As a Carrier Factory Authorized Dealer, M and M, Heating & Cooling, Plumbing & Electrical is qualified to properly size and install the most technologically advanced and well-regarded heating, cooling, and air quality products on the market today. Our team is NATE-certified, factory trained, EPA certified, and regularly updated, ensuring the right solution to any challenge.
If your furnace’s motor runs but the blower doesn’t move air, the belt that connects the two probably has broken. Replacing it is an easy fix. First, turn off all power to the unit and turn off the gas at the gas valve that serves the furnace. Remove the door on the front of the furnace cabinet to give you access to the blower (it might be on a slide-out drawer.) Check the number stamped on the belt and get an exact replacement from a home center or heating supply outlet.

Customer has a 3 year old American Standard gas furnace, she said that her furnace and thermostat were fried and not working. She had an electrician come by and inspect it, but he wasn't able to do anything. Upon investigation, I found that the thermostat has failed due to a power surge that hit the home. I also found that the fuse on the control board was blown and the contactor at the condenser was fried along with wiring. I replaced thermostat, contactor, and fuse/wiring and tested all modes of operation. All components are within manufacturers specifications and system fully operational. Recommend annual maintenance and power surge protector for either home or equipment.
You cannot afford to gamble with your comfort. If your air conditioner is not expertly installed, routinely maintained and professionally repaired, you are really putting your comfort at risk. Our Seattle, WA air conditioning experts have the experience and training they need to ensure that your air conditioner is ready for action when temperatures rise.

There is no denying the popularity of furnaces as a heating system option. There is a reason that gas furnaces are so ubiquitous. In fact, there are several. Natural gas furnaces in Seattle, WA are prevalent because they are efficient, reliable, and effective. Schedule your gas furnace installation, repair and maintenance with a member of our team.
Air filtration systems work by trapping contaminant particles on a medium such as fiberglass. While your forced–air system already has one or more air filters, those are designed to protect the system components from particles, rather than remove them from your indoor air. We not only install air filtration systems in Federal Way; we also repair and maintain them as necessary.

Steel T Heating & Air Conditioning is uniquely qualified to recommend and install the industry’s most recognized heating and cooling systems, from central air conditioners and furnaces, to heat pumps, ductless units, and air quality accessories. We offer a range of innovative products to improve the health, comfort, and convenience of your everyday life. Plus, we’ll stand with you throughout the entire product life, offering skilled installation and replacement, seasonal maintenance, and 24 hour repair to maximize the return on your investment. Targeting cost-savings, energy efficiency, reliability, and safety, Steel T Heating & Air Conditioning is your single solution for temperature control. Contact us to day for heating and air conditioning services in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO.
As a Factory Authorized Dealer, Air Blue Heating and Cooling Inc. adheres to recommended service procedures, and if replacement parts are necessary, we rely on genuine factory authorized parts to restore original sound levels, efficiency ratings, and durability.  With over thirty years of industry experience, we’ve seen the consequences of neglected upkeep and the rewards of timely inspection from our skilled technicians.  Through seasonal cleaning, adjustment, and troubleshooting, we optimize all components, combat wear and tear, and head off potential difficulties.  The result is far fewer repair needs, lengthened service life, lower sound levels, superior air quality, safe operation, minimized operational costs, enhanced heating capacity, and greater value from your investment.  We also fulfill warranty requirements.  There are no drawbacks.

Sky Heating & Air Conditioning provides a wide range of quality HVAC services to homeowners across Portland and The Dalles.  By bringing together skilled technicians and premier products, we deliver superior value for your investment.  We utilize tried and true strategies to enhance efficiency, comfort, and convenience throughout your home.  For heating and air conditioning installation, repair, and regular maintenance, no one takes better care of you than Sky Heating & Air Conditioning.  And we’re always here!  Count on us 24 hours a day, 7 days a week, to protect your safety, comfort, and best interests.
As a family business owned and operated by the Young family, we have been providing quality air conditioning repair and heating service since 1992. Allow us to show you why we deliver “peace of mind” by virtue of everything we do to make your home environment as comfortable and healthy as it can possibly be. If you need service in the Eastern Panhandle, WV area, we’re here to help! Call today!
Thank you Caleb Elliott for servicing our water heater. We are ready for winter! Caleb was very personable and did a thorough job servicing our water heater. We appreciate Reliable's commitment to service and keeping things running for us. Every service person we've had has been top notch. So glad we chose Reliable to take care of us. Continue reading...
You can usually slip the belt on the motor’s (smaller) pulley first and then start it on the blower pulley. Rotate the blower pulley by hand, holding the belt in place but keeping your fingers from getting caught between the belt and the pulley. The belt should slip right into place. If it seems to be too tight or difficult to set in place, it may be necessary to adjust the motor mount to provide more slack.

Natural gas furnaces operate similarly to the above, using a pilot light to ignite the burners and heat up the air. Also similar to propane gas, your average repair costs for a natural gas furnace will range anywhere from $125 for small repairs to $1,200 if you have to replace the entire heat exchanger. The difference between both options is not necessarily the actual furnace, but the type of gas used to burn through it and heat your home. As a result, the repair costs tend to be close to identical.

Heat exchangers are the components that draw heat from the burned gas. To draw more heat from the air they burn, energy-efficient furnaces supplement the primary exchanger with a second exchanger. Because the exhaust gases in that second exchanger might yield a corrosive acidic condensate, the second exchanger is made of stainless steel, lined with plastic, or otherwise protected.
Over the past twenty years, we have used a number of different heating and cooling companies, none impressed us to use them more than once or twice. The service provided by A-TEMP was so outstanding; they will be our heating and cooling service provider for LIFE! Exceptional all around! It is nice to know why our home has three temperature zones and what we could do to improve it; plus the costs. Also, to understand the importance of regular maintenance-especially as it relates to carbon monoxide emissions. We appreciate the forewarning that our new system would be noisier due to the increased volume in our return system. We feel so blessed to know we do not have carbon monoxide emissions now and the furnace is the right size for our home. We feel like we won a million dollars with our new system!
When is water heater replacement necessary? If your system breaks down irreparably without any hope for repair, then it’s fairly obvious what needs to be done. But there are other reasons for considering water heater replacement in Federal Way, WA as well. For example, you may want to consider replacing your old model if it no longer works efficiently or effectively, even if it still runs.
A pinging or popping sound coming from the duct work can come from thermal expansion—the ductwork expanding and contracting as it heats and cools.  Or, air blowing past a loose flap of metal can make the sound. Track along the duct runs, listening for the sound. If you locate it, make a small dent in the sheet metal to provide a more rigid surface that’s less likely to move as it heats and cools.
If you own a forced–air distribution system, then you need to ensure that you take care of your ductwork. After all, your central AC or heat pump is only as effective and efficient as the cleanliness and integrity of the ducts that transport your conditioned air. With our air duct cleaning service in Federal Way, WA, your HVAC system is in good hands.
Yes. You should expect to pay a diagnostic fee to cover the cost of the technician's visit, the diagnosis of your air conditioner's problem, and a quote for the repair options. You will be advised of the issue along with recommended options to correct it, which may include a system replacement if your unit is old or significantly damaged. If you decide to replace the system, the diagnostic fee will be credited toward your replacement purchase.
Jeremi came out and serviced our air conditioner, checked our furnace, replaced our filter, set our thermostat and cleaned our alot of cottonwood out or our air conditioner on the side of our house. He was a great technician and did and great job. after he adjusted everything and cleaned out the vents in the air conditioner outside the house was cooler than it was. He is a nice man and very personable. Both my wife and I were very happy and satisfied with his work. the service was done on Thursday, July 21st, 2016
My furnace thermostat stopped working, and when I called Dehlia answered the phone and set up an appointment. They charged less for a diagnostic call than larger companies. They are actively licensed, bonded and insured. Verne arrived 2 days later, explained what was broken in my 17 year old furnace and gave me an estimate and time of replacement for a new furnace. Dehlia confirmed via email and phone, and Don and Zack showed up as promised on time a week later and replaced my Bryant 90i furnace with a new Rheem 96% efficient 2 stage Variable speed 85,000btu gas furnace Model #R96VA0852521 and provided me with the paperwork warranty and removed the old one. Cost was $5,394.90 including tax. I gave up on trying to get 2 more estimates because every furnace company wants $125 to $200 to come out to do a diagnostic and this company wanted $75 to come out to look at it although admittedly they just took a look at it and said it was broken and repair would be $2 to $3k and should just get a new  one (this fee was waived when I agreed to buy a new furnace from them). They also said it was possible I could find cheaper installation elsewhere, but I was freezing in December and I just wanted heat and other companies were 2 to 3 weeks out for an appointment.  They were pleasant to chat with as they worked and Don updated a convoluted furnace exhaust piping system. They accept cash and check after a job is finished with no deposit up front and are clear that 3% is added if you pay via credit card.  Overall I am happy with my new furnace although I sure wish I could've replaced it myself to save some money.
Customer called requesting standard maintenance on their gas furnace and their tankless water system. System is running well, all components are within manufacturers specifications. No issues other than thermostat which home owner is aware of. Recommend annual maintenance Tankless Maint - Unit has been flushed and inspected. All operations normal at this time.
Among the leading ways to prevent a breakdown and make sure it runs like a lean machine is with yearly scheduled tune-ups on your furnace. Just like any mechanical equipment, the useful life of a furnace will be enhanced with preventive maintenance, by ensuring that all the elements of the unit are running efficiently. In addition, regular cleanings can help pinpoint concerns before they become big problems and you end up paying emergency rates on a cold winter night. Plus, because furnaces burn fuel to make it hot, it’s important to inspect all the various pieces to ensure there aren’t any ruptures or leaks that could impact the safety of your family. Taking the time to schedule a tune-up, even when it’s not making that odd rattling noise you’ve been ignoring, will save you time, stress, and money throughout the heating season.

Air Quality Services, Inc., is a MN HVAC, Heating, Cooling, Air Conditioning, Geothermal Heat Pump, Ductless Mini-Split and Furnace repair, service, replacement and maintenance Company. Air Quality Services, Inc. employs only the best technicians for air conditioner repairs and, furnace repairs as well as all air conditioner replacements, furnace replacements and boiler replacements in Lakeville MN, Hopkins MN, Burnsville MN, Maple Grove MN, Champlin MN, Chanhassen MN, Chaska MN, Crystal Bay MN, Edina MN, Excelsior MN, Eden Prairie MN, Minnetonka MN, Long Lake MN, Minnetonka Beach MN, Mound MN, Plymouth MN, Prior Lake MN, Saint Bonifacius MN, Savage MN, Shakopee MN, Spring Park MN, Victoria MN, Waconia MN, Wayzata MN, Navarre MN, Bloomington MN, Richfield MN, St. Louis Park MN, Shorewood MN, Golden Valley MN. To set-up a repair service estimate or replacement estimate, call (952) 928-3838. So when you ask to find "A good heating and air conditioning repair service company near me," you've come to the right place. Air Quality Services, Inc. services all furnace, AC, humidifier, filter, Whole House Dehumidifiers, thermostat and water heater brands including Carrier, Bryant, Payne, Trane, Lennox, Rheem, Ruud, Amana, Daikin, Mitsubishi, Fujitsu, Crown, Frigidaire, Gibson, Goodman, Lochinvar, Maytag, Weil McLain, A O Smith, Kohler, American Standard, GeoExcel, General, Aprilaire, Honeywell, White Rodgers, Dynamic, York and Skuttle.
Tyler M came to my house today to clean the furnace fan and motor, and to check the furnace efficiency. He arrived on time, did a great job on the furnace. The fan was really dirty and did more work than was requested as a courtesy - and still charged the quoted price. Tyler was friendly, courteous, very knowledgeable, and was very efficient in completing the work. I would definitely recommend Tyler M and Swan plumbing and Heating for excellent work at a very reasonable price.
Edwards Heating & Air continues to look for new ways to improve service.  We hire only NATE-certified, extensively experienced, and dedicated professionals.  We offer a wide range of products, from ductless options to heat pumps, furnaces, air conditioners, and air quality systems, guaranteed to answer the most challenging comfort demands.  To maintain your equipment in peak condition, promoting year after year of uninterrupted performance, we offer preventative service plans that are affordable, convenient, and effective.  If you are ever confronted with a malfunction, the team from Edwards Heating & Air is always available, 24 hours a day, 7 days a week, to provide the skilled assistance you need. Through our relationship with Wells Fargo Financial National Bank, we offer flexible financing options with approved credit to facilitate your investment into superior quality heating and cooling.  Our ongoing dedication to your complete satisfaction is evidenced by our complaint-free, A+ rating by the Better Business Bureau.  At Edwards Heating & Air, we do things right, every time.

No one wants to be stuck in the dead of summer with a broken air conditioner, or in the cold of winter with a broken furnace or boiler. That’s why we’re available any time of day to make your emergency heating and air conditioning repair and get your system up and running as quickly as possible. We’ll show up on time, in uniform and ready to make your HVAC repair right the first time.
Great service, Brandon did a job great job explaining eveything he was doing and showed me all issues and concerns I may have had beyond my initial problem of a clogged drain that responded to. He also did a great job in resolving my repair needs and installation of needed parts to maintain our AC unit. I now have a AC person I trust and can rely on for the future for both repair and maintenance. Thank you Brandon and A team Mechanical for the prompt response and after hour service.
An undersized heating system will, obviously, struggle to heat your home effectively. What some homeowners fail to realize is that an oversized system is no better. If your system is too big for your home, it will short–cycle which can lead to increased wear and tear or damage to your system. Schedule your heating installation in Seattle, WA with us to get the quality heating performance you need.
The professionals here at Brothers Plumbing, Heating and Electric are well trained, experienced and seasoned experts. We have been the go-to plumbing, electrical and HVAC company in the area for over 35 years and we always come highly recommended by our many satisfied customers. We offer a 100% satisfaction guarantee, have an A+ Rating with the BBB, won the Thornton “People’s Choice Award” for 2016, drug test and background check all of our employees, email you a picture of the technician who will be providing the service before arrival and call once the service is complete to ensure 100% satisfaction. So what are you waiting for? With our competitive pricing, trained and experienced technicians, and well-rounded list of home services, we’re clearly the company to trust. Get in touch with us here at Brothers Plumbing, Heating and Electric to schedule your needed service today!
×