With certified, professional technicians covering the entire Twin Cities area, we’ve served over 475,000 customers. Ready for emergency repairs, Standard Heating has a fleet of technicians and service vehicles, with over 30 vehicles in the field on most days. For emergency service, call us immediately so that we can return your home to the comfort level you expect. We repair and service all brands of heating and cooling equipment including:
At Steel T Heating & Air Conditioning, we know how frustrating it can be when you have to invest large amounts of money in your HVAC systems. We always have your best interests in mind, so we provide flexible financing options, with approved credit, from Wells Fargo Financial National Bank. You’ll enjoy benefits such as convenient monthly payments, special financing terms, and easy online account management. Apply today or give us a call for more information!
Whether you’re satisfied with your water heater’s performance or not, you would do well to take advantage of our professional water heater services in Federal Way, WA. Water heaters are sturdy and reliable when professionally installed and serviced, but there may come a time when you need to call on the Federal Way water heater experts at Bob’s Heating & Air Conditioning for water heater repairs.
The flame sensor safeguards your furnace against the unsafe burning of fuel, and a dirty flame sensor may cause your furnace to function improperly. Typically, the flame sensor comes in the form of a rod that can be found near the back of the furnace, right in the path of the burner. To clean the sensor, turn off power to the furnace at the breaker box. Then, if possible, remove the sensor from the furnace. Scrub the sensor gently to remove dust and other residues. Finally, reattach the sensor and resume power to the furnace.
Your heating, cooling, and air quality systems are a significant investment, and are expected to answer high demand, day after day, year after year.  To enjoy the greatest benefit from your equipment, let the professionals from Edwards Heating & Air handle the essential upkeep.  Through conscientious, seasonal maintenance, we effectively restore operational sound and efficiency levels, improve air quality, eliminate the majority of repairs, and extend service life.  The key to safe and uninterrupted performance, lower overall costs, and superior temperature control is through proactive measures.  The NATE-certified technicians from Edwards Heating & Air complete a lengthy task list that is specifically targeted at the optimization of your system.  Not only will your HVAC system be ready and able to handle volatile weather conditions, but it will operate safely.  Comprehensive service from Edwards Heating & Air is your best protection against health concerns, property damage, system failure, and elevated cost of ownership.  Contact Edwards Heating & Air, and we'll set up a maintenance plan that is affordable, convenient, rewarding, and works perfectly for you.

The flame sensor safeguards your furnace against the unsafe burning of fuel, and a dirty flame sensor may cause your furnace to function improperly. Typically, the flame sensor comes in the form of a rod that can be found near the back of the furnace, right in the path of the burner. To clean the sensor, turn off power to the furnace at the breaker box. Then, if possible, remove the sensor from the furnace. Scrub the sensor gently to remove dust and other residues. Finally, reattach the sensor and resume power to the furnace.
Though forced-air furnaces are normally quite reliable, they can break down. To avoid break downs, it pays to know how to take care of your furnace and fix it when something goes wrong. Inevitably, a furnace stops working when you need it most. Consequently, fixing becomes urgent very quickly. The following instructions will help. With a little do-it-yourself experience and the proper guidance, you can troubleshoot and repair a variety of furnace problems yourself.
In this video I show you a few things to look for to fix your furnace. It's expensive to call a repair man and most of the time is not needed. I am not an expert, just someone trying to share my experience with you to save some money. Always turn your power to your furnace off before tampering with things. This would be a good video to start with because I try to show a general idea of how a furnace works. When all else fails, you have to call an expert, but first try the steps in this video.
Whether you are in need of new installation, system replacement, seasonal maintenance, or prompt repair, M and M, Heating & Cooling, Plumbing & Electrical lives up to your highest expectations for quality, pricing, reliability, and quick turnaround on all projects.  And our commitment isn’t limited to regular business hours.  We’re always available when you need us, providing 24 hour Emergency Service across Longmont, Dacono, Frederick, Firestone, Mead, Erie & Johnstown, CO.  Trust the #1 Rated and Certified – A/C, Heating, and Plumbing Experts.
When choosing a heating and cooling company, it's important that you find one that employs licensed, highly trained, background-checked, and drug-tested technicians. Considering this person will be in your home, it would be nice if the technician is also well-groomed, honest, polite, informative, and will give you options on how to improve your comfort.

The cost of a new furnace might make you balk at first thought, but with modern manufacturers offering an extremely diverse range of options with varying AFUE ratings, optional accessories, and more, there is a furnace to meet any budget! It’s just important that you work with the right service team and experts that will work with you rather than try to “sell” you.
The price of a furnace generally rises in step with its fuel efficiency. A furnace with a 90 percent AFUE might cost $1,000 more than a similar size unit with an 80 percent AFUE. But you can often recoup that additional cost through lower fuel bills over the life of the furnace, especially in regions such as the Northeast and Midwest, where winters can be harsh. How quickly you recover the investment depends on more than just AFUE. The electricity to run furnaces with different AFUEs can vary significantly. The climate where you live, how well your home is insulated, and your local gas and electricity rates also affect payback times.
The cost to replace your gas furnace will vary based on the type and size of furnace you select, labor and installation costs, and any repairs your HVAC system may need. Nationally, average HVAC prices for a heating specialist range between $1,800 and $2,500. It’s important to select the right size gas furnace for your heating needs. A furnace that’s too small won’t heat your house properly, while a furnace that’s too large will run inefficiently, cycling on and off and likely breaking down sooner. HVAC specialists calculate your exact heat needs by measuring your home and incorporating variables such as the regional climate and your home’s level of insulation. Retail pricing for gas furnaces can range from $650 up to $3,000 and more. The higher the AFUE (annual fuel utilization efficiency) rating of the furnace, the more efficient it is at turning fuel into heat and the lower your carbon footprint and utility bill will be. HVAC installation costs are often based on an hourly rate and can range from under $50 to over $100 per hour, depending on the company and the furnace being installed. Higher-end furnaces cost more to install because they require added labor and expertise. For a typical installation, it might take two HVAC installation pros one day or less to remove your old furnace and replace it with a new one.

Adam V. from Swan Plumbing & Heating of Denver, CO came out and tuned up our furnace and A/C units. He was courteous prompt and professional, but beyond that went out of his way to give us recommendations on things we can do to get the most life and performance out of our existing equipment. When we are ready for upgrades and additional services, Swan will be our first (and only) call.

When you trust your winter comfort to Edwards Heating & Air, we answer with state-of-the-art technology, NATE-certified technicians, and prompt action.  As a Carrier Factory Authorized Dealer, we specialize in the most proven and sophisticated solutions to home and commercial temperature control.  Through ongoing factory training and strict installation and service procedures, the team from Edwards Heating & Air delivers superior workmanship and superior results.  We ensure your demands for efficiency, reliability, and consistent heating are met, and your expectations for courteous and skilled service are exceeded.  Whether you are in the process of building your dream home, in need of effective heating for your existing home or business, or upgrading your furnace or heat pump, our installation specialists provide informed recommendations, attention to detail, and quick turnaround on your project.  Serving Acworth and the surrounding areas of Acworth, Alpharetta, Cummings, Cartersville, Kennesaw & Woodstock, GA since 2001, you can count on Edwards Heating & Air for everything from installation and maintenance to emergency repairs.
Don has earned a lifetime customer! My wife and I moved into our fixer-upper house this summer and just when the weather turned we realized that the 8 year old Goodman furnace in our basement had rusted heat exchange pipes and was leaking carbon monoxide. (So much for the $400 I paid to an home inspector before we moved in...) Fortunately, the furnace had a warranty still active. Not so fortunately, Goodman was incompetent in getting us the replacement part. It took them a month to send it, and then it wasn't even the right part. Don went to bat for us and convinced Goodman to foot the bill for an entirely new furnace! He and another worker made time in their busy schedule during thanksgiving week to come out and get the unit installed. This is above and beyond service and I couldn't be happier.
For over two decades, Steel T Heating & Air Conditioning has provided expert heating and cooling solutions in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO. As a Carrier Factory Authorized Dealer and five-time recipient of the President’s Award, we’ve established a reputation as an industry leader, setting ourselves apart from other HVAC companies in the Denver Metro Region. Our NATE-certified team of specialists addresses every project with proficient and timely service, using state-of-the-art products and Factory-Approved replacement parts. For optimal temperature control with minimal maintenance and operational costs, call Steel T Heating & Air Conditioning at (303) 872-8849! We offer heating, air conditioning and indoor air quality services that are proven to keep your home comfortable even when local weather is at its most unpredictable.
Finally, don't underestimate the thermostat as a potential reason why your furnace is not working. Everything on the heating unit itself may function perfectly, but your home still will not heat right if the console you use to set the temperature doesn't communicate your input. A faulty thermostat can either be due to the wall unit itself, or the wiring that connects it to your furnace. Average thermostat repair costs are between $108 and $282, including labor. Replacement costs, of course, depend on the thermostat you choose. Visit our thermostat repair cost guide to learn more about this type of issue.
When you establish routine visits with Vredevoogd Heating & Cooling Grand Rapids MI, you can enhance the longevity of your HVAC system with our custom care. Our technicians are skilled at performing comprehensive inspections. We routinely spot small issues before they can turn into major repairs. By optimally maintaining your system, we can extend its life and ensure that it reliably meets your household’s heating and cooling needs. You can also join our Comfort Club! You can schedule routine appointments to service your system before the hot and cold seasons. If you discover a problem afterward, call us to provide you with immediate service. We can troubleshoot the problem in no time. We’ll give you an upfront estimate concerning cost, parts, and labor. There’s no guessing when it comes to our service and costs. Our techs will provide you with everything you need to know about their service from beginning to end of the job. We even have Financing Available.
An annual inspection of your unit can ensure that the various potential problems mentioned above are detected early, and before they require complete replacement. During this inspection, for instance, a professional might find small cracks in your heat exchanger or a faulty seal in your blower motor. Some manufacturer's warranties even require these annual inspections to maintain validity. Typically, your furnace inspection will cost between $80 and $150 depending on the area in which you live and the professional you work with.
If your heating system in Everett, WA is not working it is likely your furnace needs repair or service. At times the fix is simple, other times it is not. Our heating and furnace service technicians have years of experience working on furnaces like yours in Everett, WA. C.M. Heating has service vehicles on call that are fully equipped with the tools and parts necessary to get your furnace back up and operating.
Call us today at (302) 200-4266 today to schedule a service heating system repair, replacement, installation, or tune-up services with our capable team! our team! We offer honest, upfront pricing in writing and industry leading warranties on parts and service. Find your local Horizon today to schedule heating system repair, replacement, installation, or tune-up services with our capable team!

The main purpose of your furnace filter is to ensure that none of the additional materials your fans pull back into the unit - such as hair and dust - actually damage the furnace or its parts. In the process, it also improves air quality in your home. Some annual inspections will include changing and cleaning this part of the unit. That said, you can also clean or change your furnace filteryourself. Costs for new filters range based on brand, but tend to be around $30.


Cut down on energy costs and prevent damage to your furnace by addressing a gas furnace that's overactive or short cycling. Besides the need for consistently comfortable temperatures, this issue could cause long-term safety issues to your home, making it very important to address. From a faulty thermostat to a dirty filter, there are several possible causes to investigate.
×