As your trusted furnace maintenance company, we offer local service no matter where you live. We’ll have one of our professionally trained and certified technicians out to your home within two hours of your call. Best of all, it doesn’t matter whether you purchased your furnace with us or not—no matter the make or model of your heater, we can provide the furnace maintenance it needs.  Check out some of the other great benefits of doing business with us:
Trained to quickly and accurately make the diagnosis, our expert troubleshooters possess both the skills and speed that you need. Responding swiftly to your call, one of our technicians will provide you with a handwritten, fair and competitive estimate that details how exactly your system will be repaired. Offering a one-year parts and labor warranty, we restore your heat—and minimize your financial stress.
I really appreciated the great same-day service provided by Chris H, Swan Plumbing & Heating's technician today. I made an appointment to get an estimate on the water heater replacement, and expected to make another appointment for the installation. But Chris came prepared with all the equipment needed, and replaced our leaking water heater in a very efficient manner within about 2 hours.
It doesn’t matter if you need a replacement water heater installed or if you just want to schedule routine water heater maintenance; our staff will get the job done right. You rely on your water heater far too much to take any chances with the quality of its performance. When it comes to water heaters in Seattle, WA, our technicians are second to none.
Heat pumps that wring heat from outdoor air (and reverse the process in summer to act as an air conditioner) are inexpensive to install as an alternative to a cooling-only air-conditioning system. That makes them the preferred way to heat in the South and Southwest, where winters are typically short and mild. Heat pumps that wring heat from the ground are much more expensive to install, but they are suitable for cold climates because they can maintain their operating efficiency. Other inexpensive electric-heat options include strip heaters, which are installed in the ductwork of central air conditioning, and permanently installed baseboard units in each room. But before you consider any type of electric central heating in colder regions, keep in mind that electricity rates are much higher than those for natural gas and are likely to remain that way for the foreseeable future. You can get rate information for various fuels from local utilities and suppliers.
With more than 100 years in existence, Lennox has always delivered industry-leading innovation and technology while preserving stringent durability and reliability standards. The professionals at James Heating & A/C, Inc help bring those standards to Lexington so that you can always have total home comfort. If you’re in the market for a new HVAC system or even if you just have a question about what we offer, give us a call at 336-853-6070. We’d love to hear from you. 

Environmental Protection Agency (EPA) has selected Sears Home Services as a 2018 ENERGY STAR Partner of the Year winner for Sustained Excellence — Retailer and Energy Management. This award is reserved for ENERGY STAR partners demonstrating outstanding leadership and exceptional commitment to the environment by providing consumers with products, services and information that help individuals make sustainable purchasing decisions.


Don has earned a lifetime customer! My wife and I moved into our fixer-upper house this summer and just when the weather turned we realized that the 8 year old Goodman furnace in our basement had rusted heat exchange pipes and was leaking carbon monoxide. (So much for the $400 I paid to an home inspector before we moved in...) Fortunately, the furnace had a warranty still active. Not so fortunately, Goodman was incompetent in getting us the replacement part. It took them a month to send it, and then it wasn't even the right part. Don went to bat for us and convinced Goodman to foot the bill for an entirely new furnace! He and another worker made time in their busy schedule during thanksgiving week to come out and get the unit installed. This is above and beyond service and I couldn't be happier.

Start with your utility company; they can help a great deal. Comparing previous bills isn't always a good measure, as the weather is never exactly the same month to month. Instead, if you take your energy bill and divide it by the square footage of livable space in your home, don't count areas like unfinished garages or basements -- you can calculate how much you are spending to heat or cool each square foot of your home. Your energy provider can tell you what the average cost per square foot is in your region for that same period of time so you can compare apples to apples.
An annual inspection of your unit can ensure that the various potential problems mentioned above are detected early, and before they require complete replacement. During this inspection, for instance, a professional might find small cracks in your heat exchanger or a faulty seal in your blower motor. Some manufacturer's warranties even require these annual inspections to maintain validity. Typically, your furnace inspection will cost between $80 and $150 depending on the area in which you live and the professional you work with.
On average, furnace repair costs $287 nationally, with some homeowners spending as little as $60 while others paying $900 for furnace maintenance. Repairs to an electric furnace can run you $300 or less, while gas furnace repairs can be more complex and range from $375 to $1,200, depending on the what needs service. Most homeowners spend between $131 and $453 to fix their furnace. Here is what you need to know, along with the various factors that could affect the price of your furnace repair.
Entry door replacement & installation home improvement Top-Loading Washer Troubleshooting Tips When Is the Best Time to Buy New Appliances? How Long Do Appliances Usually Last? Ice Maker Troubleshooting Problems and Solutions 5 Most Common Dryer Problems and Solutions Portage, MI appliance repair Murfreesboro appliance repair St Augustine appliance repair Appliance repair Panama City Carrollton appliance repair Athens appliance repair Oviedo appliance repair 2800 N Germantown Prkway appliance repairs Wichita appliance repair Appliance repair Melbourne Appliance repair Victoria Appliance repair in Stroudsburg, PA 650 Bald Hill Rd appliance repairs 3065 Route 50 appliance repairs
At Steel T Heating & Air Conditioning, we know how frustrating it can be when you have to invest large amounts of money in your HVAC systems. We always have your best interests in mind, so we provide flexible financing options, with approved credit, from Wells Fargo Financial National Bank. You’ll enjoy benefits such as convenient monthly payments, special financing terms, and easy online account management. Apply today or give us a call for more information!
Attic Fan Installation Bathroom Fan Repair Ceiling Fan Installation Ceiling Fan Repair Electric Wall Heater Installation Electrical Panel Installation Electrical Panel Repair Electrical Panel Upgrade Electrical Wiring Installation Electrical Wiring Upgrade Exhaust Fan Installation Holiday Lighting Installation LED Interior Light Conversion Light Fixture Installation Light Fixture Repair Light Fixture Replacement Light Switch Installation Outlet Installation Outlet Repair Spa Wiring Installation
Furnace replacement in Denver is necessary if your furnace is broken beyond repair or if it is more than 15 years old. Old furnaces are very inefficient (they use more power and gas than newer ones) and they can even be very hazardous to your health and home. Furnaces are controlled fires, and when the control systems for said fires are out of date or malfunctioning, the safety and wellbeing of your home are in jeopardy. So if you have an old or malfunctioning heater, then give our furnace replacement company a call today.
To keep your furnace in good working order it’s important to have it regularly cleaned. The national average furnace cleaning cost ranges from $60 to $80, though prices can vary greatly based on where you live in the country and what your furnace maintenance includes. An HVAC company may have different rates for different levels of furnace maintenance. For example,one company may offer general furnace maintenance for $79 and advanced maintenance for $138. Another company may offer a 38-point maintenance check for $89 and a 64-point maintenance check for $178. According to Energy.gov, a standard furnace cleaning and maintenance visit can include:
Professionally installed air filtration systems in Federal Way, WA are the best way to ensure that your home has excellent indoor air quality. Let us help you breathe better air in your home. We offer a number of different air filtration systems from leading manufacturers in the industry, and we’d be happy to help you find one that meets your needs.
Even if your air conditioning unit is still working, depending on the type of system in your home today, you could recoup your investment in a new system in as little as three years. However, that doesn't mean that your system needs to be replaced. Furnaces, air conditioners, and other heating and cooling systems have made tremendous gains in efficiency over the past five years, so if you have an older unit, it is worth taking a look at whether or not a repair is the best investment.
This feature uses a number of thermostats, a sophisticated central controller, and a series of dampers that control airflow to deliver different amounts of heating or cooling to different parts of the home. The larger the home, as a rule, the more useful zoning is. That's especially true if sections of the home have different heating or cooling requirements, because of wide variations in the number or type of windows, for example. But contractors we interviewed said that furnaces connected to zoned ductwork generally require more repair.
I had a minor crisis at my home with a backed up sewer drain in the basement and me just home from a freak accident where I broke both arms! Spencer narrowed down the problem and called his coworker who had the equipment to snake my drain and stayed to clean up until the issue was resolved. He was courteous and careful to make sure my carpet didn't get marked up and cleaned up well. I am so grateful for him being willing to go the extra mile to help me out!
We can make certain that the root of the problem is eliminated because we know important it is to have a good air conditioner in your home, especially when the heat begins to rise. Our Federal Way air conditioning repair specialists service all system types and brands, and no issue is too major or minor for our team. We can restore the functionality and efficiency of your system.
American Standard manufactures and markets central furnaces that are available in single and multistage configurations, with some models capable of an AFUE rating of more than 90 percent. American Standard markets units that meet Energy Star requirements and makes others that it claims offer quiet operation. The average price of an American Standard central gas furnace is about $3,000 and American Standards are sold through their dealer network.
Gas is currently the most common heating fuel and most new central-heating systems use gas. How efficiently a furnace converts gas into heating energy is reflected in its annual fuel-utilization-efficiency (AFUE) rating, which is measured as a percentage. The higher the number, the more heat the furnace can wring from each therm of gas. Since efficient furnaces generate fewer emissions, environmental considerations might also influence your decision.

Start with your utility company; they can help a great deal. Comparing previous bills isn't always a good measure, as the weather is never exactly the same month to month. Instead, if you take your energy bill and divide it by the square footage of livable space in your home, don't count areas like unfinished garages or basements -- you can calculate how much you are spending to heat or cool each square foot of your home. Your energy provider can tell you what the average cost per square foot is in your region for that same period of time so you can compare apples to apples.
You can usually slip the belt on the motor’s (smaller) pulley first and then start it on the blower pulley. Rotate the blower pulley by hand, holding the belt in place but keeping your fingers from getting caught between the belt and the pulley. The belt should slip right into place. If it seems to be too tight or difficult to set in place, it may be necessary to adjust the motor mount to provide more slack.
Air Quality Services (AQS) provides you with professional and attentive home heating and cooling services to make sure that your systems do not fail you when you need them the most. We help clients within the Twin Cities area with our expert installation, tune-up, and repair services. Our clients in Bloomington, Edina, Chanhassen, Eden Prairie, Minnetonka, St. Louis Park, Excelsior, and other nearby areas can always count on our prompt heating and cooling expertise.
• If your furnace is inside the house, it may be located in an area that is magnifying the sound it makes – such as under a staircase. Often moving the furnace to another part of the house can reduce that noise. You may find that it’s in an area that was previously occupied by another older type of furnace, and you never heard those sounds from that one. Please keep in mind that modern furnaces are built differently – with multiple speeds and stages – which may create different sounds and require more airflow than your old ductwork has available. If the furnace doesn’t get enough air, it gets cranky.

• Furnace is making more noise because it’s turning on and off more frequently. It may need repair, may not have been sized properly to fit the needs of your house, or may not have the airflow available that it needs from the ducts. The ducts are most often the culprit. Sometimes adding a cold air return can solve this. Ensure your vents are all open. If you are closing off vents in your house this can contribute to the issue.

As the largest heating company in the Northwest, Washington Energy Services has fixed thousands of heating systems. We service most major brands of heating equipment, including York, Bryant, Carrier, Lennox, Coleman and Rheem. Our NATE certified, factory trained service technicians are standing by for furnace service, and also heat pump and air conditioning repair. Home owners from Sea-Tac to Lynnwood trust Washington Energy Services for furnace service and repair. Schedule your service today!
When your heating and cooling system stops working, you need the help of a reliable, experienced, local service professional that can diagnose the problem and repair your air conditioner or furnace at a fair price. You can count on The Home Depot's licensed and insured heating and cooling professionals for all your heaters, air conditioning units, and any ventilation needs.
If your home is not heated using forced air, chances are a boiler will make sure you stay warm during cold nights. A hot water system delivers hot water through a network of pipes that run to every room in your house. The heating effect gets maximized through radiators. The most common issues with hot water heating tend to be not be major, but small problems that add up over time. Mineral deposits within the water tank, a pilot light malfunction, or an issue with a radiator itself can require professional repair. On average, you will pay between $183 and $582 for these problems. The exact amount will depend on the exact problem, as described in our boiler repair cost guide.
Whether you’re satisfied with your water heater’s performance or not, you would do well to take advantage of our professional water heater services in Federal Way, WA. Water heaters are sturdy and reliable when professionally installed and serviced, but there may come a time when you need to call on the Federal Way water heater experts at Bob’s Heating & Air Conditioning for water heater repairs.
Summers in Portland and The Dalles can be the absolute best time of year or pure torture.  Your cooling system makes the difference. Take advantage of perfectly maintained temperatures, superior dehumidification, unprecedented energy efficiency, and outstanding reliability with quality air conditioning products and services from Sky Heating & Air Conditioning.  We protect the enjoyment of your home with precise installation, system replacement, seasonal maintenance, and prompt repair.  Our skilled AC technicians are always on call 24 hours a day, 7 days a week, providing Emergency Service and protecting the value of your investment.  Every project is answered with a dedication to customer satisfaction that has earned us an A+ rating from the Better Business Bureau. Contact Sky Heating & Air Conditioning for air conditioning service in The Dalles and Portland, OR.  

We’re located in Lexington and service the surrounding area, so stop on by if you’re looking for a new furnace or want to set up an appointment to have one of our techs do a consultation at your home and help you figure out which system is ideal for your home. Schedule furnace repair or a furnace service appointment with James Heating & A/C, Inc using our online scheduler, or if you need help more quickly, give us a buzz at 336-853-6070. 
We offer a wide range of air conditioning services in Federal Way, WA, from the installation of new systems from scratch to the replacement of old models that have seen better days. We can also make sure that your air conditioner is routinely cleaned and inspected with our routine maintenance. As always, our air conditioning technicians are available to repair your AC at a moment’s notice. Call us today for professional air conditioning service.
When you change the temperature on your thermostat, or the temperature in your home drops, a signal lets the furnace's igniter know that it's time to turn on. Igniters exist in both hot water boilers and forced air furnaces, replacing pilot lights as the switch your unit needs to kick on. Naturally, this is a core part in making sure it works reliably. When it stops working, your unit will not longer know when to actually heat your home. Fortunately, furnace igniter repair doesn't tend to be a major budget problem, and costs less than $300 on average.
Are you in the market for a new furnace? Do you find it difficult to narrow down your options? We offer professional heating installation in Federal Way, WA that can outfit your home with a heating system in no time. Our Federal Way heating installation technicians are skilled at helping each customer select a furnace that not only works for their budget, but also for their living space.

On average, furnace repair costs $287 nationally, with some homeowners spending as little as $60 while others paying $900 for furnace maintenance. Repairs to an electric furnace can run you $300 or less, while gas furnace repairs can be more complex and range from $375 to $1,200, depending on the what needs service. Most homeowners spend between $131 and $453 to fix their furnace. Here is what you need to know, along with the various factors that could affect the price of your furnace repair.
As a Carrier Factory Authorized Dealer, M and M, Heating & Cooling, Plumbing & Electrical is qualified to properly size and install the most technologically advanced and well-regarded heating, cooling, and air quality products on the market today. Our team is NATE-certified, factory trained, EPA certified, and regularly updated, ensuring the right solution to any challenge.
Air Quality Services (AQS) provides you with professional and attentive home heating and cooling services to make sure that your systems do not fail you when you need them the most. We help clients within the Twin Cities area with our expert installation, tune-up, and repair services. Our clients in Bloomington, Edina, Chanhassen, Eden Prairie, Minnetonka, St. Louis Park, Excelsior, and other nearby areas can always count on our prompt heating and cooling expertise.
We are so happy we selected Clarence with CAL Property Care to repair our furnace. He was very easy to schedule an appointment with and actually came out on a Saturday to figure out what the issue was. Clarence had to order a part to complete the repair, but he promptly updated us with the progress every step of the way. Clarence really went above and beyond and I can't say enough for his friendly attitude and quality of work! Thanks again Clarence!
But even if your system is not yet at its breaking point, there are other reasons to consider professional air conditioning replacement service in Federal Way, WA. For example, if you find that your AC is highly inefficient because of its age or damage, then it may make more financial sense to invest in a new system so that you can take advantage of today’s energy efficient technology.

You may think that a great air conditioner is guaranteed to provide you with a great performance. But in order to get the most from your new air conditioner,  you’ll want to schedule air conditioning installation in Renton, WA with a Bob’s professional AC technician so that you’re certain the work is done correctly. That is as easy as giving us a call.


©2018 By Horizon Services, LLC. All Rights Reserved. DE License # PL0000726, HL0000299. Contractor Reg. # PA017876, PA057742. NJ Plumbing Lic. # PL36BI01232300 - David Geiger HIC reg. # 13VH05117300, NJ Master HVACR contractor Lic. # 19HC00193700. MD Master HVACR contractor Lic. # 47186, MD Master Plumber/Gas Fitter Lic. # 63739 – David Geiger. EL.LIC./B.P. #34EI01207700.
Rheem manufactures and markets gas central furnaces that are available in single and multistage configurations, with some models capable of an AFUE rating of more than 90 percent. Some units meet Energy Star requirements. The average price of a Rheem central gas furnace is about $2,300 and Rheems are sold through their dealer network. Rheem products are made by the same manufacturer as Ruud.
I'd had them come out before and called because my thermostat wasn't getting power. They said they don't service townhomes. I said that must be a new policy because they've been out before and she said they've had it for awhile. I tried to ask why they don't service townhomes and she said they don't service attached homes or commercial properties. I said that my home isn't commercial and it doesn't really answer my question, but I guess I'll go elsewhere. I couldn't find this policy on their website and I can't really understand why a townhome furnace would be different than an unattached home. When they came out before I seem to remember they did a good job, so it's too bad they have odd policies now.

If you suspect that your furnace is no longer working as it should, then don’t keep that information to yourself. At Bob’s Heating & Air Conditioning, our heating repair specialists take pride in our ability to solve problems, and that includes comprehensive heating repair service in Federal Way, WA. If there is a problem with your furnace, we can provide a solution fast.
The thermocouple is a copper rod that the pilot flame heats-up. When it gets hot enough, the thermocouple signals that there is enough heat to burn the gas fuel being released into the appliance—and so it allows the gas to be released to the burners. In some cases where the pilot light won’t stay lit, the thermocouple needs to be adjusted or replaced. This is generally a job for a professional.
×