Jeff did an all right job. He had all the right answers to make the company and the previous Gary and his helper look good. Unfortunately, the problem I'm having is my own problem. The companies 2 year warranty is only good if everything is okay on the first visit. First visit was very long, expensive. The mechanism for Flushing acted up about a month later and so they had to come back and it was Gary and his helper and Gary rebuilt the mechanism. A month later they acted up again and then Jeff came out. And that's when everything in my house is wrong and it would cost me close to $1,000 to have them straighten it up so that my toilet would flush right. I've been in my house for 50 years and I've never had this problem before. I don't know if it's because of the equipment that's being put in. So the two star rating is not so much against Jeff as it is against the company and their policies. First time I have used by others and it will be the last. And my recommendation to anyone would be don't don't hire Brothers.

Furnaces and thermostats are not mix-and-match appliances. Using the wrong type of thermostat with a furnace will cause operating problems and can be dangerous. Although thermostats look similar, they are designed very differently. There are numerous types of heating systems and thermostat systems and they need to be coordinated for safe and proper operation. There are three types of thermostat systems used today: millivoltage, low voltage, and line voltage.​
Adam V. from Swan Plumbing & Heating of Denver, CO came out and tuned up our furnace and A/C units. He was courteous prompt and professional, but beyond that went out of his way to give us recommendations on things we can do to get the most life and performance out of our existing equipment. When we are ready for upgrades and additional services, Swan will be our first (and only) call.
When you contract with Vredevoogd Heating & Cooling Grand Rapids MI, you can count on us to make safety our top priority. Your HVAC system is, of course, a major investment and integral to the functioning of your home; however, nothing is as important as the safety of each life within your home. We carefully inspect your system to ensure that it is functioning properly in order to guard against carbon monoxide poisoning or other system emergencies. We take the greatest care when installing your HVAC system, knowing that a perfect installation is the safest installation for your home. We follow our industry’s best practices concerning safety and will happily share our know how with you when it comes to safely maintaining your system between service appointments.  If you ever suspect a problem with your HVAC system, you hear strange noises or smell unpleasant odors, for instance, you can call us night or day, 24/7, to address your heating and cooling emergency. We’ll never leave you in the lurch! We are ready to provide service ASAP to ensure the safe operation of your HVAC system.
Dirty furnace filters are one of the most common causes of a furnace failure. A dirty furnace filter can limit the airflow through your furnace and cause it to overheat. If you suspect a dirty air filter, change the filter, press the reset button (if your furnace has one) and see whether your furnace begins to emit heated air. Change your furnace filters regularly — pros recommend changing them once a month — to ensure that your furnace continues to work properly. Unaddressed, dirty furnace filters can cause extensive, and expensive, damage to your home’s heating system.

Tyler M came to my house today to clean the furnace fan and motor, and to check the furnace efficiency. He arrived on time, did a great job on the furnace. The fan was really dirty and did more work than was requested as a courtesy - and still charged the quoted price. Tyler was friendly, courteous, very knowledgeable, and was very efficient in completing the work. I would definitely recommend Tyler M and Swan plumbing and Heating for excellent work at a very reasonable price.
In December of 2004 Greenwood was sold again to Michael Porter, this time going back to its Puget Sound roots… owned by a local Seattle resident. Michael Porter, a West Seattle resident and a life-long Seattle native. He is committed to complete customer satisfaction and has a mission to be ‘The Most Trusted HVAC Company in the Puget Sound area’. To become the best heating contractor in Seattle and the Eastside he knows he must be able to provide the Highest Quality and most energy efficient Air Conditioning and Heating products on the market. But there is so much more to being the best. Greenwood Heating is also your local expert when it comes to endless hot water systems, they are also your Indoor Air Quality experts with a full product line of air cleaning products.
We install heating equipment from Lennox and can repair all major brands, including Carrier, Trane, York, Bryant, Rheem, and many more. We proudly offer same day service and next day installations. Dealing with a heating emergency? We've got you covered! Our team is prepared to assist you 24 hours a day, 7 days a week to ensure that your home remains comfortable and safe for you and your family members.

Have you experienced a summer without an air conditioning unit? Have you ever tried to get through the long, hot months of June, July and August with a faulty central air conditioning unit? A fully functioning A/C unit is a necessity, particularly when the mercury starts to rise. We provide replacement and installation of old and inefficient central, air conditioning units, giving you the peace of mind that comes with a reliable new air conditioning system. Instead of continuing expensive repairs on an old system and the stress of never knowing when your system might stop working again, consider installing a new air conditioning system from Sears Home Services.
Most manufacturers’ warranties call for annual equipment maintenance to stay valid, so missing your tune-ups can possibly result in losing your heating or AC system warranty, which can be major money if your equipment does ever stop working in the middle of a cold snap. Make sure you get all you can from your warranty by making sure it stays valid as long as possible with annual furnace system tune-ups from Service Experts.
We are famous for being honest and committed with high quality and value to 100% customer satisfaction 7 days a week especially since furnace repair in Denver is popular. The company is generally proud to comment that “All our specialists are drug tested and background checked.” It is also rare and interesting to comment that the techs use shoe covers and floor mats to keep all homes the same way they found them. You won’t find an equal level of commitment that our technicians provide clients anywhere else.
The flame sensor safeguards your furnace against the unsafe burning of fuel, and a dirty flame sensor may cause your furnace to function improperly. Typically, the flame sensor comes in the form of a rod that can be found near the back of the furnace, right in the path of the burner. To clean the sensor, turn off power to the furnace at the breaker box. Then, if possible, remove the sensor from the furnace. Scrub the sensor gently to remove dust and other residues. Finally, reattach the sensor and resume power to the furnace.
We are open from 7am to 10pm every weekday and from 7am to 8pm on weekends. We book appointments in a 2 hour arrival window and call 30-45 mins before we arrive so you do not have to sit around waiting. It is often possible to schedule your appointment in the evening or morning hours to avoid conflicting with your work schedule. Are you looking for service today? Give us a call or click on one of the Schedule Service buttons found on the top and left sides of this page to contact us today.
A-TEMP has been serving the residential heating and air conditioning needs of greater Portland-area homeowners for almost 50 years. We are all about home comfort, just right. So we know how to keep you comfortable all year-round with responsive service, quality products, and well-trained, certified technicians. We offer efficient, best-of-class choices in furnaces, heat pumps, central air conditioning, duct cleaning, service contracts, and more.
This is probably the most common question we hear. To give an accurate price, we need to get a safety certified technician out to your home in a fully stocked truck to take a look at your particular situation. Our technician will give you a precise price with your options BEFORE any work begins. Each of our technicians are well trained, experienced, drug tested and background checked so that you can rest easy knowing your services will be performed in a timely and professional manner. If you need help paying for your services, we even offer financing with approved credit through Wells Fargo. Click here to learn more about our financing services.
Gas is currently the most common heating fuel and most new central-heating systems use gas. How efficiently a furnace converts gas into heating energy is reflected in its annual fuel-utilization-efficiency (AFUE) rating, which is measured as a percentage. The higher the number, the more heat the furnace can wring from each therm of gas. Since efficient furnaces generate fewer emissions, environmental considerations might also influence your decision.
If your furnace has a pilot light, look for the flame. Check your owner’s manual or the instructions posted inside the furnace cabinet for step-by-step lighting instructions. Usually this involves first turning the gas valve to Off and waiting a couple of minutes. Then you turn it to Pilot. Next, press and hold it down while you light the flame. Last, wait a minute or so, release it, and then turn it to On.
An undersized heating system will, obviously, struggle to heat your home effectively. What some homeowners fail to realize is that an oversized system is no better. If your system is too big for your home, it will short–cycle which can lead to increased wear and tear or damage to your system. Schedule your heating installation in Seattle, WA with us to get the quality heating performance you need.
When it comes to heater repair in Denver, a properly serviced system means significant savings for the homeowner. When a Denver heating technician inspects your system before the winter sets in, the first thing they will check is the condition of the air filters. These filters are important, because they are responsible for removing contaminants, allergens, and dust particles from the air every time the system is turned on. When the filters are clogged, expect more particles to easily pass through right into the air you breathe inside the home. The Denver heating experts will inspect and replace any filters that are no longer effective.
When summer finally arrives in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO, a reliable cooling system lets you truly enjoy the beautiful weather.  The heat, insects, humidity, and noise pollution are left outside, while perfect temperatures are maintained inside.  Steel T Heating & Air Conditioning offers precise climate control, unmatched energy efficiency, and a cleaner, healthier home through the installation of state-of-the-art central air conditioners, heat pumps, and ductless mini split options.  With skilled installation, system replacement, seasonal maintenance, and prompt AC repair, we optimize the performance of your cooling equipment and ensure reliability.  As a Carrier Factory Authorized Dealer, our NATE-certified air conditioning technicians are held to strict training standards, and protect your investment through a higher level of expertise.  Rest assured, we are on-call to provide Emergency Service 24 hours a day, 7 days a week, and all projects are completed promptly, accurately, and to your satisfaction.  Contact us for AC service in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO.
Whether you are looking for gas furnace service or repair, quality installation of a furnace, heat pump or air conditioner, mini split ductless heat pumps, endless hot water from tankless water heaters, better air quality in your home or just a filter change or duct cleaning, Greenwood Heating is your best choice of Seattle heating contractors and cooling specialists.
Two nights ago our smoke alarm went off during the night...after a frantic search through the house we traced the source of the smoke to the furnace.  After reading reviews about Affordable Furnace Repair we decided to give them a try...and we are SO GLAD WE DID!  Within 10 minutes of leaving a message I received a call back and was scheduled the next day.  The source of the problem was immediately identified and promptly fixed....a previous repair had messed up some wiring as well which was also fixed and now we are so glad to be back to 100%.  Can't say enough about the professionalism, responsiveness and service.  Highly recommend.

I met the owner while looking at a new house, he was servicing the furnace. I asked for a card and explained that I live in a townhome, he said not a problem. Well I called a day or so late to schedule an appointment. That went smooth due to the season the schedule was 3-4 weeks out. I understand and wait patiently. Week the day before the scheduled service i got a reminder call, those are helpful. Well the gal on the phone calls back a few minutes later she called back and came up with a few excuses on why they can no longer come look at my furnace. They seemed pretty hollow to me and she took a fairly snippy attitude with me as well. Due to hire this went down and the fact that it took a month for them to say no can do, I will never ever pay a positive wire forward towards this company!
There are a number of reasons that your water heater installation must be completed by a qualified party. First of all, it must be the right size so that it can handle your hot water needs. Plus, only a professional water heater installation in Seattle, WA can ensure that the system operates safely and effectively. Call today to discuss your water heater installation options.
First, check to be sure that your thermostat is set to “heat” and not “cool,” and ensure that the fan is set to “auto.” Then, check to be sure that the thermostat is set to a temperature high enough to trigger the furnace to emit heat. If your thermostat is properly set, ensure that it is getting power — check batteries, fuses and circuit breakers — and ensure that the interior components are clean. Dust and debris inside the thermostat can cause it to malfunction. Fortunately, this is usually an easy fix. In some cases, a malfunctioning thermostat may require adjustment or replacement.  
With flexible financing options from Wells Fargo Financial National Bank, with approved credit, you can enjoy many benefits. From convenient monthly payments to easy-to-use online account management, Wells Fargo financing offers top notch service and control over your finances. We know you want to stay comfort without breaking the bank, so we help you manage your expenses. Call us at 303-678-5576 to learn more!
When it comes to your indoor winter comfort, you should never settle.  A perfectly warm home is important to your daily life, and the performance of your heating system impacts the safety, air quality, and cost of keeping an enjoyable home.  Sky Heating & Air Conditioning protects your ongoing satisfaction with a diverse range of quality heating products and services, including new system installation, replacement, seasonal maintenance, and repair.  We work to improve efficiency, reliability, and safety, and deliver corner to corner temperature control throughout the rooms of your home.  With 24/7 Emergency Services, you’re never left out in the cold.  Contact Sky Heating & Air Conditioning for heating service in The Dalles and Portland, OR, and we’ll provide the exemplary customer service that sets us apart.
You might guess it from the name: the heat exchanger is the part of your furnace that actually heats the air your blower motor pushes through the furnace. It consists of a chamber in which the heat energy produced by natural or propane gas is transferred to the forced air. At the same time, this part also includes a vent through which the gases themselves are safely removed from the unit and the air that enters your home. Because of these gases, a problem with your heat exchanger needs to be dealt with promptly. Over time, cracks in the exchanger can result in carbon monoxide leaks. Taking care of the problem once again means understanding the existence of a range: repairing your heat exchanger can cost as little as $100, but a full replacement may cost up to $1,200.
Trained to quickly and accurately make the diagnosis, our expert troubleshooters possess both the skills and speed that you need. Responding swiftly to your call, one of our technicians will provide you with a handwritten, fair and competitive estimate that details how exactly your system will be repaired. Offering a one-year parts and labor warranty, we restore your heat—and minimize your financial stress.
CM Heating performed an electric furnace Diagnostic - Upon investigation, I found that the sequencer has failed which is why all heat elements are not being activated (3 out of 5 work). This is the second replacement sequencer needed in less than 5 years of operation, the unit is an old model of air handler and only source of heat. Replacement of sequencer is needed, however, based on age and efficiency recommend upgrade of system.
As touched on by their name, heat pumps function by transferring heat energy indoors during the winter and outdoors from your home during the summer. They're often attached to air conditioning units, using the surrounding air to transfer energy. However, geothermal heat pumps and water source heat pumps are also available. The cost to repair a heat pump, again, depends on the specific problem. Replacing a faulty thermostat may cost up to $300 including labor, while a worn or damaged defrost control board can set you back up to $600. For more details on your potential repair costs using this heating source, visit our heat pump repair cost guide.
Over the past twenty years, we have used a number of different heating and cooling companies, none impressed us to use them more than once or twice. The service provided by A-TEMP was so outstanding; they will be our heating and cooling service provider for LIFE! Exceptional all around! It is nice to know why our home has three temperature zones and what we could do to improve it; plus the costs. Also, to understand the importance of regular maintenance-especially as it relates to carbon monoxide emissions. We appreciate the forewarning that our new system would be noisier due to the increased volume in our return system. We feel so blessed to know we do not have carbon monoxide emissions now and the furnace is the right size for our home. We feel like we won a million dollars with our new system!
This job involves removing the access panel, loosening a couple of bolts that hold the blower motor at the proper tension, and adjusting its distance or realigning the belt. In many cases, it’s a good idea to remove the belt and buy a replacement at a home center. Last, when reinstalling the belt, be careful not to over-tighten it; this can wear out the motor bearings.
×