Zach came early, which I very much appreciated, and got the job done quickly. He was unfailingly polite and took care with putting on the booties and keeping my carpet clean. He managed to get the sprinkler system turned off even though I was quite uninformed about it and could help very little beyond pointing to where things were. I am always happy to have Brothers people come out to do my plumbing, heating, & electric services.
Customer called requesting standard maintenance on their gas furnace and their tankless water system. System is running well, all components are within manufacturers specifications. No issues other than thermostat which home owner is aware of. Recommend annual maintenance Tankless Maint - Unit has been flushed and inspected. All operations normal at this time.

American Standard manufactures and markets central furnaces that are available in single and multistage configurations, with some models capable of an AFUE rating of more than 90 percent. American Standard markets units that meet Energy Star requirements and makes others that it claims offer quiet operation. The average price of an American Standard central gas furnace is about $3,000 and American Standards are sold through their dealer network.


Wife and I bought a fixer-upper last year. One of the issues it had was a lack of heating for the house. I called Affordable Furnace Repair and they sent Don out. He checked on the furnace and found one of the heating elements had gone bad. He fixed it quickly and we had a warm winter. Plus we got a box of filters for cheap from him, all around good service.
Given the broad price ranges above, it's easy to recognize that the cost of your furnace repair varies drastically based on which parts need attention. As a result, it makes sense to gain a better understanding of the parts that heat your home, and how much they cost to repair. Repairing or replacing your furnace’s blower motor can cost you anywhere between $150 and $450, depending on the extent of the damage. Heat exchanger repair costs can vary greatly, from as little as $100 for a simple fix to as much as $1,200 for a full replacement. Repairing a furnace igniter will only cost you $300 at most, while flame sensor repairs generally fall between $80 to $250. The average cost to repair your Thermostat will range from $108 to $282.

As a Bryant Factory Authorized Dealer, we meet rigid criteria for technical training, customer approval ratings, and insurance coverage. Serving the Chicagolands North Shore since 1940, we’ve honed our services to accommodate local issues and ensure maximum reward. Improving the health of our customer’s home and lifestyle, Effective Air offers cost-effective and expert service throughout Glenview, Kenilworth, Wilmette, Winnetka, Evanston & Northbrook, IL.


Jeremi came out and serviced our air conditioner, checked our furnace, replaced our filter, set our thermostat and cleaned our alot of cottonwood out or our air conditioner on the side of our house. He was a great technician and did and great job. after he adjusted everything and cleaned out the vents in the air conditioner outside the house was cooler than it was. He is a nice man and very personable. Both my wife and I were very happy and satisfied with his work. the service was done on Thursday, July 21st, 2016

Whether you are in need of new installation, system replacement, seasonal maintenance, or prompt repair, M and M, Heating & Cooling, Plumbing & Electrical lives up to your highest expectations for quality, pricing, reliability, and quick turnaround on all projects.  And our commitment isn’t limited to regular business hours.  We’re always available when you need us, providing 24 hour Emergency Service across Longmont, Dacono, Frederick, Firestone, Mead, Erie & Johnstown, CO.  Trust the #1 Rated and Certified – A/C, Heating, and Plumbing Experts.
Vredevoogd Heating & Cooling Grand Rapids MI routinely serves the areas of Grand Rapids, Wyoming, Lansing, Grandville, and Kalamazoo. We provide a comprehensive menu of HVAC services delivered by certified HVAC technicians who specialize in heating and cooling repair and installation. World-class customer service is a cornerstone of our business and we are committed to doing the job right the first time. We have a reputation for integrity and service excellence. By living up to our good name, we continue to build our customer base throughout the Michigan region and look forward to adding you to our service family. So if you are looking for a “heating & air company near me” in Grand Rapids, or a Furnace Repair Lansing, Furnace Repair Kalamazoo and more. Call today.

Vredevoogd Heating & Cooling Grand Rapids values each and every customer. Servicing or installing your HVAC system means establishing a service relationship with each homeowner. We promise to earn your trust with our consummate level of professionalism and expert service. We back our work with the strongest industry guarantees because we value your continued business.
Hi This is my 1st summer owning this house. My electric bill has been doubling for 3 months in a row..I have a Carrier 25HPA6 Performance Series 2 Stage Heat Pump...I recently went online and found instructions on how to clean the outdoor unit. I did so and it was not very dirty. I also have a generator that kicks on when I lose power which does not support the AC unit..We did lose power for a few days recently. I have 2 faults showing on the heat pump unit..one being 53 outdoor air sensor not reading or out of range 255 events and F 37 control fault, heater stuck on 13 events.It is set to cool and the fan to auto. I have never had a heat pump or central Air and am very green to this.The previous owners left no manuals.I have found one online but for installation only. PLease help?

We also offer a great selection of electric furnaces in Seattle, WA. While natural gas does tend to cost less to purchase than electricity, today’s electric furnace models are so efficient that they can really close the price gasp. Call our Seattle furnace experts if you are interested in learning more about the benefits of heating your home with an electric furnace.
Are you in the market for a new furnace? Do you find it difficult to narrow down your options? We offer professional heating installation in Federal Way, WA that can outfit your home with a heating system in no time. Our Federal Way heating installation technicians are skilled at helping each customer select a furnace that not only works for their budget, but also for their living space.

Like all mechanical systems, your heat pump or gas furnace might run into trouble eventually. Stay alert to any sudden changes in the way that your furnace operates, such as loud or strange sounds as well as a spike in your energy bills. Our Federal Way heating repair technicians can restore the functionality and efficiency of your furnace in no time.


Vredevoogd Heating & Cooling Grand Rapids employs more than 80 people who are proud to work under the Vredevoogd Heating & Cooling banner. Each team member shares our company values for service excellence. All of our employees are intensely screened and background checked so that you have peace of mind when they enter your home. Moreover, our technicians are certified to work in the HVAC industry and provide the level of expertise that our customers expect from Vredevoogd Heating & Cooling. We back our technicians’ work and continue to make training a priority so that all of our techs are familiar with the latest HVAC models and advances. Our customers deserve the best, so the best is what we deliver to each and every job.
You might guess it from the name: the heat exchanger is the part of your furnace that actually heats the air your blower motor pushes through the furnace. It consists of a chamber in which the heat energy produced by natural or propane gas is transferred to the forced air. At the same time, this part also includes a vent through which the gases themselves are safely removed from the unit and the air that enters your home. Because of these gases, a problem with your heat exchanger needs to be dealt with promptly. Over time, cracks in the exchanger can result in carbon monoxide leaks. Taking care of the problem once again means understanding the existence of a range: repairing your heat exchanger can cost as little as $100, but a full replacement may cost up to $1,200.
Your heating, cooling, and air quality systems are a significant investment, and are expected to answer high demand, day after day, year after year.  To enjoy the greatest benefit from your equipment, let the professionals from Edwards Heating & Air handle the essential upkeep.  Through conscientious, seasonal maintenance, we effectively restore operational sound and efficiency levels, improve air quality, eliminate the majority of repairs, and extend service life.  The key to safe and uninterrupted performance, lower overall costs, and superior temperature control is through proactive measures.  The NATE-certified technicians from Edwards Heating & Air complete a lengthy task list that is specifically targeted at the optimization of your system.  Not only will your HVAC system be ready and able to handle volatile weather conditions, but it will operate safely.  Comprehensive service from Edwards Heating & Air is your best protection against health concerns, property damage, system failure, and elevated cost of ownership.  Contact Edwards Heating & Air, and we'll set up a maintenance plan that is affordable, convenient, rewarding, and works perfectly for you.

We tend to have fairly moderate winters in Federal Way, WA, and that means a heat pump works well down here. A heat pump works much like a central air conditioner in that it circulates a refrigerant that transfers thermal energy from one place to another. But heat pumps not only cool your home during the summer, but also heat your home during the winter.


Gas is currently the most common heating fuel and most new central-heating systems use gas. How efficiently a furnace converts gas into heating energy is reflected in its annual fuel-utilization-efficiency (AFUE) rating, which is measured as a percentage. The higher the number, the more heat the furnace can wring from each therm of gas. Since efficient furnaces generate fewer emissions, environmental considerations might also influence your decision.
24HR Home Comfort Services, is a Wisconsin and Illinois Heating, Cooling, Air Conditioning, Geothermal Heat Pump, and furnace repair, service, replacement and maintenance Company located in Rock County WI and McHenry County IL. 24HR Home Comfort Services employs only the best technicians for air conditioner repair and, furnace repair as well as all air conditioner replacement, furnace replacement and boiler replacement in Afton WI, Avalon WI, Beloit WI, Brodhead WI, Brooklyn WI, Burlington WI, Cambridge WI, Clinton WI, Darien WI, Delavan WI, Dousman WI, Eagle WI, East Troy WI, Edgerton WI, Elkhorn WI, Evansville WI, Fontana WI, Footville WI, Fort Atkinson WI, Hanover WI, Janesville WI, Jefferson WI, Johnson Creek WI, Lake Geneva WI, Lake Mills WI, Lyons WI, Madison WI, Marshall WI, McFarland WI, Milton WI, Mukwonago WI, North Prairie WI, Oconomowoc WI, Oregon WI, Orfordville WI, Palmyra WI, Rockton WI, Roscoe WI, Sharon WI, South Beloit WI, Stoughton WI, Sullivan WI, Sun Prairie WI, Walworth WI, Watertown WI, Watertown WI, Whitewater WI, and Williams Bay WI. A good heating and air conditioning repair or service company near you. To set-up a repair service estimate or replacement estimate, call (608) 868-6412. 24HR Home Comfort Services services all furnace, AC, humidifier, filter, thermostat and water heater brands including Carrier, Bryant, Payne, Trane, Lennox, Rheem, Ruud, Amana, Crown, Frigidaire, Gibson, Goodman, Lochinvar, Maytag, Weil McLain, A O Smith, Kohler, American Standard, GeoExcel, General, Aprilaire, Honeywell, White Rodgers, Dynamic and Skuttle.
Gerardo was very professional and kept us informed of what he was doing and what was needed. Our house is now the warmest it has been since we purchased it 3 years ago! And all of this was done on a Saturday morning with below freezing temps! We are very thankful and will be using Gerardo of True Comfort again when have the money to replace the furnace altogether.
Ashworth Heating & Cooling provides an affordable and reliable source of heating, cooling, air quality, and refrigeration services.  Specializing in installation, equipment updates, and maintenance repair, for both residential and commercial application, we ensure cost-effective solutions to every type of challenge.  Our goal is to simplify your life, minimize disruption, and optimize the performance of your essential systems.  When you contact Ashworth Heating & Cooling, we make it convenient to get the information, recommendations, and assistance you need, and deliver rewarding results in Hurricane, Huntington, Charleston, South Charleston, St. Albans, Dunbar & Milton, WV and all of the Tri-Country Area.
As your trusted furnace maintenance company, we offer local service no matter where you live. We’ll have one of our professionally trained and certified technicians out to your home within two hours of your call. Best of all, it doesn’t matter whether you purchased your furnace with us or not—no matter the make or model of your heater, we can provide the furnace maintenance it needs.  Check out some of the other great benefits of doing business with us:
Welzig Heating & Air is on call, 24 hours a day, 365 days, making sure that the skilled assistance you need is always available.   There’s no need to struggle with decreased performance from your air conditioner.   Even small aggravations, such as elevated sound levels, strange smells, or longer running times, are warning signs of larger issues and usually add up to higher running costs.   When you trust your cooling equipment to Welzig Heating & Air, we work to not only resolve pressing issues. but ensure reliability, efficiency, and longevity.   A thorough inspection often protects against degraded air quality, property damage, and premature system failure.   We work on all makes and models of air conditioners, and with every repair we tackle, our team of dedicated technicians earn your satisfaction.   Through exemplary customer service, ethical business practices, and exacting standards, Welzig Heating & Air provides superior solutions to homeowners across Boulder, Longmont, Louisville, Lafayette, CO & more.

I was able to get an appointment easily and they arrived promptly.  They detected the problem and repaired it quickly.  A few days later, I encountered another problem and again, I was able to get an appointment easily and they arrived promptly.  They recommended some easy fixes and now everything is working well again.  I can recommend them without qualification.  The guys that came out to my house were great.

The flame sensor safeguards your furnace against the unsafe burning of fuel, and a dirty flame sensor may cause your furnace to function improperly. Typically, the flame sensor comes in the form of a rod that can be found near the back of the furnace, right in the path of the burner. To clean the sensor, turn off power to the furnace at the breaker box. Then, if possible, remove the sensor from the furnace. Scrub the sensor gently to remove dust and other residues. Finally, reattach the sensor and resume power to the furnace.
If you’re looking for a professional heating company in Denver with the proper experience to handle your project, our crew has many years of training and experience on most major heating systems available in the Denver area. Our heating company in Denver understands that in some situations, the scope of the damage may put the units beyond repair. In this instance, we can offer you help finding the right energy efficient model that will provide you warmth and savings in your wallet. Heating in Denver can be expensive during the coldest time of year, so choosing the right heating system can give the same amount of heat while at the same time providing big savings when our Denver heater repair technicians help you pick the right system for your home.
Gerardo was very professional and kept us informed of what he was doing and what was needed. Our house is now the warmest it has been since we purchased it 3 years ago! And all of this was done on a Saturday morning with below freezing temps! We are very thankful and will be using Gerardo of True Comfort again when have the money to replace the furnace altogether.
Don has earned a lifetime customer! My wife and I moved into our fixer-upper house this summer and just when the weather turned we realized that the 8 year old Goodman furnace in our basement had rusted heat exchange pipes and was leaking carbon monoxide. (So much for the $400 I paid to an home inspector before we moved in...) Fortunately, the furnace had a warranty still active. Not so fortunately, Goodman was incompetent in getting us the replacement part. It took them a month to send it, and then it wasn't even the right part. Don went to bat for us and convinced Goodman to foot the bill for an entirely new furnace! He and another worker made time in their busy schedule during thanksgiving week to come out and get the unit installed. This is above and beyond service and I couldn't be happier.
Rheem manufactures and markets gas central furnaces that are available in single and multistage configurations, with some models capable of an AFUE rating of more than 90 percent. Some units meet Energy Star requirements. The average price of a Rheem central gas furnace is about $2,300 and Rheems are sold through their dealer network. Rheem products are made by the same manufacturer as Ruud.
Geothermal Heating and Cooling systems are unmatched in every way. This green alternative to temperature control is three times more efficient than conventional systems. Recognized by the US Environmental Protection Agency as the most environmentally-friendly option available today, installation of a geothermal HVAC system translates into a 50% reduction in heating costs, 30% reduction in cooling costs, and a 65% potential savings on hot water costs.  Sky Heating & Air Conditioning is now the largest WaterFurnace geothermal contractor west of Iowa. Our team of experienced professionals offer conscientious and skilled start-to-finish installation and service.  We specialize in outstanding geothermal HVAC systems, adding value and enjoyment to your home through sustainable solutions to year round temperature control. Contact Sky Heating & Air Conditioning for geothermal heat pump installation in Portland.

When you work with Bob’s, we make sure your furnace is properly sized and installed for optimal performance. When it comes to furnace installation in Renton, WA, Bob’s is dedicated to excellence, which defines our service. We know that professional furnace installation is the best way to protect its performance quality. Call today for more details.
When you work with Bob’s, we make sure your furnace is properly sized and installed for optimal performance. When it comes to furnace installation in Renton, WA, Bob’s is dedicated to excellence, which defines our service. We know that professional furnace installation is the best way to protect its performance quality. Call today for more details.
Air Quality Services, Inc., is a MN HVAC, Heating, Cooling, Air Conditioning, Geothermal Heat Pump, Ductless Mini-Split and Furnace repair, service, replacement and maintenance Company. Air Quality Services, Inc. employs only the best technicians for air conditioner repairs and, furnace repairs as well as all air conditioner replacements, furnace replacements and boiler replacements in Lakeville MN, Hopkins MN, Burnsville MN, Maple Grove MN, Champlin MN, Chanhassen MN, Chaska MN, Crystal Bay MN, Edina MN, Excelsior MN, Eden Prairie MN, Minnetonka MN, Long Lake MN, Minnetonka Beach MN, Mound MN, Plymouth MN, Prior Lake MN, Saint Bonifacius MN, Savage MN, Shakopee MN, Spring Park MN, Victoria MN, Waconia MN, Wayzata MN, Navarre MN, Bloomington MN, Richfield MN, St. Louis Park MN, Shorewood MN, Golden Valley MN. To set-up a repair service estimate or replacement estimate, call (952) 928-3838. So when you ask to find "A good heating and air conditioning repair service company near me," you've come to the right place. Air Quality Services, Inc. services all furnace, AC, humidifier, filter, Whole House Dehumidifiers, thermostat and water heater brands including Carrier, Bryant, Payne, Trane, Lennox, Rheem, Ruud, Amana, Daikin, Mitsubishi, Fujitsu, Crown, Frigidaire, Gibson, Goodman, Lochinvar, Maytag, Weil McLain, A O Smith, Kohler, American Standard, GeoExcel, General, Aprilaire, Honeywell, White Rodgers, Dynamic, York and Skuttle.
The heating installation process must be completed by a professional heating technician. There is simply no other way to make sure that your furnace is correctly integrated into the home. We take care of every detail, from the gas piping for the furnace to the ducts placed behind walls and in ceilings. Give us a call today to find out more about our Federal Way heating installation service.
Among the leading ways to prevent a breakdown and make sure it runs like a lean machine is with yearly scheduled tune-ups on your furnace. Just like any mechanical equipment, the useful life of a furnace will be enhanced with preventive maintenance, by ensuring that all the elements of the unit are running efficiently. In addition, regular cleanings can help pinpoint concerns before they become big problems and you end up paying emergency rates on a cold winter night. Plus, because furnaces burn fuel to make it hot, it’s important to inspect all the various pieces to ensure there aren’t any ruptures or leaks that could impact the safety of your family. Taking the time to schedule a tune-up, even when it’s not making that odd rattling noise you’ve been ignoring, will save you time, stress, and money throughout the heating season.
For almost 30 years, Horizon Services has been providing top-quality heating services for homeowners throughout Delaware, Southern New Jersey, Southeastern Pennsylvania, and Northeastern Maryland. Whether you need furnace repair, heat pump replacement, new system installation, or comprehensive maintenance for your home's heating system, you can rely on our skilled team to get the job done quickly and efficiently. Our technicians undergo some of the most rigorous technical training in the industry, including 150 mandatory hours of technical and customer service training every year, in order to equip them with the skills, tools, and experience to handle any heating need you may have. No matter the issue you're currently dealing with, we can quickly and correctly diagnose the source of the problem and get right to work resolving the matter at hand.
As a Carrier Factory Authorized Dealer, Ashworth Heating & Cooling is qualified in the most sophisticated and effective options in heating, cooling, and air quality.  We adhere to strict installation and maintenance procedures, and extend our standards of excellence into every facet of our services.  Established in 1995, our dedication to your satisfaction upholds a complaint free A+ rating from the Better Business Bureau.
Are you having trouble staying comfortable in your home? Tin Man Heating & Cooling Inc. is here to make sure you have the properly working HVAC system. In fact, we are very proud to go above and beyond in the services we provide to our customers and that has helped us earn an A+ ratting with the Better Business Bureau. Our team of skilled technicians can provide you with the right repairs and tune ups for all makes and models. We are proud to have become one of the leaders in geothermal installation in the region over the last decade.
The price of a furnace generally rises in step with its fuel efficiency. A furnace with a 90 percent AFUE might cost $1,000 more than a similar size unit with an 80 percent AFUE. But you can often recoup that additional cost through lower fuel bills over the life of the furnace, especially in regions such as the Northeast and Midwest, where winters can be harsh. How quickly you recover the investment depends on more than just AFUE. The electricity to run furnaces with different AFUEs can vary significantly. The climate where you live, how well your home is insulated, and your local gas and electricity rates also affect payback times.
When you hire Steel T Heating & Air Conditioning, know that you’re hiring a business that is fully licensed and insured with certified technicians that receive ongoing training. In order to earn the status of a Carrier Factory Authorized Dealer, our company is held to strict standards for customer satisfaction, product knowledge, technical expertise, and business practices. For five years in a row, we were honored to be selected as a Carrier President’s Award winner. This award identifies Steel T Heating & Air Conditioning as an example of excellence for dealers across the nation to follow. We’re also the only heating and cooling company in the state of Colorado to be inducted into the Carrier Hall of Fame, a distinction that only 25 other dealers in the country can claim. We are extremely proud of the superior service and quality products we offer to homeowners in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO. We never rest on past achievements, but continue to find new ways of earning your business.

Through our relationship with Wells Fargo Financial National Bank, Edwards Heating & Air offers a variety of rewarding options for financing your new Carrier product or system with approved credit.  We facilitate your investment in quality solutions to home comfort without straining your monthly budget.  With convenient monthly payments, competitive interest rates, flexible financing terms, and online account management, you can answer an unexpected need, enjoy superior equipment, and take advantage of innovative features that best suit your home and lifestyle.  Carrier financing allows you to save existing funding sources, like a home equity line of credit, credit card or bank account, for other needs or emergencies.  To learn more about financing options, or to hear about special financing promotions, contact Edwards Heating & Air and speak to an informed and helpful member of our team.
The flame sensor safeguards your furnace against the unsafe burning of fuel, and a dirty flame sensor may cause your furnace to function improperly. Typically, the flame sensor comes in the form of a rod that can be found near the back of the furnace, right in the path of the burner. To clean the sensor, turn off power to the furnace at the breaker box. Then, if possible, remove the sensor from the furnace. Scrub the sensor gently to remove dust and other residues. Finally, reattach the sensor and resume power to the furnace.
You can usually slip the belt on the motor’s (smaller) pulley first and then start it on the blower pulley. Rotate the blower pulley by hand, holding the belt in place but keeping your fingers from getting caught between the belt and the pulley. The belt should slip right into place. If it seems to be too tight or difficult to set in place, it may be necessary to adjust the motor mount to provide more slack.
×