Ruud, Trane, and American Standard are among the more reliable natural gas furnace brands, whereas Goodman, Lennox, and Amana are among the less reliable brands. York, however, stands out as the least reliable brand and cannot be recommended by Consumer Reports at this time. That’s what we found based on the feedback of 21,618 subscribers, who reported on their experiences with gas furnaces installed between 2011 and 2016.
Furthermore, routine water heater maintenance also ensures that your system works as it should. When dust and other sediment build up within the tank or on other components, they can present serious problems for energy efficiency and hot water capacity. Let our Federal Way water heater maintenance specialists keep your water heater in good working order.
Cut down on energy costs and prevent damage to your furnace by addressing a gas furnace that's overactive or short cycling. Besides the need for consistently comfortable temperatures, this issue could cause long-term safety issues to your home, making it very important to address. From a faulty thermostat to a dirty filter, there are several possible causes to investigate.
Turn off the gas supply valve, typically located by your gas meter on the gas inlet pipe. Turn off the gas by rotating the valve one quarter turn with an adjustable wrench. When the gas is off,  the valve’s oblong stem points perpendicular to the inlet pipe. Then call your gas utility or the fire department from a remote location. Do not return to your home until you know it is safe.
Like all mechanical systems, your heat pump or gas furnace might run into trouble eventually. Stay alert to any sudden changes in the way that your furnace operates, such as loud or strange sounds as well as a spike in your energy bills. Our Federal Way heating repair technicians can restore the functionality and efficiency of your furnace in no time.
Hello, We have a Hunter ceiling fan that no longer spins. It has power, as the light still works and when you push the remote you hear the clicking, like it's trying to engage, but the blades do not spin. Does this sound like a possible flywheel issue? I removed the Remote Receiver, part 85112-02, and apparently it's no longer available, but I don't think the receive is the problem. Any feedback would be welcome.

If you need a furnace repaired or an air conditioner serviced, we'll send a local technician out to diagnose the specific problem and recommend solutions for you and your family. There will be a diagnostic fee for the visit, and any specific repairs will be an additional charge. If replacing your system is the best solution, the fee for the diagnosis will be credited toward the purchase and install of a new system.
The motor belt should be firm, giving no more than ½ inch when pressed. It should also be free of cracks and damage. To remove the belt, you will need a wrench and a replacement belt. Loosen, do not remove, the motor bolts. You only need them loose enough to move the motor and slacken the belt. Remove the belt and inspect it, replacing it with a new one if necessary. Belt: $4.00 to $6.00.
Our technicians explain all of your options before beginning the repair, so you can decide whether a repair or replacement is best for you. Our No Surprises Pricing—including charging by the job, not by the hour—means the price we quote you is the price you pay. If you decide that replacing your furnace is the best course of action, we can install a new, high-efficiency model in its place.
Professional air duct cleaning in Federal Way, WA is important because it ensures that your ductwork functions as it is supposed to. When dust and other debris accumulate inside your ducts, they can hinder airflow, which can raise your energy consumption and cause the cost of cooling to be much higher than should be the case. Let us keep your ducts in good working order.
The national average for furnace replacement is between $1,800 and $2,500. The cost can range dramatically higher depending on the model of furnace you select, any repair work you require, your location and the cost of installation. Furnace installation costs can be more than the furnace itself due to the cost of doing business and the expertise needed to install the HVAC equipment. Installing a new furnace generally requires technical know-how and the proper tools and licensing. It’s best to hire a pro and budget for furnace installation rather than risk potentially unsafe DIY installation. This will ensure your home’s safety. Check to see if your HVAC contractor has the proper licensing to do the job. If you need duct repair or replacement, expect to pay more for your furnace installation costs. The price for duct repair could be an hourly rate ranging on average anywhere from $85 to $150 per hour, with additional costs for parts.
The team at Steel T Heating & Air Conditioning is highly qualified, knowledgeable, and efficient when it comes to indoor air quality solutions in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO. The quality of your indoor air can have a significant impact on your health, energy bills, and comfort. We offer air filters, air purifiers, and humidifiers based on your specific needs and desires. As a Carrier Factory Authorized Dealer, we are able to provide superior products, as well as installation, maintenance, and repair services. With reliable service and air quality systems, you’ll be able to enjoy your home while also saving money and improving your health. Give us a call today to learn more and we’ll help you determine the best system for you!
We are aware that furnace repair in Denver can be pricey depending on what is malfunctioning. We are always ready to work with you within affordable means. You should not be overwhelmed or worried. We will help you maintain your system longer by treating parts, replacing filters, and cleaning the system. Prior to any furnace repair in Denver, diagnosis is a priority. We always aspire to be the best when satisfying all our customers from the moment you call to the time we leave your home. We analyze your heating system thoroughly and offer you furnace repair that is economical. Contact us for immediate assistance in Denver. To learn what it takes to become one of our team of professional furnace repair technicians, just click HERE.
Geothermal Heating and Cooling systems are unmatched in every way. This green alternative to temperature control is three times more efficient than conventional systems. Recognized by the US Environmental Protection Agency as the most environmentally-friendly option available today, installation of a geothermal HVAC system translates into a 50% reduction in heating costs, 30% reduction in cooling costs, and a 65% potential savings on hot water costs.  Sky Heating & Air Conditioning is now the largest WaterFurnace geothermal contractor west of Iowa. Our team of experienced professionals offer conscientious and skilled start-to-finish installation and service.  We specialize in outstanding geothermal HVAC systems, adding value and enjoyment to your home through sustainable solutions to year round temperature control. Contact Sky Heating & Air Conditioning for geothermal heat pump installation in Portland.
As the largest heating company in the Northwest, Washington Energy Services has fixed thousands of heating systems. We service most major brands of heating equipment, including York, Bryant, Carrier, Lennox, Coleman and Rheem. Our NATE certified, factory trained service technicians are standing by for furnace service, and also heat pump and air conditioning repair. Home owners from Sea-Tac to Lynnwood trust Washington Energy Services for furnace service and repair. Schedule your service today!
Are you having trouble staying comfortable in your home? Tin Man Heating & Cooling Inc. is here to make sure you have the properly working HVAC system. In fact, we are very proud to go above and beyond in the services we provide to our customers and that has helped us earn an A+ ratting with the Better Business Bureau. Our team of skilled technicians can provide you with the right repairs and tune ups for all makes and models. We are proud to have become one of the leaders in geothermal installation in the region over the last decade.
If your heating system in Everett, WA is not working it is likely your furnace needs repair or service. At times the fix is simple, other times it is not. Our heating and furnace service technicians have years of experience working on furnaces like yours in Everett, WA. C.M. Heating has service vehicles on call that are fully equipped with the tools and parts necessary to get your furnace back up and operating.
I'm so impressed and happy that I called Affordable Furnace Repair!  Not only did they come out same day, but they were early and quick.  They even showed me how I can try to fix it myself next time.  And they were so nice and friendly!  Sometimes it's weird to invite people into your home to work on something, but this wasn't weird or awkward to me.  I feel like I'm gushing here, but I'm so happy our heat is working again so quickly!
When choosing a heating and cooling company, it's important that you find one that employs licensed, highly trained, background-checked, and drug-tested technicians. Considering this person will be in your home, it would be nice if the technician is also well-groomed, honest, polite, informative, and will give you options on how to improve your comfort.
I had these guys out yesterday to do my routine furnace maintenance. They were right on time and very helpful explaining how my furnace worked and how the internal filter can be cleaned. They were extremely knowledgeable and helpful discussing different options for filters with families who have bad allergies. I will definitely hire them for all of my furnace needs in the future!
There are a lot of benefits you can enjoy with routine air conditioning maintenance in Seattle, WA. Your system will operate more reliably, as well as more efficiently. This can help you reduce the risk of AC repair needs and can reduce energy costs. Contact us for more tips about how air conditioning maintenance can benefit your comfort and your system.
Whether you are looking for gas furnace service or repair, quality installation of a furnace, heat pump or air conditioner, mini split ductless heat pumps, endless hot water from tankless water heaters, better air quality in your home or just a filter change or duct cleaning, Greenwood Heating is your best choice of Seattle heating contractors and cooling specialists.
While repair is often the preferred choice, problems like a consistent repeating complication or extra-costly furnace repair parts might start leading you in a different direction. Remember that repair is only the preferred option when the cost of seeking it makes sense! If you’re shelling out for repair every single year, then it might be time to talk to your heating contractor about furnace replacement.
Gas furnaces and heaters have control shutoffs to prevent gas leaks, but they are not fail-safe. If you smell gas in your house, do not turn any lights on or off, and do not try to shut off the gas leading to the furnace. Get out of the house, leaving the door open, and immediately call the gas company or the fire department to report a leak. Do not re-enter your home.
CM Heating performed an electric furnace Diagnostic - Upon investigation, I found that the sequencer has failed which is why all heat elements are not being activated (3 out of 5 work). This is the second replacement sequencer needed in less than 5 years of operation, the unit is an old model of air handler and only source of heat. Replacement of sequencer is needed, however, based on age and efficiency recommend upgrade of system.
For starters, once a year, vacuum out the area around the furnace’s blower. If possible, also slide out the fan unit, clean each fan blade with a toothbrush, and then vacuum with a brush attachment on a vacuum cleaner. While you’re at it, look for oil ports on the motor, normally located near the motor shaft. If the motor has these, apply two to three drops of non-detergent motor oil into each port (you may have to remove a cover plate to do this). Though most contemporary motors don’t require lubrication, do lubricate motors with oil ports once a year. For more about maintenance, see Maintenance Checklist for Central Heating Systems.
×