When it comes to furnace repair, Roswell and area residents can rely on us for fast and efficient repairs. Moncrief has continued to be a consistent provider of heating and cooling services in the Roswell and Marietta. We have worked hard to gain your respect by providing quality services and products, and delivering on our promise of total comfort for your home and family while providing energy and cost savings.
Keeping too many heat registers closed can cause heat to build up in your furnace, forcing air out of duct leaks and requiring the blowers to compensate for the added pressure. Essentially, blocking heating vents causes your furnace to work harder and longer than it is intended to work. Further, it forces air pressure to build up in your air ducts, which may both cause and worsens airflow leaks — particularly at joints and seams. Pros recommend keeping at least 80 percent of your heating registers open to prevent unnecessary air from building up in your furnace.
When Asad came to service my furnace, he said it needed a new thermostat. I told him I ordered on on Amazon, and he said he would schedule a time to install it. I've tried calling him to schedule a service time, but he doesn't call back and can't schedule a time to install the thermostat. The business card he handed out only has his first name on it and no business address. Very Shady.
Ashworth Heating & Cooling provides an affordable and reliable source of heating, cooling, air quality, and refrigeration services.  Specializing in installation, equipment updates, and maintenance repair, for both residential and commercial application, we ensure cost-effective solutions to every type of challenge.  Our goal is to simplify your life, minimize disruption, and optimize the performance of your essential systems.  When you contact Ashworth Heating & Cooling, we make it convenient to get the information, recommendations, and assistance you need, and deliver rewarding results in Hurricane, Huntington, Charleston, South Charleston, St. Albans, Dunbar & Milton, WV and all of the Tri-Country Area.

Geothermal Heating and Cooling systems are unmatched in every way. This green alternative to temperature control is three times more efficient than conventional systems. Recognized by the US Environmental Protection Agency as the most environmentally-friendly option available today, installation of a geothermal HVAC system translates into a 50% reduction in heating costs, 30% reduction in cooling costs, and a 65% potential savings on hot water costs.  Sky Heating & Air Conditioning is now the largest WaterFurnace geothermal contractor west of Iowa. Our team of experienced professionals offer conscientious and skilled start-to-finish installation and service.  We specialize in outstanding geothermal HVAC systems, adding value and enjoyment to your home through sustainable solutions to year round temperature control. Contact Sky Heating & Air Conditioning for geothermal heat pump installation in Portland.

Vredevoogd Heating & Cooling Grand Rapids MI routinely serves the areas of Grand Rapids, Wyoming, Lansing, Grandville, and Kalamazoo. We provide a comprehensive menu of HVAC services delivered by certified HVAC technicians who specialize in heating and cooling repair and installation. World-class customer service is a cornerstone of our business and we are committed to doing the job right the first time. We have a reputation for integrity and service excellence. By living up to our good name, we continue to build our customer base throughout the Michigan region and look forward to adding you to our service family. So if you are looking for a “heating & air company near me” in Grand Rapids, or a Furnace Repair Lansing, Furnace Repair Kalamazoo and more. Call today.


There will always be an occasion for you to rely on a heating or air conditioning system. The major appliances make comfortable life possible, providing warmth on nippy days and cool air during humid summers. Whether or not you use them daily, however, your heating and air conditioning systems need to be maintained every now and then to ensure that they function properly.

Natural gas furnaces operate similarly to the above, using a pilot light to ignite the burners and heat up the air. Also similar to propane gas, your average repair costs for a natural gas furnace will range anywhere from $125 for small repairs to $1,200 if you have to replace the entire heat exchanger. The difference between both options is not necessarily the actual furnace, but the type of gas used to burn through it and heat your home. As a result, the repair costs tend to be close to identical.


As your water heater operates it will incur some general wear and tear; there is no way to prevent this. With the help of a Seattle, WA water heater maintenance specialist, though, you can keep this wear and tear from developing into major headaches down the road. We’ll make sure that your water heater is in the great operating condition you deserve.
I had a minor crisis at my home with a backed up sewer drain in the basement and me just home from a freak accident where I broke both arms! Spencer narrowed down the problem and called his coworker who had the equipment to snake my drain and stayed to clean up until the issue was resolved. He was courteous and careful to make sure my carpet didn't get marked up and cleaned up well. I am so grateful for him being willing to go the extra mile to help me out!

Lennox is another leading manufacturer and marketer of gas central furnaces. Lennox central furnaces are available in single and multistage configurations, with some models capable of an AFUE rating of more than 90 percent. Lennox markets units that meet Energy Star requirements and makes others that it claims offer quiet operation. The average price of a Lennox central gas furnace is about $2,500 and Lennoxes are sold through their dealer network.
If your furnace’s motor runs but the blower doesn’t move air, the belt that connects the two probably has broken. Replacing it is an easy fix. First, turn off all power to the unit and turn off the gas at the gas valve that serves the furnace. Remove the door on the front of the furnace cabinet to give you access to the blower (it might be on a slide-out drawer.) Check the number stamped on the belt and get an exact replacement from a home center or heating supply outlet.

If you need a furnace repaired or an air conditioner serviced, we'll send a local technician out to diagnose the specific problem and recommend solutions for you and your family. There will be a diagnostic fee for the visit, and any specific repairs will be an additional charge. If replacing your system is the best solution, the fee for the diagnosis will be credited toward the purchase and install of a new system.
I was able to get an appointment easily and they arrived promptly.  They detected the problem and repaired it quickly.  A few days later, I encountered another problem and again, I was able to get an appointment easily and they arrived promptly.  They recommended some easy fixes and now everything is working well again.  I can recommend them without qualification.  The guys that came out to my house were great.
If you have an older furnace with a standing pilot light, it’s possible that the pilot light has been extinguished. First, confirm that the light is out. Then, turn the gas valve to the off position and wait five minutes. If there is a reset button on your furnace, turn the valve to the pilot position and hold a flame to the dedicated pilot opening while pushing the button for about 30 seconds. (If the pilot doesn’t light on the first attempt, wait a few minutes and repeat the procedure, this time depressing the reset button for 45-60 seconds.) Once the pilot is lit, turn the gas valve back to the on position. If the pilot light won’t stay lit, it’s possible that there is an issue with the thermocouple or ignition system. Call an HVAC professional for assistance.
Residents of Federal Way, WA know how important a reliable furnace is when fall and winter arrive. At Bob’s Heating & Air Conditioning, we offer a quality heating systems & service that can handle any heating need you might have. From the installation of new furnaces and heat pumps to the replacement of old models that no longer work properly, our Federal Way heating system specialists can keep you warm during the heating season.
Our Denver heating company understands that in our small part of the country, it is important that your heating system is maintained throughout the year to ensure it runs efficiently when you need it the most. Our specialists in heater repair in Denver recommend that your heating system is maintained at least once a year to spot potential problems before they have the chance to worsen and cause your system to fail at the worst possible time. At Brothers Plumbing, Heating, and Electric, our professionals are committed to diagnosing any problem your heating system may suffer while it still remains a minor repair.

There are a number of reasons that your water heater installation must be completed by a qualified party. First of all, it must be the right size so that it can handle your hot water needs. Plus, only a professional water heater installation in Seattle, WA can ensure that the system operates safely and effectively. Call today to discuss your water heater installation options.
With more than 100 years in existence, Lennox has always delivered industry-leading innovation and technology while preserving stringent durability and reliability standards. The professionals at James Heating & A/C, Inc help bring those standards to Lexington so that you can always have total home comfort. If you’re in the market for a new HVAC system or even if you just have a question about what we offer, give us a call at 336-853-6070. We’d love to hear from you. 
For over two decades, Steel T Heating & Air Conditioning has provided expert heating and cooling solutions in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO. As a Carrier Factory Authorized Dealer and five-time recipient of the President’s Award, we’ve established a reputation as an industry leader, setting ourselves apart from other HVAC companies in the Denver Metro Region. Our NATE-certified team of specialists addresses every project with proficient and timely service, using state-of-the-art products and Factory-Approved replacement parts. For optimal temperature control with minimal maintenance and operational costs, call Steel T Heating & Air Conditioning at (303) 872-8849! We offer heating, air conditioning and indoor air quality services that are proven to keep your home comfortable even when local weather is at its most unpredictable.
Residents of Federal Way, WA know how important a reliable furnace is when fall and winter arrive. At Bob’s Heating & Air Conditioning, we offer a quality heating systems & service that can handle any heating need you might have. From the installation of new furnaces and heat pumps to the replacement of old models that no longer work properly, our Federal Way heating system specialists can keep you warm during the heating season.

As a Carrier Factory Authorized Dealer, Edwards Heating & Air meets strict requirements for business practices, such as proper licenses, insurance and liability coverage, and customer service.  Our technicians participate in continued factory training, keeping current with advancements in techniques and technology, and adhere to strict installation and maintenance procedures.  Our sales team is educated in leading-edge Carrier products, ensuring accurate recommendations for cost-effective, highly efficient, and reliable solutions to your specific circumstances.  We specialize in heating, cooling, and air quality systems that are widely regarded as the world’s best.  Leading the industry in design and engineering, Carrier products offer unprecedented convenience, economy, and luxury.  These systems don’t just regulate temperature.  They improve your everyday life.


Customer stated their blower fan is consistently running. She has had the furnace off all summer and just fired it up and it will just blow consistently. Upon investigation, the technician found that the damper control was sending 24V to G terminal while switched off. This indicates a stuck closed relay. I disconnected it and tested the unit. Due to age of unit, I would recommend upgrading to a more efficient model.
In Denver, Brothers Plumbing, Heating and Electric have been providing plumbing, heating, and electric services for over 30 years. The family owned and operated company was founded in 1980. The specially trained technicians continuously provide prompt, professional, quality services. We provide top of the line customer service and a guarantee on the work done. Your search for reliable furnace repair ends here.
×