You can usually slip the belt on the motor’s (smaller) pulley first and then start it on the blower pulley. Rotate the blower pulley by hand, holding the belt in place but keeping your fingers from getting caught between the belt and the pulley. The belt should slip right into place. If it seems to be too tight or difficult to set in place, it may be necessary to adjust the motor mount to provide more slack.

Partly to avoid that possibility, the furnaces in most homes are larger than necessary. Initial cost is only one of the drawbacks of that strategy. A furnace that's too large will cycle on and off more frequently. That puts more wear on its components, wastes energy, and might cause the temperature to vary uncomfortably. Also, a larger replacement furnace might require larger ducts. Without the right size ducts, airflow can be noisy.
The motor belt should be firm, giving no more than ½ inch when pressed. It should also be free of cracks and damage. To remove the belt, you will need a wrench and a replacement belt. Loosen, do not remove, the motor bolts. You only need them loose enough to move the motor and slacken the belt. Remove the belt and inspect it, replacing it with a new one if necessary. Belt: $4.00 to $6.00.

When your furnace isn’t regularly serviced it can operate less efficiently. This increases your energy bills and also prevents your furnace from keeping your home as warm as you like. Keep your furnace properly maintained with regular service. The national average furnace service cost is between $60 and $80. Companies may offer tuneup specials that cover all the necessary testing, tightening, measuring and cleaning to keep your equipment running at top efficiency. If you have a newer system, furnace service costs may be covered by your warranty. Outside of warranty, a basic tuneup might start at $58 and a more advanced maintenance cleaning could be over $120. Here are some signs your furnace may need service:

CM Heating performed an electric furnace Diagnostic - Upon investigation, I found that the sequencer has failed which is why all heat elements are not being activated (3 out of 5 work). This is the second replacement sequencer needed in less than 5 years of operation, the unit is an old model of air handler and only source of heat. Replacement of sequencer is needed, however, based on age and efficiency recommend upgrade of system.

Having a company take care of all your heating and cooling needs shouldn’t indicate that you’re stuck with any ordinary shop who cuts corners. Heating and cooling has been our excitement since 1967, and it’s apparent in the work we offer to our customers. We’re committed to offering you the very best when it comes to all things HVAC, whether it’s service, maintenance or heating and cooling systems.


Furnace replacement in Denver is necessary if your furnace is broken beyond repair or if it is more than 15 years old. Old furnaces are very inefficient (they use more power and gas than newer ones) and they can even be very hazardous to your health and home. Furnaces are controlled fires, and when the control systems for said fires are out of date or malfunctioning, the safety and wellbeing of your home are in jeopardy. So if you have an old or malfunctioning heater, then give our furnace replacement company a call today.
No matter how well you take care of your system, there will come a time when it simply runs out of gas. When your heater cannot be restored with repair work, our team will replace your old system with a new, energy-efficient unit. Working with all makes and models, our comfort specialists have access to the most superior, affordable and effective heating systems on the market.
• Furnace is making more noise because it’s turning on and off more frequently. It may need repair, may not have been sized properly to fit the needs of your house, or may not have the airflow available that it needs from the ducts. The ducts are most often the culprit. Sometimes adding a cold air return can solve this. Ensure your vents are all open. If you are closing off vents in your house this can contribute to the issue.
Great service, Brandon did a job great job explaining eveything he was doing and showed me all issues and concerns I may have had beyond my initial problem of a clogged drain that responded to. He also did a great job in resolving my repair needs and installation of needed parts to maintain our AC unit. I now have a AC person I trust and can rely on for the future for both repair and maintenance. Thank you Brandon and A team Mechanical for the prompt response and after hour service.
Hello, We have a Hunter ceiling fan that no longer spins. It has power, as the light still works and when you push the remote you hear the clicking, like it's trying to engage, but the blades do not spin. Does this sound like a possible flywheel issue? I removed the Remote Receiver, part 85112-02, and apparently it's no longer available, but I don't think the receive is the problem. Any feedback would be welcome.
If I could give them 10 stars I would. Don is extremely knowledgeable but more importantly honest. PSE had done a free diagnosis and told me I would need a new induction motor for around $850 or possibly a new furnace. PSE doesn't do the repairs so I found Affordable furnace on yelp. Don showed me where the noise was coming from and that we didn't need the other repair. He performed some routine maintenance and enlightened me on much better furnace filters. He said we will probably need a new furnace in a couple years but given the fact we've lived here 18 years and it was here before we got here I think we're doing pretty good. When it is time for a new furnace there's only one company we will be calling. Thanks Affordable Furnace!
Our Denver heating company understands that in our small part of the country, it is important that your heating system is maintained throughout the year to ensure it runs efficiently when you need it the most. Our specialists in heater repair in Denver recommend that your heating system is maintained at least once a year to spot potential problems before they have the chance to worsen and cause your system to fail at the worst possible time. At Brothers Plumbing, Heating, and Electric, our professionals are committed to diagnosing any problem your heating system may suffer while it still remains a minor repair.

BGE HOME HVAC repair technicians are thoroughly trained and certified to work on all major brands of heating and air conditioning equipment. When your system breaks down and needs a heating and air conditioning repair, you want to call someone you can trust. Need air conditioning service in the middle of the night? Emergency heating and cooling HVAC service is available 24 hours a day by calling 888-243-4663.
I had these guys out yesterday to do my routine furnace maintenance. They were right on time and very helpful explaining how my furnace worked and how the internal filter can be cleaned. They were extremely knowledgeable and helpful discussing different options for filters with families who have bad allergies. I will definitely hire them for all of my furnace needs in the future!
It doesn’t matter if you need a replacement water heater installed or if you just want to schedule routine water heater maintenance; our staff will get the job done right. You rely on your water heater far too much to take any chances with the quality of its performance. When it comes to water heaters in Seattle, WA, our technicians are second to none.
Among the leading ways to prevent a breakdown and make sure it runs like a lean machine is with yearly scheduled tune-ups on your furnace. Just like any mechanical equipment, the useful life of a furnace will be enhanced with preventive maintenance, by ensuring that all the elements of the unit are running efficiently. In addition, regular cleanings can help pinpoint concerns before they become big problems and you end up paying emergency rates on a cold winter night. Plus, because furnaces burn fuel to make it hot, it’s important to inspect all the various pieces to ensure there aren’t any ruptures or leaks that could impact the safety of your family. Taking the time to schedule a tune-up, even when it’s not making that odd rattling noise you’ve been ignoring, will save you time, stress, and money throughout the heating season.
Bonney’s NATE certified technicians will troubleshoot and repair your furnace for safe and reliable operation. Our technicians use state of the art tools including video inspection cameras and exhaust gas analyzers to perform thorough, comprehensive diagnostics when equipment is broken. Furthermore, we arrive in a “warehouse on wheels” stocked with many parts to get your furnace repaired as quickly as possible.  For an unexpected heater repair Bonney offers financing to make your comfort affordable.
×