High-efficiency condensing furnaces (90% AFUE and above) are a bit more complex than conventional furnaces. The main differences between a conventional and condensing furnace is the heat exchanger technology used to extract heat from the combustion process and the method used to exhaust the combustion gases. In these ways, the furnaces are very different. The condensing furnace does not have a significantly more efficient combustion process than does a conventional furnace; both use gas burners with electronic ignition. The difference lies in that the condensing furnace has a more efficient heat extraction process after combustion.
When you work with Bob’s, we make sure your furnace is properly sized and installed for optimal performance. When it comes to furnace installation in Renton, WA, Bob’s is dedicated to excellence, which defines our service. We know that professional furnace installation is the best way to protect its performance quality. Call today for more details.
As your trusted furnace maintenance company, we offer local service no matter where you live. We’ll have one of our professionally trained and certified technicians out to your home within two hours of your call. Best of all, it doesn’t matter whether you purchased your furnace with us or not—no matter the make or model of your heater, we can provide the furnace maintenance it needs.  Check out some of the other great benefits of doing business with us:
You can usually slip the belt on the motor’s (smaller) pulley first and then start it on the blower pulley. Rotate the blower pulley by hand, holding the belt in place but keeping your fingers from getting caught between the belt and the pulley. The belt should slip right into place. If it seems to be too tight or difficult to set in place, it may be necessary to adjust the motor mount to provide more slack.
Denver residents are encouraged to contact Brothers Plumbing, Heating and Electric when in need of fast repairs. If the house feels cold, it could be because the heating system is malfunctioning. When you give us a call, a Denver furnace repair expert will be at your aid right away for a complete diagnosis. We will always attempt to fix the furnace before considering a replacement. However, if the furnace cannot be repaired our Denver furnace repair experts will help you determine the best new furnace.
Over the past twenty years, we have used a number of different heating and cooling companies, none impressed us to use them more than once or twice. The service provided by A-TEMP was so outstanding; they will be our heating and cooling service provider for LIFE! Exceptional all around! It is nice to know why our home has three temperature zones and what we could do to improve it; plus the costs. Also, to understand the importance of regular maintenance-especially as it relates to carbon monoxide emissions. We appreciate the forewarning that our new system would be noisier due to the increased volume in our return system. We feel so blessed to know we do not have carbon monoxide emissions now and the furnace is the right size for our home. We feel like we won a million dollars with our new system!
Finally, don't underestimate the thermostat as a potential reason why your furnace is not working. Everything on the heating unit itself may function perfectly, but your home still will not heat right if the console you use to set the temperature doesn't communicate your input. A faulty thermostat can either be due to the wall unit itself, or the wiring that connects it to your furnace. Average thermostat repair costs are between $108 and $282, including labor. Replacement costs, of course, depend on the thermostat you choose. Visit our thermostat repair cost guide to learn more about this type of issue.
Our goal is to make you more comfortable in your home. When your furnace, central air conditioner, heat pump or boiler stops working and you need service, call the professionals at BGE HOME. Heating and cooling system breakdowns occur at the most inconvenient times, so rely on our certified, skilled technicians to make the repair quickly and correctly the first time.
Heat exchangers are the components that draw heat from the burned gas. To draw more heat from the air they burn, energy-efficient furnaces supplement the primary exchanger with a second exchanger. Because the exhaust gases in that second exchanger might yield a corrosive acidic condensate, the second exchanger is made of stainless steel, lined with plastic, or otherwise protected.
As a Bryant Factory Authorized Dealer, we meet rigid criteria for technical training, customer approval ratings, and insurance coverage. Serving the Chicagolands North Shore since 1940, we’ve honed our services to accommodate local issues and ensure maximum reward. Improving the health of our customer’s home and lifestyle, Effective Air offers cost-effective and expert service throughout Glenview, Kenilworth, Wilmette, Winnetka, Evanston & Northbrook, IL.
As a Carrier Factory Authorized Dealer, Edwards Heating & Air meets strict requirements for business practices, such as proper licenses, insurance and liability coverage, and customer service.  Our technicians participate in continued factory training, keeping current with advancements in techniques and technology, and adhere to strict installation and maintenance procedures.  Our sales team is educated in leading-edge Carrier products, ensuring accurate recommendations for cost-effective, highly efficient, and reliable solutions to your specific circumstances.  We specialize in heating, cooling, and air quality systems that are widely regarded as the world’s best.  Leading the industry in design and engineering, Carrier products offer unprecedented convenience, economy, and luxury.  These systems don’t just regulate temperature.  They improve your everyday life.
We are aware that furnace repair in Denver can be pricey depending on what is malfunctioning. We are always ready to work with you within affordable means. You should not be overwhelmed or worried. We will help you maintain your system longer by treating parts, replacing filters, and cleaning the system. Prior to any furnace repair in Denver, diagnosis is a priority. We always aspire to be the best when satisfying all our customers from the moment you call to the time we leave your home. We analyze your heating system thoroughly and offer you furnace repair that is economical. Contact us for immediate assistance in Denver. To learn what it takes to become one of our team of professional furnace repair technicians, just click HERE.
The heating installation process must be completed by a professional heating technician. There is simply no other way to make sure that your furnace is correctly integrated into the home. We take care of every detail, from the gas piping for the furnace to the ducts placed behind walls and in ceilings. Give us a call today to find out more about our Federal Way heating installation service.
We are committed to providing you with services that are effective and efficient. We do the job right the first time, but more importantly, we won't charge our customer when we didn’t fix it the first time. For almost 30 years, we have been providing our customers with work from industry-certified technicians. Our team has the skill and knowledge to get the job done right the first time out!
Let us take care of your water heater replacement in Federal Way, WA so that the job is done correctly the first time. We can make sure that your home has exactly what it needs for bountiful hot water. We offer a number of different makes and models to replace your old one, and we can ensure that it integrates seamlessly with the rest of your plumbing. Call Bob’s Heating & Air Conditioning today.
When you change the temperature on your thermostat, or the temperature in your home drops, a signal lets the furnace's igniter know that it's time to turn on. Igniters exist in both hot water boilers and forced air furnaces, replacing pilot lights as the switch your unit needs to kick on. Naturally, this is a core part in making sure it works reliably. When it stops working, your unit will not longer know when to actually heat your home. Fortunately, furnace igniter repair doesn't tend to be a major budget problem, and costs less than $300 on average.
Mechanical air filters trap pollutants by filtering them out of the air as it passes through. Electronic air cleaners pull air in, give the pollutants in that air a static charge, and trap those pollutants on an oppositely charged surface. By working with a qualified professional you can rest assured that you have the right air filtration system in Seattle, WA.
Two nights ago our smoke alarm went off during the night...after a frantic search through the house we traced the source of the smoke to the furnace.  After reading reviews about Affordable Furnace Repair we decided to give them a try...and we are SO GLAD WE DID!  Within 10 minutes of leaving a message I received a call back and was scheduled the next day.  The source of the problem was immediately identified and promptly fixed....a previous repair had messed up some wiring as well which was also fixed and now we are so glad to be back to 100%.  Can't say enough about the professionalism, responsiveness and service.  Highly recommend.

Yes. You should expect to pay a diagnostic fee to cover the cost of the technician's visit, the diagnosis of your air conditioner's problem, and a quote for the repair options. You will be advised of the issue along with recommended options to correct it, which may include a system replacement if your unit is old or significantly damaged. If you decide to replace the system, the diagnostic fee will be credited toward your replacement purchase.
As a family business owned and operated by the Young family, we have been providing quality air conditioning repair and heating service since 1992. Allow us to show you why we deliver “peace of mind” by virtue of everything we do to make your home environment as comfortable and healthy as it can possibly be. If you need service in the Eastern Panhandle, WV area, we’re here to help! Call today!
Thank you, thank you, thank you for sharing your knowledge. I just replaced our shower cartridge and our leak is FIXED!!!!!!! Your instructional was clear and concise. I did purchase 2 cartridges first, because I did not know the type it was and could not pull it out without the plastic cover it comes with. Fortunately, it was one of the two. By the way I'm a 63 year old woman. If I can do it, anyone with internet and a little patience and an hour can do it.....
American Standard manufactures and markets central furnaces that are available in single and multistage configurations, with some models capable of an AFUE rating of more than 90 percent. American Standard markets units that meet Energy Star requirements and makes others that it claims offer quiet operation. The average price of an American Standard central gas furnace is about $3,000 and American Standards are sold through their dealer network.

Moreover, our HVAC technicians also offer professional heating repair and maintenance as part of our heating systems service in Federal Way, WA. Whether you find yourself with insufficient heat or a high energy bill, it’s worth keeping a close watch on your heating system, whether you have a furnace or a heat pump. We can keep your heating system in good shape with maintenance.
First, check to be sure that your thermostat is set to “heat” and not “cool,” and ensure that the fan is set to “auto.” Then, check to be sure that the thermostat is set to a temperature high enough to trigger the furnace to emit heat. If your thermostat is properly set, ensure that it is getting power — check batteries, fuses and circuit breakers — and ensure that the interior components are clean. Dust and debris inside the thermostat can cause it to malfunction. Fortunately, this is usually an easy fix. In some cases, a malfunctioning thermostat may require adjustment or replacement.  
Tyler M came to my house today to clean the furnace fan and motor, and to check the furnace efficiency. He arrived on time, did a great job on the furnace. The fan was really dirty and did more work than was requested as a courtesy - and still charged the quoted price. Tyler was friendly, courteous, very knowledgeable, and was very efficient in completing the work. I would definitely recommend Tyler M and Swan plumbing and Heating for excellent work at a very reasonable price.
We tend to have fairly moderate winters in Federal Way, WA, and that means a heat pump works well down here. A heat pump works much like a central air conditioner in that it circulates a refrigerant that transfers thermal energy from one place to another. But heat pumps not only cool your home during the summer, but also heat your home during the winter.
We are so happy we selected Clarence with CAL Property Care to repair our furnace. He was very easy to schedule an appointment with and actually came out on a Saturday to figure out what the issue was. Clarence had to order a part to complete the repair, but he promptly updated us with the progress every step of the way. Clarence really went above and beyond and I can't say enough for his friendly attitude and quality of work! Thanks again Clarence!
We also offer a great selection of electric furnaces in Seattle, WA. While natural gas does tend to cost less to purchase than electricity, today’s electric furnace models are so efficient that they can really close the price gasp. Call our Seattle furnace experts if you are interested in learning more about the benefits of heating your home with an electric furnace.

We are committed to providing you with services that are effective and efficient. We do the job right the first time, but more importantly, we won't charge our customer when we didn’t fix it the first time. For almost 30 years, we have been providing our customers with work from industry-certified technicians. Our team has the skill and knowledge to get the job done right the first time out!
Furnace Service and Repair in Snohomish , WA Furnace Service and Repair in Woodinville , WA Heating Repairs in Bothell , WA Heating Repairs in Everett , WA Furnace Service and Repair in Everett , WA Gas Fireplace, Gas Logs Service in Bothell , WA Water Pipe Replacement Services in Bothell , WA Service in Everett , WA Water Pipe Replacement Services in Everett , WA Water Pipe Replacement Services in Stanwood , WA Service in Mukilteo , WA Furnace Service and Repair in Edmonds , WA Furnace Service and Repair in Seattle , WA Gas Fireplace, Gas Logs Service in Everett , WA Heating Repairs in Mukilteo , WA Service in Snohomish , WA Gas Fireplace, Gas Logs Service in Stanwood , WA Furnace Service and Repair in Lake stevens , WA Service in Bothell , WA Pellet Stove Service or Repair in Everett , WA Chimney Repair in Seattle , WA Furnace Service and Repair in Bothell , WA Fireplace Cleaning in Everett , WA Gas Fireplaces and Gas Logs in Bothell , WA Gas Fireplaces and Gas Logs in Kenmore , WA
Don has earned a lifetime customer! My wife and I moved into our fixer-upper house this summer and just when the weather turned we realized that the 8 year old Goodman furnace in our basement had rusted heat exchange pipes and was leaking carbon monoxide. (So much for the $400 I paid to an home inspector before we moved in...) Fortunately, the furnace had a warranty still active. Not so fortunately, Goodman was incompetent in getting us the replacement part. It took them a month to send it, and then it wasn't even the right part. Don went to bat for us and convinced Goodman to foot the bill for an entirely new furnace! He and another worker made time in their busy schedule during thanksgiving week to come out and get the unit installed. This is above and beyond service and I couldn't be happier.
Jeremi came out and serviced our air conditioner, checked our furnace, replaced our filter, set our thermostat and cleaned our alot of cottonwood out or our air conditioner on the side of our house. He was a great technician and did and great job. after he adjusted everything and cleaned out the vents in the air conditioner outside the house was cooler than it was. He is a nice man and very personable. Both my wife and I were very happy and satisfied with his work. the service was done on Thursday, July 21st, 2016
When your furnace isn’t regularly serviced it can operate less efficiently. This increases your energy bills and also prevents your furnace from keeping your home as warm as you like. Keep your furnace properly maintained with regular service. The national average furnace service cost is between $60 and $80. Companies may offer tuneup specials that cover all the necessary testing, tightening, measuring and cleaning to keep your equipment running at top efficiency. If you have a newer system, furnace service costs may be covered by your warranty. Outside of warranty, a basic tuneup might start at $58 and a more advanced maintenance cleaning could be over $120. Here are some signs your furnace may need service:

If your furnace has a pilot light, look for the flame. Check your owner’s manual or the instructions posted inside the furnace cabinet for step-by-step lighting instructions. Usually this involves first turning the gas valve to Off and waiting a couple of minutes. Then you turn it to Pilot. Next, press and hold it down while you light the flame. Last, wait a minute or so, release it, and then turn it to On.
×