• Furnace is making more noise because it’s turning on and off more frequently. It may need repair, may not have been sized properly to fit the needs of your house, or may not have the airflow available that it needs from the ducts. The ducts are most often the culprit. Sometimes adding a cold air return can solve this. Ensure your vents are all open. If you are closing off vents in your house this can contribute to the issue.

Mechanical air filters trap pollutants by filtering them out of the air as it passes through. Electronic air cleaners pull air in, give the pollutants in that air a static charge, and trap those pollutants on an oppositely charged surface. By working with a qualified professional you can rest assured that you have the right air filtration system in Seattle, WA.
We’re located in Lexington and service the surrounding area, so stop on by if you’re looking for a new furnace or want to set up an appointment to have one of our techs do a consultation at your home and help you figure out which system is ideal for your home. Schedule furnace repair or a furnace service appointment with James Heating & A/C, Inc using our online scheduler, or if you need help more quickly, give us a buzz at 336-853-6070. 
Our new HVAC unit started to leak badly, so we set up an appointment for an on-site diagnosis. The two-man crew arrived in the agreed-upon window and was very experienced. They gave off the impression that they had seen just about everything before. They quickly found the source of the problem, fixed it, and explained in full what they were doing and why. They also offered up some helpful tips of what to look for and how to self-diagnose issues.
Though forced-air furnaces are normally quite reliable, they can break down. To avoid break downs, it pays to know how to take care of your furnace and fix it when something goes wrong. Inevitably, a furnace stops working when you need it most. Consequently, fixing becomes urgent very quickly. The following instructions will help. With a little do-it-yourself experience and the proper guidance, you can troubleshoot and repair a variety of furnace problems yourself.

As a family business owned and operated by the Young family, we have been providing quality air conditioning repair and heating service since 1992. Allow us to show you why we deliver “peace of mind” by virtue of everything we do to make your home environment as comfortable and healthy as it can possibly be. If you need service in the Eastern Panhandle, WV area, we’re here to help! Call today!


The motor belt should be firm, giving no more than ½ inch when pressed. It should also be free of cracks and damage. To remove the belt, you will need a wrench and a replacement belt. Loosen, do not remove, the motor bolts. You only need them loose enough to move the motor and slacken the belt. Remove the belt and inspect it, replacing it with a new one if necessary. Belt: $4.00 to $6.00.
When winter sets in across Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO, keeping a warm and comfortable home becomes a priority.  An efficient, safe, and reliable heating system is crucial.  You can count on Steel T Heating & Air Conditioning to keep costs down and rewards high, protecting your ongoing satisfaction with skilled installation, system replacement, seasonal maintenance, and heating repair.  As a Carrier Factory Authorized Dealer, we remain at the forefront of temperature control, specializing in effective heating service procedures and a wide range of the most technologically advanced equipment on the market.  Let us improve the quality of your comfort, enhance energy efficiency, and put precision control over your indoor environment at your fingertips. Contact us today for heating service in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO. Our NATE-certified technicians are always on call to provide Emergency Service, 24 hours a day, 7 days a week, and every project is handled quickly, accurately, and with unfailing professionalism.
Customer would like to have her furnace maintained before winter. She would also like her blower wheel and assembly cleaned. System was operational upon arrival. I checked the components within the unit and found the blower capacitor was out of specifications. It was replaced with new one. Blower assembly was pretty dirty. I cleaned the assembly. Burner assembly was ok, I cleaned flame rod. CO output was nominal. Heat output was also nominal. No other issues at this time.
Most manufacturers’ warranties call for annual equipment maintenance to stay valid, so missing your tune-ups can possibly result in losing your heating or AC system warranty, which can be major money if your equipment does ever stop working in the middle of a cold snap. Make sure you get all you can from your warranty by making sure it stays valid as long as possible with annual furnace system tune-ups from Service Experts.

This job involves removing the access panel, loosening a couple of bolts that hold the blower motor at the proper tension, and adjusting its distance or realigning the belt. In many cases, it’s a good idea to remove the belt and buy a replacement at a home center. Last, when reinstalling the belt, be careful not to over-tighten it; this can wear out the motor bearings.
Furnace replacement in Denver is necessary if your furnace is broken beyond repair or if it is more than 15 years old. Old furnaces are very inefficient (they use more power and gas than newer ones) and they can even be very hazardous to your health and home. Furnaces are controlled fires, and when the control systems for said fires are out of date or malfunctioning, the safety and wellbeing of your home are in jeopardy. So if you have an old or malfunctioning heater, then give our furnace replacement company a call today.

Heat pumps that wring heat from outdoor air (and reverse the process in summer to act as an air conditioner) are inexpensive to install as an alternative to a cooling-only air-conditioning system. That makes them the preferred way to heat in the South and Southwest, where winters are typically short and mild. Heat pumps that wring heat from the ground are much more expensive to install, but they are suitable for cold climates because they can maintain their operating efficiency. Other inexpensive electric-heat options include strip heaters, which are installed in the ductwork of central air conditioning, and permanently installed baseboard units in each room. But before you consider any type of electric central heating in colder regions, keep in mind that electricity rates are much higher than those for natural gas and are likely to remain that way for the foreseeable future. You can get rate information for various fuels from local utilities and suppliers.
I was able to get an appointment easily and they arrived promptly.  They detected the problem and repaired it quickly.  A few days later, I encountered another problem and again, I was able to get an appointment easily and they arrived promptly.  They recommended some easy fixes and now everything is working well again.  I can recommend them without qualification.  The guys that came out to my house were great.
Female Technicians in Sears Careers DIY Bathroom Storage Ideas Bathroom Remodel Ideas 8 Washing Machine Maintenance Tips 8 Tips to Get Your Furnace Ready for Winter Cabinets: To Replace or Reface? Appliance repair in Fayetteville Appliance repair Santa Barbara Lansing, MI appliance repair Augusta, GA appliance repair Appliance store Raleigh York appliance repair Appliance repair Austin Appliance repair Topeka Appliance repair Louisville Appliance repair Salem, NH Paducah, KY appliance repair Evansville appliance repair Toms River, NJ appliance repair Appliance repair in Easton, PA
The thermocouple is a copper rod that the pilot flame heats-up. When it gets hot enough, the thermocouple signals that there is enough heat to burn the gas fuel being released into the appliance—and so it allows the gas to be released to the burners. In some cases where the pilot light won’t stay lit, the thermocouple needs to be adjusted or replaced. This is generally a job for a professional.
Ashworth Heating & Cooling provides an affordable and reliable source of heating, cooling, air quality, and refrigeration services.  Specializing in installation, equipment updates, and maintenance repair, for both residential and commercial application, we ensure cost-effective solutions to every type of challenge.  Our goal is to simplify your life, minimize disruption, and optimize the performance of your essential systems.  When you contact Ashworth Heating & Cooling, we make it convenient to get the information, recommendations, and assistance you need, and deliver rewarding results in Hurricane, Huntington, Charleston, South Charleston, St. Albans, Dunbar & Milton, WV and all of the Tri-Country Area.
This type of furnace is fueled by liquid propane gas, which is burned to push hot air through your home. A pilot light ignites the burners within a combustion chamber, which push heat into the heat exchanger and eventually through your entire home. Repairing this type of furnace can be more expensive than its electric alternative. For example here are some common propane gas repairs and their costs:

As a Bryant Factory Authorized Dealer, Welzig Heating & Air consistently performs to strenuous standards of technical competence, business ethics, and customer approval.  Our team is NATE-certified, factory trained and regularly updated in progressive technology.  Equipped with leading edge equipment, tools, and a full inventory of genuine manufacturer’s replacement parts, we properly size and install new systems, accurately diagnose existing systems, and resolve the majority of issues right then and there.


The team at Steel T Heating & Air Conditioning is highly qualified, knowledgeable, and efficient when it comes to indoor air quality solutions in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO. The quality of your indoor air can have a significant impact on your health, energy bills, and comfort. We offer air filters, air purifiers, and humidifiers based on your specific needs and desires. As a Carrier Factory Authorized Dealer, we are able to provide superior products, as well as installation, maintenance, and repair services. With reliable service and air quality systems, you’ll be able to enjoy your home while also saving money and improving your health. Give us a call today to learn more and we’ll help you determine the best system for you!
You may think that a great air conditioner is guaranteed to provide you with a great performance. But in order to get the most from your new air conditioner,  you’ll want to schedule air conditioning installation in Renton, WA with a Bob’s professional AC technician so that you’re certain the work is done correctly. That is as easy as giving us a call.
Our services are not limited to only HVAC maintenance, HVAC installation, and HVAC repair. One Hour Air Conditioning and Heating also is concerned with the QUALITY of the air inside your home. Allergies are a big problem. Statistics prove that often the quality of air inside your home can be worse than outside, due to the home being air tight and accumulating dust, molds, and contaminants. Your air conditioning ducts often harbor many of these contaminants. One Hour Air offers Air Duct Cleaning to promote a healthy indoor environment. Call us today or fill out the form on our website for more information.
The motor belt should be firm, giving no more than ½ inch when pressed. It should also be free of cracks and damage. To remove the belt, you will need a wrench and a replacement belt. Loosen, do not remove, the motor bolts. You only need them loose enough to move the motor and slacken the belt. Remove the belt and inspect it, replacing it with a new one if necessary. Belt: $4.00 to $6.00.
Inspect your furnace thermostat by first making sure that it’s turned on. Also, ensure that the thermostat switch is turned to “heat” and not “cool”. If your furnace will still not start with the thermostat on, try adjusting the temperature settings to a few degrees higher. Inspect any visible wires for breaks or splits, and make sure your thermostat batteries are not dead. Do not touch any open wires; contact a professional.

The cost to replace your gas furnace will vary based on the type and size of furnace you select, labor and installation costs, and any repairs your HVAC system may need. Nationally, average HVAC prices for a heating specialist range between $1,800 and $2,500. It’s important to select the right size gas furnace for your heating needs. A furnace that’s too small won’t heat your house properly, while a furnace that’s too large will run inefficiently, cycling on and off and likely breaking down sooner. HVAC specialists calculate your exact heat needs by measuring your home and incorporating variables such as the regional climate and your home’s level of insulation. Retail pricing for gas furnaces can range from $650 up to $3,000 and more. The higher the AFUE (annual fuel utilization efficiency) rating of the furnace, the more efficient it is at turning fuel into heat and the lower your carbon footprint and utility bill will be. HVAC installation costs are often based on an hourly rate and can range from under $50 to over $100 per hour, depending on the company and the furnace being installed. Higher-end furnaces cost more to install because they require added labor and expertise. For a typical installation, it might take two HVAC installation pros one day or less to remove your old furnace and replace it with a new one.
Whether you’re confronted with a minor maintenance issue, safety concern, or system failure, don’t hesitate to call 303-678-5576 for expert assistance. 24/7 Emergency Service allows you to get the help you need, whenever you need it. For all repairs, we prioritize your best interests, providing the information, cost-effective recommendations, and honest answers that add up to greater value for your investment. Our experienced HVAC specialists are familiar with all makes and models, and focus on repairs that enhance the reliability and performance of your equipment. When the job is complete, rest assured there will be no mess, damage, or discarded debris for you to deal with, and your furnace will be ready to meet demand. At Welzig Heating & Air, we build on a reputation for excellence each time we answer a call for repair across Boulder, Longmont, Louisville, Lafayette, CO & more.
As a Bryant Factory Authorized Dealer, Welzig Heating & Air consistently performs to strenuous standards of technical competence, business ethics, and customer approval.  Our team is NATE-certified, factory trained and regularly updated in progressive technology.  Equipped with leading edge equipment, tools, and a full inventory of genuine manufacturer’s replacement parts, we properly size and install new systems, accurately diagnose existing systems, and resolve the majority of issues right then and there.

Walter was stupendous! He installed a new high-efficiency central air and furnace in my house. His master craftsmanship (artistry) and customer service are in a class of their own. From removing the old unit to all of the finishing touches, testing and review of operating the system, every detail was done in excess of what I could have imagine and I'm a Building Inspector. It was a very pleasant experience for me with only good surprises.
Over the past twenty years, we have used a number of different heating and cooling companies, none impressed us to use them more than once or twice. The service provided by A-TEMP was so outstanding; they will be our heating and cooling service provider for LIFE! Exceptional all around! It is nice to know why our home has three temperature zones and what we could do to improve it; plus the costs. Also, to understand the importance of regular maintenance-especially as it relates to carbon monoxide emissions. We appreciate the forewarning that our new system would be noisier due to the increased volume in our return system. We feel so blessed to know we do not have carbon monoxide emissions now and the furnace is the right size for our home. We feel like we won a million dollars with our new system!
When you change the temperature on your thermostat, or the temperature in your home drops, a signal lets the furnace's igniter know that it's time to turn on. Igniters exist in both hot water boilers and forced air furnaces, replacing pilot lights as the switch your unit needs to kick on. Naturally, this is a core part in making sure it works reliably. When it stops working, your unit will not longer know when to actually heat your home. Fortunately, furnace igniter repair doesn't tend to be a major budget problem, and costs less than $300 on average.
24HR Home Comfort Services, is a Wisconsin and Illinois Heating, Cooling, Air Conditioning, Geothermal Heat Pump, and furnace repair, service, replacement and maintenance Company located in Rock County WI and McHenry County IL. 24HR Home Comfort Services employs only the best technicians for air conditioner repair and, furnace repair as well as all air conditioner replacement, furnace replacement and boiler replacement in Afton WI, Avalon WI, Beloit WI, Brodhead WI, Brooklyn WI, Burlington WI, Cambridge WI, Clinton WI, Darien WI, Delavan WI, Dousman WI, Eagle WI, East Troy WI, Edgerton WI, Elkhorn WI, Evansville WI, Fontana WI, Footville WI, Fort Atkinson WI, Hanover WI, Janesville WI, Jefferson WI, Johnson Creek WI, Lake Geneva WI, Lake Mills WI, Lyons WI, Madison WI, Marshall WI, McFarland WI, Milton WI, Mukwonago WI, North Prairie WI, Oconomowoc WI, Oregon WI, Orfordville WI, Palmyra WI, Rockton WI, Roscoe WI, Sharon WI, South Beloit WI, Stoughton WI, Sullivan WI, Sun Prairie WI, Walworth WI, Watertown WI, Watertown WI, Whitewater WI, and Williams Bay WI. A good heating and air conditioning repair or service company near you. To set-up a repair service estimate or replacement estimate, call (608) 868-6412. 24HR Home Comfort Services services all furnace, AC, humidifier, filter, thermostat and water heater brands including Carrier, Bryant, Payne, Trane, Lennox, Rheem, Ruud, Amana, Crown, Frigidaire, Gibson, Goodman, Lochinvar, Maytag, Weil McLain, A O Smith, Kohler, American Standard, GeoExcel, General, Aprilaire, Honeywell, White Rodgers, Dynamic and Skuttle.
If your home is not heated using forced air, chances are a boiler will make sure you stay warm during cold nights. A hot water system delivers hot water through a network of pipes that run to every room in your house. The heating effect gets maximized through radiators. The most common issues with hot water heating tend to be not be major, but small problems that add up over time. Mineral deposits within the water tank, a pilot light malfunction, or an issue with a radiator itself can require professional repair. On average, you will pay between $183 and $582 for these problems. The exact amount will depend on the exact problem, as described in our boiler repair cost guide.
Wife and I bought a fixer-upper last year. One of the issues it had was a lack of heating for the house. I called Affordable Furnace Repair and they sent Don out. He checked on the furnace and found one of the heating elements had gone bad. He fixed it quickly and we had a warm winter. Plus we got a box of filters for cheap from him, all around good service.
We tend to have fairly moderate winters in Federal Way, WA, and that means a heat pump works well down here. A heat pump works much like a central air conditioner in that it circulates a refrigerant that transfers thermal energy from one place to another. But heat pumps not only cool your home during the summer, but also heat your home during the winter.
If I could give them 10 stars I would. Don is extremely knowledgeable but more importantly honest. PSE had done a free diagnosis and told me I would need a new induction motor for around $850 or possibly a new furnace. PSE doesn't do the repairs so I found Affordable furnace on yelp. Don showed me where the noise was coming from and that we didn't need the other repair. He performed some routine maintenance and enlightened me on much better furnace filters. He said we will probably need a new furnace in a couple years but given the fact we've lived here 18 years and it was here before we got here I think we're doing pretty good. When it is time for a new furnace there's only one company we will be calling. Thanks Affordable Furnace!
Heat exchangers are the components that draw heat from the burned gas. To draw more heat from the air they burn, energy-efficient furnaces supplement the primary exchanger with a second exchanger. Because the exhaust gases in that second exchanger might yield a corrosive acidic condensate, the second exchanger is made of stainless steel, lined with plastic, or otherwise protected.
Heat pumps that wring heat from outdoor air (and reverse the process in summer to act as an air conditioner) are inexpensive to install as an alternative to a cooling-only air-conditioning system. That makes them the preferred way to heat in the South and Southwest, where winters are typically short and mild. Heat pumps that wring heat from the ground are much more expensive to install, but they are suitable for cold climates because they can maintain their operating efficiency. Other inexpensive electric-heat options include strip heaters, which are installed in the ductwork of central air conditioning, and permanently installed baseboard units in each room. But before you consider any type of electric central heating in colder regions, keep in mind that electricity rates are much higher than those for natural gas and are likely to remain that way for the foreseeable future. You can get rate information for various fuels from local utilities and suppliers.
They did an outstanding work when you long time ago that our old furnace needed to be replaced. We contacted The Right Choice heating and air in one of the wraps came to our house give us a really good price for a new Trane furnace. The next day they arrived on time and finish the jobs within few hours we cleaned after themselves and made sure to ask us if we understand how to operate our new system. I will definitely recommend to use the Right choice heating and air
Service Experts Heating and Air Conditioning was founded on the basis of providing customers with the best heating and cooling practices in the industry. Since its inception, Service Experts has been dedicated to community, providing the top of the line HVAC products and services in your area. If you want more information about your local HVAC leaders, call us at 866-397-3787 or set up an appointment with us online.
Air Blue Heating and Cooling Inc. offers same-day service across Glencoe, Lake Zurich, Highland Park, Wilmette, IL and the surrounding Chicagoland suburbs.  We handle the upkeep of all makes and models, and complete necessary tasks quickly and accurately.  There is no mess, debris, or damage left behind, and with affordable pricing, there’s simply no need to procrastinate.  For the best possible care of your heating equipment, home and business owners count on the professionals from Air Blue Heating and Cooling Inc..
As a Bryant Factory Authorized Dealer, Welzig Heating & Air consistently performs to strenuous standards of technical competence, business ethics, and customer approval.  Our team is NATE-certified, factory trained and regularly updated in progressive technology.  Equipped with leading edge equipment, tools, and a full inventory of genuine manufacturer’s replacement parts, we properly size and install new systems, accurately diagnose existing systems, and resolve the majority of issues right then and there.
24HR Home Comfort Services, is a Wisconsin and Illinois Heating, Cooling, Air Conditioning, Geothermal Heat Pump, and furnace repair, service, replacement and maintenance Company located in Rock County WI and McHenry County IL. 24HR Home Comfort Services employs only the best technicians for air conditioner repair and, furnace repair as well as all air conditioner replacement, furnace replacement and boiler replacement in Afton WI, Avalon WI, Beloit WI, Brodhead WI, Brooklyn WI, Burlington WI, Cambridge WI, Clinton WI, Darien WI, Delavan WI, Dousman WI, Eagle WI, East Troy WI, Edgerton WI, Elkhorn WI, Evansville WI, Fontana WI, Footville WI, Fort Atkinson WI, Hanover WI, Janesville WI, Jefferson WI, Johnson Creek WI, Lake Geneva WI, Lake Mills WI, Lyons WI, Madison WI, Marshall WI, McFarland WI, Milton WI, Mukwonago WI, North Prairie WI, Oconomowoc WI, Oregon WI, Orfordville WI, Palmyra WI, Rockton WI, Roscoe WI, Sharon WI, South Beloit WI, Stoughton WI, Sullivan WI, Sun Prairie WI, Walworth WI, Watertown WI, Watertown WI, Whitewater WI, and Williams Bay WI. A good heating and air conditioning repair or service company near you. To set-up a repair service estimate or replacement estimate, call (608) 868-6412. 24HR Home Comfort Services services all furnace, AC, humidifier, filter, thermostat and water heater brands including Carrier, Bryant, Payne, Trane, Lennox, Rheem, Ruud, Amana, Crown, Frigidaire, Gibson, Goodman, Lochinvar, Maytag, Weil McLain, A O Smith, Kohler, American Standard, GeoExcel, General, Aprilaire, Honeywell, White Rodgers, Dynamic and Skuttle.
Furthermore, routine water heater maintenance also ensures that your system works as it should. When dust and other sediment build up within the tank or on other components, they can present serious problems for energy efficiency and hot water capacity. Let our Federal Way water heater maintenance specialists keep your water heater in good working order.

This is probably the most common question we hear. To give an accurate price, we need to get a safety certified technician out to your home in a fully stocked truck to take a look at your particular situation. Our technician will give you a precise price with your options BEFORE any work begins. Each of our technicians are well trained, experienced, drug tested and background checked so that you can rest easy knowing your services will be performed in a timely and professional manner. If you need help paying for your services, we even offer financing with approved credit through Wells Fargo. Click here to learn more about our financing services.

×