My furnace thermostat stopped working, and when I called Dehlia answered the phone and set up an appointment. They charged less for a diagnostic call than larger companies. They are actively licensed, bonded and insured. Verne arrived 2 days later, explained what was broken in my 17 year old furnace and gave me an estimate and time of replacement for a new furnace. Dehlia confirmed via email and phone, and Don and Zack showed up as promised on time a week later and replaced my Bryant 90i furnace with a new Rheem 96% efficient 2 stage Variable speed 85,000btu gas furnace Model #R96VA0852521 and provided me with the paperwork warranty and removed the old one. Cost was $5,394.90 including tax. I gave up on trying to get 2 more estimates because every furnace company wants $125 to $200 to come out to do a diagnostic and this company wanted $75 to come out to look at it although admittedly they just took a look at it and said it was broken and repair would be $2 to $3k and should just get a new  one (this fee was waived when I agreed to buy a new furnace from them). They also said it was possible I could find cheaper installation elsewhere, but I was freezing in December and I just wanted heat and other companies were 2 to 3 weeks out for an appointment.  They were pleasant to chat with as they worked and Don updated a convoluted furnace exhaust piping system. They accept cash and check after a job is finished with no deposit up front and are clear that 3% is added if you pay via credit card.  Overall I am happy with my new furnace although I sure wish I could've replaced it myself to save some money.
Whether you’re satisfied with your water heater’s performance or not, you would do well to take advantage of our professional water heater services in Federal Way, WA. Water heaters are sturdy and reliable when professionally installed and serviced, but there may come a time when you need to call on the Federal Way water heater experts at Bob’s Heating & Air Conditioning for water heater repairs.
As a Carrier Factory Authorized Dealer, Edwards Heating & Air meets strict requirements for business practices, such as proper licenses, insurance and liability coverage, and customer service.  Our technicians participate in continued factory training, keeping current with advancements in techniques and technology, and adhere to strict installation and maintenance procedures.  Our sales team is educated in leading-edge Carrier products, ensuring accurate recommendations for cost-effective, highly efficient, and reliable solutions to your specific circumstances.  We specialize in heating, cooling, and air quality systems that are widely regarded as the world’s best.  Leading the industry in design and engineering, Carrier products offer unprecedented convenience, economy, and luxury.  These systems don’t just regulate temperature.  They improve your everyday life.
I hired Scoa remodeling to work on a house built in 1953 that I am about to sell. There was rotten wood all along the exterior facia which needed replacing and painting. Mr. Wilkins proposed a plan to repair the wood, and pressure wash and paint the exterior. His work was quick and very professional so I hired Scoa to paint the interior and fix some buckled dry wall. Mr. Wilkins repaired dry wall, fixed a minor mold problem and painted the interior of the house. The work took about 1 1/2 months and was very professional. He gave me a fair price on all the work. I will hire him again at my next place. Also, I hired Jimmy for an entire home remodel and he handled the entire renovation for me. He painted the interior and exterior and painted the kitchen cabinets so now they look brand new. He installed brand new hardwoods in the kitchen and sanded and polished the existing hardwoods so they look brand new also. He renovated two bathrooms with new tile and glaze to the existing tub so that looks brand new as well. He installed all the new fixtures and appliances in the kitchen. You can hire Jimmy for small jobs or very large jobs. His prices are very good and his quality is excellent. I highly recommend him and I will call him my self for future jobs.
Hello, We have a Hunter ceiling fan that no longer spins. It has power, as the light still works and when you push the remote you hear the clicking, like it's trying to engage, but the blades do not spin. Does this sound like a possible flywheel issue? I removed the Remote Receiver, part 85112-02, and apparently it's no longer available, but I don't think the receive is the problem. Any feedback would be welcome.

As a Carrier Factory Authorized Dealer, Edwards Heating & Air provides superior quality products and workmanship to home and business owners in Acworth and across Acworth, Alpharetta, Cummings, Cartersville, Kennesaw & Woodstock, GA.  Our NATE-certified technicians adhere to strict installation and service procedures, and are uniquely qualified to recommend the most cost-effective solutions to meet your exact needs and expectations.  Whether you are in the market for an HVAC system for new construction, a replacement unit, ductless options, heat pumps, or air conditioning, Edwards Heating & Air ensures a refreshingly cool and healthy home and work environment.  Through accurate sizing, precision installation, and conscientious maintenance, we help you enjoy maximum return from your investment and reliable operation, year after year.  For any cooling challenge you may face, the team from Edwards Heating & Air are your problem solvers, and we are always here when you need us, 24 hours a day, 7 days a week.


Vredevoogd Heating & Cooling technicians routinely assist our customers to figure out when it’s time to upgrade their Heating or Cooling system. Naturally, repairs are part of routine maintenance over the years. However, new models can save homeowners in a big way on energy expenses with their energy-efficient makeup. When you are ready to get a new system, we will do a careful check of your energy needs so that you can select the ideal system for your home’s needs. The wrong HVAC system for your home is a 15 year mistake that no one should have to afford. We install the right system for your home. Moreover, we offer guarantees that you won’t find just anywhere else. If your new installation isn’t right for your home, we’ll remove it free of charge at any time within that first year and refund 100% of your money. Our customers are burdened with no risks. We take on the risk because we are that sure of our expertise. We back our work with the strongest warranties in the field. In fact, we offer a wide array of warranties to provide you with the peace of mind you deserve as a valued Vredevoogd Heating & Cooling Grand Rapids MI customer.
Inspect your furnace thermostat by first making sure that it’s turned on. Also, ensure that the thermostat switch is turned to “heat” and not “cool”. If your furnace will still not start with the thermostat on, try adjusting the temperature settings to a few degrees higher. Inspect any visible wires for breaks or splits, and make sure your thermostat batteries are not dead. Do not touch any open wires; contact a professional.
Inspect your furnace thermostat by first making sure that it’s turned on. Also, ensure that the thermostat switch is turned to “heat” and not “cool”. If your furnace will still not start with the thermostat on, try adjusting the temperature settings to a few degrees higher. Inspect any visible wires for breaks or splits, and make sure your thermostat batteries are not dead. Do not touch any open wires; contact a professional.
We have done furnace services numerous times for last 10+ years. All that this technician did was to vacuum inside the furnace, asked me to turn on and turn off furnace, and said it is working fine. He didn't clean the burners, didn't check heating effectiveness, didn't check / change the filter ... Total rip off. I am calling amazon customer service.
When you change the temperature on your thermostat, or the temperature in your home drops, a signal lets the furnace's igniter know that it's time to turn on. Igniters exist in both hot water boilers and forced air furnaces, replacing pilot lights as the switch your unit needs to kick on. Naturally, this is a core part in making sure it works reliably. When it stops working, your unit will not longer know when to actually heat your home. Fortunately, furnace igniter repair doesn't tend to be a major budget problem, and costs less than $300 on average.
The thermocouple is a copper rod that the pilot flame heats-up. When it gets hot enough, the thermocouple signals that there is enough heat to burn the gas fuel being released into the appliance—and so it allows the gas to be released to the burners. In some cases where the pilot light won’t stay lit, the thermocouple needs to be adjusted or replaced. This is generally a job for a professional.

This job involves removing the access panel, loosening a couple of bolts that hold the blower motor at the proper tension, and adjusting its distance or realigning the belt. In many cases, it’s a good idea to remove the belt and buy a replacement at a home center. Last, when reinstalling the belt, be careful not to over-tighten it; this can wear out the motor bearings.
The main purpose of your furnace filter is to ensure that none of the additional materials your fans pull back into the unit - such as hair and dust - actually damage the furnace or its parts. In the process, it also improves air quality in your home. Some annual inspections will include changing and cleaning this part of the unit. That said, you can also clean or change your furnace filteryourself. Costs for new filters range based on brand, but tend to be around $30.
If you pull out your home’s air filter, hold it up to a light. If you can’t see light coming through it, it’s most likely been a while since your last heating service, and likely time to get a new one. If it’s a simple disposable air filter, just replace it with a like-size new one. It’s also a good idea to write down the date you installed the new filter, so you know how old it is next time it needs to be replaced. Check the filter packaging to see how long the new air filter is supposed to be used.

The cost to replace your entire unit is around $4,000. That expense can range from $2,500 to $5,900, depending on the type and brand of furnace you choose. Brands particularly have an impact on that price. A Goodman electric furnace, will only cost about $2,100 for the unit and labor. On the other hand, a Trane oil furnace may cost up to $9,000 all things considered. Our Furnace Installation Cost Guide can give you a better idea on both the general cost and the differences for brands like Amana, Bryant, Coleman, and others. The brand also plays into the repair cost for your furnace. Especially the prices of individual parts can change; a York heat exchanger, for example, can cost up to $1,900, while the same component from Heil will cost as little as $400.
Service Experts Heating and Air Conditioning was founded on the basis of providing customers with the best heating and cooling practices in the industry. Since its inception, Service Experts has been dedicated to community, providing the top of the line HVAC products and services in your area. If you want more information about your local HVAC leaders, call us at 866-397-3787 or set up an appointment with us online.
Our new HVAC unit started to leak badly, so we set up an appointment for an on-site diagnosis. The two-man crew arrived in the agreed-upon window and was very experienced. They gave off the impression that they had seen just about everything before. They quickly found the source of the problem, fixed it, and explained in full what they were doing and why. They also offered up some helpful tips of what to look for and how to self-diagnose issues.
Air Quality Services (AQS) provides you with professional and attentive home heating and cooling services to make sure that your systems do not fail you when you need them the most. We help clients within the Twin Cities area with our expert installation, tune-up, and repair services. Our clients in Bloomington, Edina, Chanhassen, Eden Prairie, Minnetonka, St. Louis Park, Excelsior, and other nearby areas can always count on our prompt heating and cooling expertise.
Lennox is another leading manufacturer and marketer of gas central furnaces. Lennox central furnaces are available in single and multistage configurations, with some models capable of an AFUE rating of more than 90 percent. Lennox markets units that meet Energy Star requirements and makes others that it claims offer quiet operation. The average price of a Lennox central gas furnace is about $2,500 and Lennoxes are sold through their dealer network.

CM Heating performed a Gas Furnace Diagnostic. Customer wanted his echo bee thermastat installed that he had bought himself. Furnace was working fine just wanted his thermastat installed. He thought that the $99 service fee was going to cover that but explained to him what the service fee was for, and explained that there is a additional install fee for the stat. Customer didn’t want to pay the additional fee so I called the office had them listen to the call to make sure we explained to the customer correctly and to see how they would like me to proceed. So I quoted the customer the fee to install the thermostat but he didn’t want us to install it so I left.


As a Carrier Factory Authorized Dealer, Edwards Heating & Air provides superior quality products and workmanship to home and business owners in Acworth and across Acworth, Alpharetta, Cummings, Cartersville, Kennesaw & Woodstock, GA.  Our NATE-certified technicians adhere to strict installation and service procedures, and are uniquely qualified to recommend the most cost-effective solutions to meet your exact needs and expectations.  Whether you are in the market for an HVAC system for new construction, a replacement unit, ductless options, heat pumps, or air conditioning, Edwards Heating & Air ensures a refreshingly cool and healthy home and work environment.  Through accurate sizing, precision installation, and conscientious maintenance, we help you enjoy maximum return from your investment and reliable operation, year after year.  For any cooling challenge you may face, the team from Edwards Heating & Air are your problem solvers, and we are always here when you need us, 24 hours a day, 7 days a week.
Cut down on energy costs and prevent damage to your furnace by addressing a gas furnace that's overactive or short cycling. Besides the need for consistently comfortable temperatures, this issue could cause long-term safety issues to your home, making it very important to address. From a faulty thermostat to a dirty filter, there are several possible causes to investigate.
×