Turn off the gas supply valve, typically located by your gas meter on the gas inlet pipe. Turn off the gas by rotating the valve one quarter turn with an adjustable wrench. When the gas is off,  the valve’s oblong stem points perpendicular to the inlet pipe. Then call your gas utility or the fire department from a remote location. Do not return to your home until you know it is safe.

Rheem manufactures and markets gas central furnaces that are available in single and multistage configurations, with some models capable of an AFUE rating of more than 90 percent. Some units meet Energy Star requirements. The average price of a Rheem central gas furnace is about $2,300 and Rheems are sold through their dealer network. Rheem products are made by the same manufacturer as Ruud.


When you need a new air conditioner installation, Seattle furnace repair, or want to schedule routine water heater maintenance, there is one company to call: Bob’s Heating & Air Conditioning. We have years of experience with heating, air conditioning and water heater services, and we can ensure that your home is comfortable throughout the entire year. Contact us today to schedule the high–quality HVAC and water heater services you deserve.
Fitting a furnace with an electrostatic filter, which uses an electrical charge to help trap particles, or a high-efficiency particulate-arresting (HEPA) filter can reduce the amount of dust blown through the heating system. That might help people with asthma or other chronic lung diseases, but there's little evidence that other people need such filtration.
Vredevoogd Heating & Cooling stands behind its services and products with the strongest guarantees you’ll find anywhere. When you invite us into your home to service or install your HVAC system or do Furnace Repair work in Grand Rapids and beyond, we perform our job with an outstanding level of care and efficiency. Having served Michigan for 54 years, we never rest on our laurels. To remain the best, we intend to give our best every time, every job.
Your furnace's flame sensor is essentially a safety mechanism. As a thin metallic rod in front of the flame inside the unit, it's sole purpose is to confirm that your gas valves only open when a flame actually exists to burn that gas. When the flame sensor stop working, on the other hand, gas leaks can occur. To repair your furnace's flame sensor, expect to spend between $80 and $250. Even a full replacement of this part typically does not go above that range.

Consumer Reports is an independent, non-profit organization dedicated to helping consumers. We make it easy to buy the right product from a variety of retailers. Clicking a retailer link will take you to that retailer’s website to shop. When you shop through retailer links on our site, we may earn an affiliate commission – 100% of the fees we collect are used to support our mission. Learn more. Our service is unbiased: retailers can’t influence placement. All prices are subject to change.
AQS is all about offering clients the best possible value. We honor manufacturer warranties for any equipment you purchase from us. Moreover, we provide workmanship warranties for our maintenance services because we want you to be extremely satisfied not only with your heating and cooling units, but with our level of service as well. Allow us to be your partner in maintaining your systems; we will not disappoint you.
You may think that a great air conditioner is guaranteed to provide you with a great performance. But in order to get the most from your new air conditioner,  you’ll want to schedule air conditioning installation in Renton, WA with a Bob’s professional AC technician so that you’re certain the work is done correctly. That is as easy as giving us a call.
Air Quality Services (AQS) provides you with professional and attentive home heating and cooling services to make sure that your systems do not fail you when you need them the most. We help clients within the Twin Cities area with our expert installation, tune-up, and repair services. Our clients in Bloomington, Edina, Chanhassen, Eden Prairie, Minnetonka, St. Louis Park, Excelsior, and other nearby areas can always count on our prompt heating and cooling expertise.

There is no denying the popularity of furnaces as a heating system option. There is a reason that gas furnaces are so ubiquitous. In fact, there are several. Natural gas furnaces in Seattle, WA are prevalent because they are efficient, reliable, and effective. Schedule your gas furnace installation, repair and maintenance with a member of our team.
As a Factory Authorized Dealer, Air Blue Heating and Cooling Inc. adheres to recommended service procedures, and if replacement parts are necessary, we rely on genuine factory authorized parts to restore original sound levels, efficiency ratings, and durability.  With over thirty years of industry experience, we’ve seen the consequences of neglected upkeep and the rewards of timely inspection from our skilled technicians.  Through seasonal cleaning, adjustment, and troubleshooting, we optimize all components, combat wear and tear, and head off potential difficulties.  The result is far fewer repair needs, lengthened service life, lower sound levels, superior air quality, safe operation, minimized operational costs, enhanced heating capacity, and greater value from your investment.  We also fulfill warranty requirements.  There are no drawbacks.
When summer finally arrives in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO, a reliable cooling system lets you truly enjoy the beautiful weather.  The heat, insects, humidity, and noise pollution are left outside, while perfect temperatures are maintained inside.  Steel T Heating & Air Conditioning offers precise climate control, unmatched energy efficiency, and a cleaner, healthier home through the installation of state-of-the-art central air conditioners, heat pumps, and ductless mini split options.  With skilled installation, system replacement, seasonal maintenance, and prompt AC repair, we optimize the performance of your cooling equipment and ensure reliability.  As a Carrier Factory Authorized Dealer, our NATE-certified air conditioning technicians are held to strict training standards, and protect your investment through a higher level of expertise.  Rest assured, we are on-call to provide Emergency Service 24 hours a day, 7 days a week, and all projects are completed promptly, accurately, and to your satisfaction.  Contact us for AC service in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO.
We not only restore the functionality and efficiency of water heaters. We also install new ones from scratch in the event that you’re moving into a new home; and we’re always available to carefully remove your existing one in order to make room for a new model. Our water heater maintenance is comprehensive and detailed. Call us today to schedule a water heater service in Federal Way, WA.
When you contract with Vredevoogd Heating & Cooling Grand Rapids MI, you can count on us to make safety our top priority. Your HVAC system is, of course, a major investment and integral to the functioning of your home; however, nothing is as important as the safety of each life within your home. We carefully inspect your system to ensure that it is functioning properly in order to guard against carbon monoxide poisoning or other system emergencies. We take the greatest care when installing your HVAC system, knowing that a perfect installation is the safest installation for your home. We follow our industry’s best practices concerning safety and will happily share our know how with you when it comes to safely maintaining your system between service appointments.  If you ever suspect a problem with your HVAC system, you hear strange noises or smell unpleasant odors, for instance, you can call us night or day, 24/7, to address your heating and cooling emergency. We’ll never leave you in the lurch! We are ready to provide service ASAP to ensure the safe operation of your HVAC system.
In addition to our 100% satisfaction guarantee, we also include an Apples to Apples guarantee, meaning we will always provide you with repairs or replacements that are fundamentally the same. Our work is also backed by a two-year warranty on repairs if you are a 247 club member. Find out more about how you can become a 247 club member by contacting us today.
I had these guys out yesterday to do my routine furnace maintenance. They were right on time and very helpful explaining how my furnace worked and how the internal filter can be cleaned. They were extremely knowledgeable and helpful discussing different options for filters with families who have bad allergies. I will definitely hire them for all of my furnace needs in the future!
Our new HVAC unit started to leak badly, so we set up an appointment for an on-site diagnosis. The two-man crew arrived in the agreed-upon window and was very experienced. They gave off the impression that they had seen just about everything before. They quickly found the source of the problem, fixed it, and explained in full what they were doing and why. They also offered up some helpful tips of what to look for and how to self-diagnose issues.
Professional air duct cleaning in Federal Way, WA is important because it ensures that your ductwork functions as it is supposed to. When dust and other debris accumulate inside your ducts, they can hinder airflow, which can raise your energy consumption and cause the cost of cooling to be much higher than should be the case. Let us keep your ducts in good working order.

If you have an older furnace with a standing pilot light, it’s possible that the pilot light has been extinguished. First, confirm that the light is out. Then, turn the gas valve to the off position and wait five minutes. If there is a reset button on your furnace, turn the valve to the pilot position and hold a flame to the dedicated pilot opening while pushing the button for about 30 seconds. (If the pilot doesn’t light on the first attempt, wait a few minutes and repeat the procedure, this time depressing the reset button for 45-60 seconds.) Once the pilot is lit, turn the gas valve back to the on position. If the pilot light won’t stay lit, it’s possible that there is an issue with the thermocouple or ignition system. Call an HVAC professional for assistance.
When your furnace isn’t regularly serviced it can operate less efficiently. This increases your energy bills and also prevents your furnace from keeping your home as warm as you like. Keep your furnace properly maintained with regular service. The national average furnace service cost is between $60 and $80. Companies may offer tuneup specials that cover all the necessary testing, tightening, measuring and cleaning to keep your equipment running at top efficiency. If you have a newer system, furnace service costs may be covered by your warranty. Outside of warranty, a basic tuneup might start at $58 and a more advanced maintenance cleaning could be over $120. Here are some signs your furnace may need service:
This job involves removing the access panel, loosening a couple of bolts that hold the blower motor at the proper tension, and adjusting its distance or realigning the belt. In many cases, it’s a good idea to remove the belt and buy a replacement at a home center. Last, when reinstalling the belt, be careful not to over-tighten it; this can wear out the motor bearings.
Air Blue Heating and Cooling Inc. offers same-day service across Glencoe, Lake Zurich, Highland Park, Wilmette, IL and the surrounding Chicagoland suburbs.  We handle the upkeep of all makes and models, and complete necessary tasks quickly and accurately.  There is no mess, debris, or damage left behind, and with affordable pricing, there’s simply no need to procrastinate.  For the best possible care of your heating equipment, home and business owners count on the professionals from Air Blue Heating and Cooling Inc..
High-efficiency condensing furnaces (90% AFUE and above) are a bit more complex than conventional furnaces. The main differences between a conventional and condensing furnace is the heat exchanger technology used to extract heat from the combustion process and the method used to exhaust the combustion gases. In these ways, the furnaces are very different. The condensing furnace does not have a significantly more efficient combustion process than does a conventional furnace; both use gas burners with electronic ignition. The difference lies in that the condensing furnace has a more efficient heat extraction process after combustion.
×