I had these guys out yesterday to do my routine furnace maintenance. They were right on time and very helpful explaining how my furnace worked and how the internal filter can be cleaned. They were extremely knowledgeable and helpful discussing different options for filters with families who have bad allergies. I will definitely hire them for all of my furnace needs in the future!

Dirty furnace filters are one of the most common causes of a furnace failure. A dirty furnace filter can limit the airflow through your furnace and cause it to overheat. If you suspect a dirty air filter, change the filter, press the reset button (if your furnace has one) and see whether your furnace begins to emit heated air. Change your furnace filters regularly — pros recommend changing them once a month — to ensure that your furnace continues to work properly. Unaddressed, dirty furnace filters can cause extensive, and expensive, damage to your home’s heating system.
Hi This is my 1st summer owning this house. My electric bill has been doubling for 3 months in a row..I have a Carrier 25HPA6 Performance Series 2 Stage Heat Pump...I recently went online and found instructions on how to clean the outdoor unit. I did so and it was not very dirty. I also have a generator that kicks on when I lose power which does not support the AC unit..We did lose power for a few days recently. I have 2 faults showing on the heat pump unit..one being 53 outdoor air sensor not reading or out of range 255 events and F 37 control fault, heater stuck on 13 events.It is set to cool and the fan to auto. I have never had a heat pump or central Air and am very green to this.The previous owners left no manuals.I have found one online but for installation only. PLease help?
As a technical industry, the heating and cooling field is associated with annual advances. New energies make our industry an exciting place to work. Our team thrives on keeping up to date with all changes in the HVAC field. We are here to share our knowledge with each customer. When you are ready to update your HVAC system, we can help you select the ideal system for your home.

Inspect your furnace thermostat by first making sure that it’s turned on. Also, ensure that the thermostat switch is turned to “heat” and not “cool”. If your furnace will still not start with the thermostat on, try adjusting the temperature settings to a few degrees higher. Inspect any visible wires for breaks or splits, and make sure your thermostat batteries are not dead. Do not touch any open wires; contact a professional.
As a Factory Authorized Dealer, Air Blue Heating and Cooling Inc. adheres to recommended service procedures, and if replacement parts are necessary, we rely on genuine factory authorized parts to restore original sound levels, efficiency ratings, and durability.  With over thirty years of industry experience, we’ve seen the consequences of neglected upkeep and the rewards of timely inspection from our skilled technicians.  Through seasonal cleaning, adjustment, and troubleshooting, we optimize all components, combat wear and tear, and head off potential difficulties.  The result is far fewer repair needs, lengthened service life, lower sound levels, superior air quality, safe operation, minimized operational costs, enhanced heating capacity, and greater value from your investment.  We also fulfill warranty requirements.  There are no drawbacks.
Professionally installed air filtration systems in Federal Way, WA are the best way to ensure that your home has excellent indoor air quality. Let us help you breathe better air in your home. We offer a number of different air filtration systems from leading manufacturers in the industry, and we’d be happy to help you find one that meets your needs.
The cost to replace your gas furnace will vary based on the type and size of furnace you select, labor and installation costs, and any repairs your HVAC system may need. Nationally, average HVAC prices for a heating specialist range between $1,800 and $2,500. It’s important to select the right size gas furnace for your heating needs. A furnace that’s too small won’t heat your house properly, while a furnace that’s too large will run inefficiently, cycling on and off and likely breaking down sooner. HVAC specialists calculate your exact heat needs by measuring your home and incorporating variables such as the regional climate and your home’s level of insulation. Retail pricing for gas furnaces can range from $650 up to $3,000 and more. The higher the AFUE (annual fuel utilization efficiency) rating of the furnace, the more efficient it is at turning fuel into heat and the lower your carbon footprint and utility bill will be. HVAC installation costs are often based on an hourly rate and can range from under $50 to over $100 per hour, depending on the company and the furnace being installed. Higher-end furnaces cost more to install because they require added labor and expertise. For a typical installation, it might take two HVAC installation pros one day or less to remove your old furnace and replace it with a new one.
When pollutants build up within your ductwork, it is possible for those ducts to distribute pollutants throughout your entire home. These pollutants can also accumulate on vital components of your HVAC equipment. Professional duct cleaning in Seattle, WA is a great way to ensure that your system operates effectively as well as to protect the quality of your air.
Edwards Heating & Air continues to look for new ways to improve service.  We hire only NATE-certified, extensively experienced, and dedicated professionals.  We offer a wide range of products, from ductless options to heat pumps, furnaces, air conditioners, and air quality systems, guaranteed to answer the most challenging comfort demands.  To maintain your equipment in peak condition, promoting year after year of uninterrupted performance, we offer preventative service plans that are affordable, convenient, and effective.  If you are ever confronted with a malfunction, the team from Edwards Heating & Air is always available, 24 hours a day, 7 days a week, to provide the skilled assistance you need. Through our relationship with Wells Fargo Financial National Bank, we offer flexible financing options with approved credit to facilitate your investment into superior quality heating and cooling.  Our ongoing dedication to your complete satisfaction is evidenced by our complaint-free, A+ rating by the Better Business Bureau.  At Edwards Heating & Air, we do things right, every time.

A whole–house air conditioning system in Federal Way, WA is by no means a luxury, but a necessity. At Bob’s Heating & Air Conditioning, our Federal Way air conditioning system specialists work with customers to ensure that their homes are comfortable all summer long. There is simply no other way to ensure that you and your family are cool during the summer than by having your cooling system service completed by a professional Federal Way air conditioning technician.
We offer a number of indoor air quality products and services in Federal Way, WA, including air duct cleaning, air filtration systems and duct sealing. Keeping your ducts in good shape is a great way to prevent noxious particles from accumulating therein. A whole–house air filter is the best way to remove contaminants. Call Bob’s Heating & Air Conditioning today for more details.
About us: Vredevoogd Heating & Cooling has been in business since 1964. As a financially stable company known for its reliable expertise and first-rate customer care, Vredevoogd Heating & Cooling is a company you can trust. Moreover, when you do business with a stable business like Vredevoogd Heating & Cooling, you have the peace of mind of knowing that your warranties are solidly backed by a company that intends to remain in business for another 50+ years and beyond. Don’t trust your essential home systems and investment to any fly-by-night company. Our best practices ensure that we will be here to meet our customer’s HVAC needs for decades to come. Vredevoogd Heating & Cooling founder Dennis Vredevoogd set the high standards by which the company continues to pride itself for. Today, the company continues to be family owned and operated by the founder’s sons, Michael and Thomas, who are committed to maintaining the company’s high standards and complementing them with the innovative technical know-how needed to service today’s advanced HVAC systems.

Though forced-air furnaces are normally quite reliable, they can break down. To avoid break downs, it pays to know how to take care of your furnace and fix it when something goes wrong. Inevitably, a furnace stops working when you need it most. Consequently, fixing becomes urgent very quickly. The following instructions will help. With a little do-it-yourself experience and the proper guidance, you can troubleshoot and repair a variety of furnace problems yourself.


Your furnace's flame sensor is essentially a safety mechanism. As a thin metallic rod in front of the flame inside the unit, it's sole purpose is to confirm that your gas valves only open when a flame actually exists to burn that gas. When the flame sensor stop working, on the other hand, gas leaks can occur. To repair your furnace's flame sensor, expect to spend between $80 and $250. Even a full replacement of this part typically does not go above that range.
Our company’s strength lies in our years of experience performing air conditioning and heating repair in Voorhees, Sewell, Haddonfield, and other towns in and around South Jersey. We also take pride in the high standard we set for the quality of our AC repair and work, and our unfaltering dedication to our customers located in Haddonfield, Sewell, and other parts of Jersey. For three generations we have kept these ideals at the forefront of our operations, allowing us to continue to be one of Southern New Jersey’s leading HVAC Contractors and air conditioner companies.
When you trust your winter comfort to Edwards Heating & Air, we answer with state-of-the-art technology, NATE-certified technicians, and prompt action.  As a Carrier Factory Authorized Dealer, we specialize in the most proven and sophisticated solutions to home and commercial temperature control.  Through ongoing factory training and strict installation and service procedures, the team from Edwards Heating & Air delivers superior workmanship and superior results.  We ensure your demands for efficiency, reliability, and consistent heating are met, and your expectations for courteous and skilled service are exceeded.  Whether you are in the process of building your dream home, in need of effective heating for your existing home or business, or upgrading your furnace or heat pump, our installation specialists provide informed recommendations, attention to detail, and quick turnaround on your project.  Serving Acworth and the surrounding areas of Acworth, Alpharetta, Cummings, Cartersville, Kennesaw & Woodstock, GA since 2001, you can count on Edwards Heating & Air for everything from installation and maintenance to emergency repairs.
A number of other variables can influence your decision on whether to repair or replace your furnace, as well. In addition to cost and brand, consider the expected lifetime of your furnace. If it is more than 15 years old, it might make more sense to invest in a new unit even if it costs more than simply repairing the current problem. Long-term costs also play into the equation. For example, your new furnace may be more energy efficient than the current unit. Even though you will pay more for the actual installation, you might be able to make back your investment through lower energy bills. To make your decision, consult with a reliable professional on what to do. In inspecting your furnace, they will be able to make an informed recommendation that looks not just to the next year, but years into the future. That way, you can make the best possible decision for your home and budget long-term.
Heat pumps act like an air conditioner in the summer, removing the heat from the air and then recirculating the cooled air throughout your home. In the winter, though, they can transfer ambient heat from outside into your house, efficiently warming your home with minimal energy consumption. If you do decide on a heat pump in Seattle, WA, make sure that you schedule your installation, maintenance and repair services with a skilled, qualified technician.
An electric furnace provides warmth by moving air over and through a series of coils. Ductwork and vents then distribute that air to the individual rooms in your home. Repair costs will depend on both the brand and the exact nature of the problem, but tend to be lower than some of the options above. That's because the units are small, and issues tend to be contained within the heating elements themselves. Expect to spend less than $300 on your electric furnace repair, depending on the exact problem.
As a Carrier Factory Authorized Dealer, Edwards Heating & Air provides superior quality products and workmanship to home and business owners in Acworth and across Acworth, Alpharetta, Cummings, Cartersville, Kennesaw & Woodstock, GA.  Our NATE-certified technicians adhere to strict installation and service procedures, and are uniquely qualified to recommend the most cost-effective solutions to meet your exact needs and expectations.  Whether you are in the market for an HVAC system for new construction, a replacement unit, ductless options, heat pumps, or air conditioning, Edwards Heating & Air ensures a refreshingly cool and healthy home and work environment.  Through accurate sizing, precision installation, and conscientious maintenance, we help you enjoy maximum return from your investment and reliable operation, year after year.  For any cooling challenge you may face, the team from Edwards Heating & Air are your problem solvers, and we are always here when you need us, 24 hours a day, 7 days a week.
Air Blue Heating and Cooling Inc. offers same-day service across Glencoe, Lake Zurich, Highland Park, Wilmette, IL and the surrounding Chicagoland suburbs.  We handle the upkeep of all makes and models, and complete necessary tasks quickly and accurately.  There is no mess, debris, or damage left behind, and with affordable pricing, there’s simply no need to procrastinate.  For the best possible care of your heating equipment, home and business owners count on the professionals from Air Blue Heating and Cooling Inc..
When your furnace isn’t regularly serviced it can operate less efficiently. This increases your energy bills and also prevents your furnace from keeping your home as warm as you like. Keep your furnace properly maintained with regular service. The national average furnace service cost is between $60 and $80. Companies may offer tuneup specials that cover all the necessary testing, tightening, measuring and cleaning to keep your equipment running at top efficiency. If you have a newer system, furnace service costs may be covered by your warranty. Outside of warranty, a basic tuneup might start at $58 and a more advanced maintenance cleaning could be over $120. Here are some signs your furnace may need service:
To keep your furnace in good working order it’s important to have it regularly cleaned. The national average furnace cleaning cost ranges from $60 to $80, though prices can vary greatly based on where you live in the country and what your furnace maintenance includes. An HVAC company may have different rates for different levels of furnace maintenance. For example,one company may offer general furnace maintenance for $79 and advanced maintenance for $138. Another company may offer a 38-point maintenance check for $89 and a 64-point maintenance check for $178. According to Energy.gov, a standard furnace cleaning and maintenance visit can include:
Our technicians explain all of your options before beginning the repair, so you can decide whether a repair or replacement is best for you. Our No Surprises Pricing—including charging by the job, not by the hour—means the price we quote you is the price you pay. If you decide that replacing your furnace is the best course of action, we can install a new, high-efficiency model in its place.
Cleaning the debris that builds up on your filters will aid with the flow of air. When your air filter is clogged, your air handler must work harder to compensate for the blockage of air flow. In addition to driving up your utility bill, the reduced air flow through your heating and cooling system can cause your heat exchanger to overheat and shut off too quickly.    
×