There are many signs that can indicate the need for professional air conditioning repair service in Seattle, WA. You may notice that your air conditioner does not cool your home evenly, or that there is a spike in your air conditioning costs. Regardless of what tips you off, it is important that your air conditioning repair services are completed properly.
With a modern heat pump system installation, you’ll enjoy benefits such as exceptional efficiency and maximum temperature control all year round. These innovative systems combine both heating and cooling into one compact system. The technicians from Sky Heating & Air Conditioning are highly qualified and experienced in heat pump maintenance, repairs, and installations, so you can feel confident in our services. We specialize in WaterFurnace geothermal heat pump systems, which offer unprecedented efficiency and energy savings. Browse our website or give us a call today to learn even more!
For starters, once a year, vacuum out the area around the furnace’s blower. If possible, also slide out the fan unit, clean each fan blade with a toothbrush, and then vacuum with a brush attachment on a vacuum cleaner. While you’re at it, look for oil ports on the motor, normally located near the motor shaft. If the motor has these, apply two to three drops of non-detergent motor oil into each port (you may have to remove a cover plate to do this). Though most contemporary motors don’t require lubrication, do lubricate motors with oil ports once a year. For more about maintenance, see Maintenance Checklist for Central Heating Systems.
As a family business owned and operated by the Young family, we have been providing quality air conditioning repair and heating service since 1992. Allow us to show you why we deliver “peace of mind” by virtue of everything we do to make your home environment as comfortable and healthy as it can possibly be. If you need service in the Eastern Panhandle, WV area, we’re here to help! Call today!
Inspect your furnace thermostat by first making sure that it’s turned on. Also, ensure that the thermostat switch is turned to “heat” and not “cool”. If your furnace will still not start with the thermostat on, try adjusting the temperature settings to a few degrees higher. Inspect any visible wires for breaks or splits, and make sure your thermostat batteries are not dead. Do not touch any open wires; contact a professional.

As your water heater operates it will incur some general wear and tear; there is no way to prevent this. With the help of a Seattle, WA water heater maintenance specialist, though, you can keep this wear and tear from developing into major headaches down the road. We’ll make sure that your water heater is in the great operating condition you deserve.
As a Carrier Factory Authorized Dealer, Ashworth Heating & Cooling is qualified in the most sophisticated and effective options in heating, cooling, and air quality.  We adhere to strict installation and maintenance procedures, and extend our standards of excellence into every facet of our services.  Established in 1995, our dedication to your satisfaction upholds a complaint free A+ rating from the Better Business Bureau.
As your air conditioner operates, it is going to suffer some general wear and tear. There is really no way in which to avoid this. However, wear and tear does not have to result in serious problems with your air conditioning system. Just make sure that you schedule professional air conditioning maintenance in Seattle, WA in order to keep your system in great working condition.
The national average for furnace replacement is between $1,800 and $2,500. The cost can range dramatically higher depending on the model of furnace you select, any repair work you require, your location and the cost of installation. Furnace installation costs can be more than the furnace itself due to the cost of doing business and the expertise needed to install the HVAC equipment. Installing a new furnace generally requires technical know-how and the proper tools and licensing. It’s best to hire a pro and budget for furnace installation rather than risk potentially unsafe DIY installation. This will ensure your home’s safety. Check to see if your HVAC contractor has the proper licensing to do the job. If you need duct repair or replacement, expect to pay more for your furnace installation costs. The price for duct repair could be an hourly rate ranging on average anywhere from $85 to $150 per hour, with additional costs for parts.
In this video I show you a few things to look for to fix your furnace. It's expensive to call a repair man and most of the time is not needed. I am not an expert, just someone trying to share my experience with you to save some money. Always turn your power to your furnace off before tampering with things. This would be a good video to start with because I try to show a general idea of how a furnace works. When all else fails, you have to call an expert, but first try the steps in this video.

As you decide, insist that the contractor select models in a range of efficiencies and calculate the annual estimated operating cost of each model you're considering, rather than simply estimating it. The contractor can complete those calculations by plugging information on each unit's AFUE and electrical consumption, local utility rates, and characteristics of your home into one of several computer programs designed to easily calculate estimates. Make sure that the quotes also include the cost of any changes to venting required by any appliances in the home.

As your water heater operates it will incur some general wear and tear; there is no way to prevent this. With the help of a Seattle, WA water heater maintenance specialist, though, you can keep this wear and tear from developing into major headaches down the road. We’ll make sure that your water heater is in the great operating condition you deserve.
The national average for furnace replacement is between $1,800 and $2,500. The cost can range dramatically higher depending on the model of furnace you select, any repair work you require, your location and the cost of installation. Furnace installation costs can be more than the furnace itself due to the cost of doing business and the expertise needed to install the HVAC equipment. Installing a new furnace generally requires technical know-how and the proper tools and licensing. It’s best to hire a pro and budget for furnace installation rather than risk potentially unsafe DIY installation. This will ensure your home’s safety. Check to see if your HVAC contractor has the proper licensing to do the job. If you need duct repair or replacement, expect to pay more for your furnace installation costs. The price for duct repair could be an hourly rate ranging on average anywhere from $85 to $150 per hour, with additional costs for parts.
Our new HVAC unit started to leak badly, so we set up an appointment for an on-site diagnosis. The two-man crew arrived in the agreed-upon window and was very experienced. They gave off the impression that they had seen just about everything before. They quickly found the source of the problem, fixed it, and explained in full what they were doing and why. They also offered up some helpful tips of what to look for and how to self-diagnose issues.
We offer a number of indoor air quality products and services in Federal Way, WA, including air duct cleaning, air filtration systems and duct sealing. Keeping your ducts in good shape is a great way to prevent noxious particles from accumulating therein. A whole–house air filter is the best way to remove contaminants. Call Bob’s Heating & Air Conditioning today for more details.
If you own a forced–air distribution system, then you need to ensure that you take care of your ductwork. After all, your central AC or heat pump is only as effective and efficient as the cleanliness and integrity of the ducts that transport your conditioned air. With our air duct cleaning service in Federal Way, WA, your HVAC system is in good hands.

When it comes to heater repair in Denver, a properly serviced system means significant savings for the homeowner. When a Denver heating technician inspects your system before the winter sets in, the first thing they will check is the condition of the air filters. These filters are important, because they are responsible for removing contaminants, allergens, and dust particles from the air every time the system is turned on. When the filters are clogged, expect more particles to easily pass through right into the air you breathe inside the home. The Denver heating experts will inspect and replace any filters that are no longer effective.
The motor belt should be firm, giving no more than ½ inch when pressed. It should also be free of cracks and damage. To remove the belt, you will need a wrench and a replacement belt. Loosen, do not remove, the motor bolts. You only need them loose enough to move the motor and slacken the belt. Remove the belt and inspect it, replacing it with a new one if necessary. Belt: $4.00 to $6.00.
About us: Vredevoogd Heating & Cooling has been in business since 1964. As a financially stable company known for its reliable expertise and first-rate customer care, Vredevoogd Heating & Cooling is a company you can trust. Moreover, when you do business with a stable business like Vredevoogd Heating & Cooling, you have the peace of mind of knowing that your warranties are solidly backed by a company that intends to remain in business for another 50+ years and beyond. Don’t trust your essential home systems and investment to any fly-by-night company. Our best practices ensure that we will be here to meet our customer’s HVAC needs for decades to come. Vredevoogd Heating & Cooling founder Dennis Vredevoogd set the high standards by which the company continues to pride itself for. Today, the company continues to be family owned and operated by the founder’s sons, Michael and Thomas, who are committed to maintaining the company’s high standards and complementing them with the innovative technical know-how needed to service today’s advanced HVAC systems.
I'd had them come out before and called because my thermostat wasn't getting power. They said they don't service townhomes. I said that must be a new policy because they've been out before and she said they've had it for awhile. I tried to ask why they don't service townhomes and she said they don't service attached homes or commercial properties. I said that my home isn't commercial and it doesn't really answer my question, but I guess I'll go elsewhere. I couldn't find this policy on their website and I can't really understand why a townhome furnace would be different than an unattached home. When they came out before I seem to remember they did a good job, so it's too bad they have odd policies now.
A whole–house air conditioning system in Federal Way, WA is by no means a luxury, but a necessity. At Bob’s Heating & Air Conditioning, our Federal Way air conditioning system specialists work with customers to ensure that their homes are comfortable all summer long. There is simply no other way to ensure that you and your family are cool during the summer than by having your cooling system service completed by a professional Federal Way air conditioning technician.
For starters, once a year, vacuum out the area around the furnace’s blower. If possible, also slide out the fan unit, clean each fan blade with a toothbrush, and then vacuum with a brush attachment on a vacuum cleaner. While you’re at it, look for oil ports on the motor, normally located near the motor shaft. If the motor has these, apply two to three drops of non-detergent motor oil into each port (you may have to remove a cover plate to do this). Though most contemporary motors don’t require lubrication, do lubricate motors with oil ports once a year. For more about maintenance, see Maintenance Checklist for Central Heating Systems.
Adam V. from Swan Plumbing & Heating of Denver, CO came out and tuned up our furnace and A/C units. He was courteous prompt and professional, but beyond that went out of his way to give us recommendations on things we can do to get the most life and performance out of our existing equipment. When we are ready for upgrades and additional services, Swan will be our first (and only) call.
As your water heater operates it will incur some general wear and tear; there is no way to prevent this. With the help of a Seattle, WA water heater maintenance specialist, though, you can keep this wear and tear from developing into major headaches down the road. We’ll make sure that your water heater is in the great operating condition you deserve.
Gerardo was very professional and kept us informed of what he was doing and what was needed. Our house is now the warmest it has been since we purchased it 3 years ago! And all of this was done on a Saturday morning with below freezing temps! We are very thankful and will be using Gerardo of True Comfort again when have the money to replace the furnace altogether.
I hired Scoa remodeling to work on a house built in 1953 that I am about to sell. There was rotten wood all along the exterior facia which needed replacing and painting. Mr. Wilkins proposed a plan to repair the wood, and pressure wash and paint the exterior. His work was quick and very professional so I hired Scoa to paint the interior and fix some buckled dry wall. Mr. Wilkins repaired dry wall, fixed a minor mold problem and painted the interior of the house. The work took about 1 1/2 months and was very professional. He gave me a fair price on all the work. I will hire him again at my next place. Also, I hired Jimmy for an entire home remodel and he handled the entire renovation for me. He painted the interior and exterior and painted the kitchen cabinets so now they look brand new. He installed brand new hardwoods in the kitchen and sanded and polished the existing hardwoods so they look brand new also. He renovated two bathrooms with new tile and glaze to the existing tub so that looks brand new as well. He installed all the new fixtures and appliances in the kitchen. You can hire Jimmy for small jobs or very large jobs. His prices are very good and his quality is excellent. I highly recommend him and I will call him my self for future jobs.
To be sure of correct sizing and a proper installation, choose a reputable contractor who will take the time to calculate your heating needs according to an industry standard such as in "Manual J HVAC Residential Load Calculation" of the Air Conditioning Contractors of America. Such calculations take into account the climate and the size, design, and construction of your house. Once the furnace is installed, maintain it regularly according to the manufacturer's recommendations. Our survey helped to confirm this advice. When we asked about the most common reasons for service calls for furnaces, contractors cited human error, inadequate maintenance, for example, or improper installation, twice as often as defective equipment. Read our frequency of repair report for which brands or the most and least reliable.
Vredevoogd Heating & Cooling stands behind its services and products with the strongest guarantees you’ll find anywhere. When you invite us into your home to service or install your HVAC system or do Furnace Repair work in Grand Rapids and beyond, we perform our job with an outstanding level of care and efficiency. Having served Michigan for 54 years, we never rest on our laurels. To remain the best, we intend to give our best every time, every job.
As a Carrier Factory Authorized Dealer, M and M, Heating & Cooling, Plumbing & Electrical is qualified to properly size and install the most technologically advanced and well-regarded heating, cooling, and air quality products on the market today. Our team is NATE-certified, factory trained, EPA certified, and regularly updated, ensuring the right solution to any challenge.
With a modern heat pump system installation, you’ll enjoy benefits such as exceptional efficiency and maximum temperature control all year round. These innovative systems combine both heating and cooling into one compact system. The technicians from Sky Heating & Air Conditioning are highly qualified and experienced in heat pump maintenance, repairs, and installations, so you can feel confident in our services. We specialize in WaterFurnace geothermal heat pump systems, which offer unprecedented efficiency and energy savings. Browse our website or give us a call today to learn even more!

Are you in the market for a new furnace? Do you find it difficult to narrow down your options? We offer professional heating installation in Federal Way, WA that can outfit your home with a heating system in no time. Our Federal Way heating installation technicians are skilled at helping each customer select a furnace that not only works for their budget, but also for their living space.
As the largest heating company in the Northwest, Washington Energy Services has fixed thousands of heating systems. We service most major brands of heating equipment, including York, Bryant, Carrier, Lennox, Coleman and Rheem. Our NATE certified, factory trained service technicians are standing by for furnace service, and also heat pump and air conditioning repair. Home owners from Sea-Tac to Lynnwood trust Washington Energy Services for furnace service and repair. Schedule your service today!
Appointment was scheduled between 8am and 11 am, technician called and said that he will at 11 am, technician arrived at 11:23am. The request for service was regarding Furnace Maintenance, more specifically fan won't stop turning after heater has stopped after reaching desired temperature. Service was provide by Sam Singh from WesternAir Mechanical Heating & Air Conditioning. The mechanic opened the side panels of the heater+ac unit and concluded that the unit is too old for maintenance, as in it is not worth it, even though I have already payed $94.19 through Amazon.com. The mechanic spend close to one hour explaining how my heater+ac unit is too old for any updates and that it should just be replaced. I didn't receive any of the services that are included in the Furnace Maintenance package listed on Amazon.com. https://www.amazon.com/gp/product/B015JRGSQI/ref=od_aui_detailpages00?ie=UTF8&psc=1 I was ripped off my this company and I would very much like my money to be returned to me. Opening and closing the panels of my unit doesn't cost more than $2, I can do that by myself.
Service Experts Heating and Air Conditioning was founded on the basis of providing customers with the best heating and cooling practices in the industry. Since its inception, Service Experts has been dedicated to community, providing the top of the line HVAC products and services in your area. If you want more information about your local HVAC leaders, call us at 866-397-3787 or set up an appointment with us online.
Lennox is another leading manufacturer and marketer of gas central furnaces. Lennox central furnaces are available in single and multistage configurations, with some models capable of an AFUE rating of more than 90 percent. Lennox markets units that meet Energy Star requirements and makes others that it claims offer quiet operation. The average price of a Lennox central gas furnace is about $2,500 and Lennoxes are sold through their dealer network.
AQS is all about offering clients the best possible value. We honor manufacturer warranties for any equipment you purchase from us. Moreover, we provide workmanship warranties for our maintenance services because we want you to be extremely satisfied not only with your heating and cooling units, but with our level of service as well. Allow us to be your partner in maintaining your systems; we will not disappoint you.
What does air conditioning maintenance mean? Well, it means much more than just changing the air filter. Over time, its internal components may accumulate a substantial amount of dust and other debris that can begin to take its toll on system performance and energy efficiency. Let us take care of your cooling system with our air conditioning maintenance in Federal Way, WA.
Superior AC & Heat inspected my furnace on Monday and determine that I needed to replace the furnace. Since I was also desiring to add AC to my home, I decided to bundled both projects and get a new furnace and AC Unit together. The team arrive at my home Wednesday morning at 7:45 am; the new furnace was installed by 1:00 pm and they completed the AC Unit, tested it and cleaned up by 4:30 pm. Great work; I highly recommend them.
Simply put, we put ourselves into our customers shoes and understand that these assurances do more than provide financial protection- they provide peace of mind. Our success is completely dependent on the satisfaction of our customers, so we're willing to do whatever it takes to complete the job to your satisfaction and show you why we're the most trusted when it comes to Plumbing, Heating, Air Conditioning & HVAC in Denver, Colorado!
Moncrief provides a wide range of services from high-quality energy-efficient systems, tune-ups and inspections, as well as repairs in the Roswell and Marietta areas. As a full-service heating and cooling company, we stay up-to-date on the most economical and energy-efficient systems available for your home or business. In addition, our technicians are well-trained in a wide range of systems to provide quality and cost-efficient furnace service, repairs and installation.
We offer a wide range of air conditioning services in Federal Way, WA, from the installation of new systems from scratch to the replacement of old models that have seen better days. We can also make sure that your air conditioner is routinely cleaned and inspected with our routine maintenance. As always, our air conditioning technicians are available to repair your AC at a moment’s notice. Call us today for professional air conditioning service.
At Horizon Services, we strive to go above and beyond for every one of our clients. We offer honest, upfront pricing in writing for every service we provide, as well as flexible scheduling to suit your needs, industry leading warranties, and a 100% customer satisfaction guarantee. When you call on us for heating services, our technicians will arrive on-time, every time. If we're even one minute later than the provided window of time, you don't pay. We understand that dealing with a broken or malfunctioning heating system can be incredibly frustrating. Let us turn your stressful situation into a thing of the past!
Jeremi came out and serviced our air conditioner, checked our furnace, replaced our filter, set our thermostat and cleaned our alot of cottonwood out or our air conditioner on the side of our house. He was a great technician and did and great job. after he adjusted everything and cleaned out the vents in the air conditioner outside the house was cooler than it was. He is a nice man and very personable. Both my wife and I were very happy and satisfied with his work. the service was done on Thursday, July 21st, 2016

We are open from 7am to 10pm every weekday and from 7am to 8pm on weekends. We book appointments in a 2 hour arrival window and call 30-45 mins before we arrive so you do not have to sit around waiting. It is often possible to schedule your appointment in the evening or morning hours to avoid conflicting with your work schedule. Are you looking for service today? Give us a call or click on one of the Schedule Service buttons found on the top and left sides of this page to contact us today.
×