working when you need it most. Consequently, fixing becomes urgent very quickly. The following instructions will help. With a little do-it-yourself experience and the proper guidance, you can troubleshoot and repair a variety of furnace problems yourself.
If your furnace needs to be repaired, you’ll want to find a qualified heating, ventilating and air conditioning (HVAC) repair technician. Each state has its own licensing requirements; some require all HVAC technicians to have an HVAC license, while others only require someone operating an HVAC service and installation company with employees to hold a contractor’s license. For example, in Alabama, the Alabama Board of Heating Air Conditioning, and Refrigeration Contractors regulates licensing, while in Kansas there is no state regulatory body and HVAC licensing can vary by region. For simple furnace repairs like changing out a filter, a trusted handyman can probably handle the job, but a trained professional should be hired for tasks like replacing a gas valve, installing a new inducer fan motor or other critical furnace repair jobs that involve dealing with gas leaks or other dangerous conditions. For more, check out our tips for smart hiring on Thumbtack.
Inspect your furnace thermostat by first making sure that it’s turned on. Also, ensure that the thermostat switch is turned to “heat” and not “cool”. If your furnace will still not start with the thermostat on, try adjusting the temperature settings to a few degrees higher. Inspect any visible wires for breaks or splits, and make sure your thermostat batteries are not dead. Do not touch any open wires; contact a professional.
Jeff did an all right job. He had all the right answers to make the company and the previous Gary and his helper look good. Unfortunately, the problem I'm having is my own problem. The companies 2 year warranty is only good if everything is okay on the first visit. First visit was very long, expensive. The mechanism for Flushing acted up about a month later and so they had to come back and it was Gary and his helper and Gary rebuilt the mechanism. A month later they acted up again and then Jeff came out. And that's when everything in my house is wrong and it would cost me close to $1,000 to have them straighten it up so that my toilet would flush right. I've been in my house for 50 years and I've never had this problem before. I don't know if it's because of the equipment that's being put in. So the two star rating is not so much against Jeff as it is against the company and their policies. First time I have used by others and it will be the last. And my recommendation to anyone would be don't don't hire Brothers.

An electric furnace provides warmth by moving air over and through a series of coils. Ductwork and vents then distribute that air to the individual rooms in your home. Repair costs will depend on both the brand and the exact nature of the problem, but tend to be lower than some of the options above. That's because the units are small, and issues tend to be contained within the heating elements themselves. Expect to spend less than $300 on your electric furnace repair, depending on the exact problem.


As the largest heating company in the Northwest, Washington Energy Services has fixed thousands of heating systems. We service most major brands of heating equipment, including York, Bryant, Carrier, Lennox, Coleman and Rheem. Our NATE certified, factory trained service technicians are standing by for furnace service, and also heat pump and air conditioning repair. Home owners from Sea-Tac to Lynnwood trust Washington Energy Services for furnace service and repair. Schedule your service today!
If I could give them 10 stars I would. Don is extremely knowledgeable but more importantly honest. PSE had done a free diagnosis and told me I would need a new induction motor for around $850 or possibly a new furnace. PSE doesn't do the repairs so I found Affordable furnace on yelp. Don showed me where the noise was coming from and that we didn't need the other repair. He performed some routine maintenance and enlightened me on much better furnace filters. He said we will probably need a new furnace in a couple years but given the fact we've lived here 18 years and it was here before we got here I think we're doing pretty good. When it is time for a new furnace there's only one company we will be calling. Thanks Affordable Furnace!
The motor belt should be firm, giving no more than ½ inch when pressed. It should also be free of cracks and damage. To remove the belt, you will need a wrench and a replacement belt. Loosen, do not remove, the motor bolts. You only need them loose enough to move the motor and slacken the belt. Remove the belt and inspect it, replacing it with a new one if necessary. Belt: $4.00 to $6.00.
Fitting a furnace with an electrostatic filter, which uses an electrical charge to help trap particles, or a high-efficiency particulate-arresting (HEPA) filter can reduce the amount of dust blown through the heating system. That might help people with asthma or other chronic lung diseases, but there's little evidence that other people need such filtration.
Hi This is my 1st summer owning this house. My electric bill has been doubling for 3 months in a row..I have a Carrier 25HPA6 Performance Series 2 Stage Heat Pump...I recently went online and found instructions on how to clean the outdoor unit. I did so and it was not very dirty. I also have a generator that kicks on when I lose power which does not support the AC unit..We did lose power for a few days recently. I have 2 faults showing on the heat pump unit..one being 53 outdoor air sensor not reading or out of range 255 events and F 37 control fault, heater stuck on 13 events.It is set to cool and the fan to auto. I have never had a heat pump or central Air and am very green to this.The previous owners left no manuals.I have found one online but for installation only. PLease help?

CM Heating performed a Gas Furnace Diagnostic. Customer wanted his echo bee thermastat installed that he had bought himself. Furnace was working fine just wanted his thermastat installed. He thought that the $99 service fee was going to cover that but explained to him what the service fee was for, and explained that there is a additional install fee for the stat. Customer didn’t want to pay the additional fee so I called the office had them listen to the call to make sure we explained to the customer correctly and to see how they would like me to proceed. So I quoted the customer the fee to install the thermostat but he didn’t want us to install it so I left.


We also offer a great selection of electric furnaces in Seattle, WA. While natural gas does tend to cost less to purchase than electricity, today’s electric furnace models are so efficient that they can really close the price gasp. Call our Seattle furnace experts if you are interested in learning more about the benefits of heating your home with an electric furnace.

We are aware that furnace repair in Denver can be pricey depending on what is malfunctioning. We are always ready to work with you within affordable means. You should not be overwhelmed or worried. We will help you maintain your system longer by treating parts, replacing filters, and cleaning the system. Prior to any furnace repair in Denver, diagnosis is a priority. We always aspire to be the best when satisfying all our customers from the moment you call to the time we leave your home. We analyze your heating system thoroughly and offer you furnace repair that is economical. Contact us for immediate assistance in Denver. To learn what it takes to become one of our team of professional furnace repair technicians, just click HERE.
×