The only way to get the most from your water heater is by having it professional cleaned and inspected from time to time. During the course of its service life, your water heater endures a significant amount of wear and tear, and catching any problems early on in their development is one of the major advantages of professional water heater maintenance in Federal Way, WA.
The thermocouple is a copper rod that the pilot flame heats-up. When it gets hot enough, the thermocouple signals that there is enough heat to burn the gas fuel being released into the appliance—and so it allows the gas to be released to the burners. In some cases where the pilot light won’t stay lit, the thermocouple needs to be adjusted or replaced. This is generally a job for a professional.

Next check and clean the furnace’s flame sensor. The video below shows you how—note that this guy fixes it in about 5 minutes. We would probably use a little bit of emory paper, but he cleans the sensor with a 5-dollar bill. Another video further down the page under the discussion of “If your furnace keeps shutting off after about 5 minutes” shows the same project with a different brand of furnace.
Our new HVAC unit started to leak badly, so we set up an appointment for an on-site diagnosis. The two-man crew arrived in the agreed-upon window and was very experienced. They gave off the impression that they had seen just about everything before. They quickly found the source of the problem, fixed it, and explained in full what they were doing and why. They also offered up some helpful tips of what to look for and how to self-diagnose issues.
Welzig Heating & Air is on call, 24 hours a day, 365 days, making sure that the skilled assistance you need is always available.   There’s no need to struggle with decreased performance from your air conditioner.   Even small aggravations, such as elevated sound levels, strange smells, or longer running times, are warning signs of larger issues and usually add up to higher running costs.   When you trust your cooling equipment to Welzig Heating & Air, we work to not only resolve pressing issues. but ensure reliability, efficiency, and longevity.   A thorough inspection often protects against degraded air quality, property damage, and premature system failure.   We work on all makes and models of air conditioners, and with every repair we tackle, our team of dedicated technicians earn your satisfaction.   Through exemplary customer service, ethical business practices, and exacting standards, Welzig Heating & Air provides superior solutions to homeowners across Boulder, Longmont, Louisville, Lafayette, CO & more.
The cost to replace your entire unit is around $4,000. That expense can range from $2,500 to $5,900, depending on the type and brand of furnace you choose. Brands particularly have an impact on that price. A Goodman electric furnace, will only cost about $2,100 for the unit and labor. On the other hand, a Trane oil furnace may cost up to $9,000 all things considered. Our Furnace Installation Cost Guide can give you a better idea on both the general cost and the differences for brands like Amana, Bryant, Coleman, and others. The brand also plays into the repair cost for your furnace. Especially the prices of individual parts can change; a York heat exchanger, for example, can cost up to $1,900, while the same component from Heil will cost as little as $400.
Whether you have an electric or gas furnace, you shouldn’t have to suffer when your heater is not working. At Sears Home Services, our technicians fix many of the top furnace manufacturers. The issues you may face with your furnace can vary depending on the type of heating system. If you own an electric model and it isn’t working, some of the potential causes include:
When choosing a heating and cooling company, it's important that you find one that employs licensed, highly trained, background-checked, and drug-tested technicians. Considering this person will be in your home, it would be nice if the technician is also well-groomed, honest, polite, informative, and will give you options on how to improve your comfort.

Air Quality Services (AQS) provides you with professional and attentive home heating and cooling services to make sure that your systems do not fail you when you need them the most. We help clients within the Twin Cities area with our expert installation, tune-up, and repair services. Our clients in Bloomington, Edina, Chanhassen, Eden Prairie, Minnetonka, St. Louis Park, Excelsior, and other nearby areas can always count on our prompt heating and cooling expertise.


In Denver, Brothers Plumbing, Heating and Electric have been providing plumbing, heating, and electric services for over 30 years. The family owned and operated company was founded in 1980. The specially trained technicians continuously provide prompt, professional, quality services. We provide top of the line customer service and a guarantee on the work done. Your search for reliable furnace repair ends here.
Our new HVAC unit started to leak badly, so we set up an appointment for an on-site diagnosis. The two-man crew arrived in the agreed-upon window and was very experienced. They gave off the impression that they had seen just about everything before. They quickly found the source of the problem, fixed it, and explained in full what they were doing and why. They also offered up some helpful tips of what to look for and how to self-diagnose issues.
My furnace thermostat stopped working, and when I called Dehlia answered the phone and set up an appointment. They charged less for a diagnostic call than larger companies. They are actively licensed, bonded and insured. Verne arrived 2 days later, explained what was broken in my 17 year old furnace and gave me an estimate and time of replacement for a new furnace. Dehlia confirmed via email and phone, and Don and Zack showed up as promised on time a week later and replaced my Bryant 90i furnace with a new Rheem 96% efficient 2 stage Variable speed 85,000btu gas furnace Model #R96VA0852521 and provided me with the paperwork warranty and removed the old one. Cost was $5,394.90 including tax. I gave up on trying to get 2 more estimates because every furnace company wants $125 to $200 to come out to do a diagnostic and this company wanted $75 to come out to look at it although admittedly they just took a look at it and said it was broken and repair would be $2 to $3k and should just get a new  one (this fee was waived when I agreed to buy a new furnace from them). They also said it was possible I could find cheaper installation elsewhere, but I was freezing in December and I just wanted heat and other companies were 2 to 3 weeks out for an appointment.  They were pleasant to chat with as they worked and Don updated a convoluted furnace exhaust piping system. They accept cash and check after a job is finished with no deposit up front and are clear that 3% is added if you pay via credit card.  Overall I am happy with my new furnace although I sure wish I could've replaced it myself to save some money.
Service Experts Heating and Air Conditioning was founded on the basis of providing customers with the best heating and cooling practices in the industry. Since its inception, Service Experts has been dedicated to community, providing the top of the line HVAC products and services in your area. If you want more information about your local HVAC leaders, call us at 866-397-3787 or set up an appointment with us online.

The main purpose of your furnace filter is to ensure that none of the additional materials your fans pull back into the unit - such as hair and dust - actually damage the furnace or its parts. In the process, it also improves air quality in your home. Some annual inspections will include changing and cleaning this part of the unit. That said, you can also clean or change your furnace filteryourself. Costs for new filters range based on brand, but tend to be around $30.


Turn to Ashworth Heating & Cooling for the installation of a standby home generator, along with our HVAC, air quality, and refrigeration services.  We are here to exemplify customer service and resolve any difficulties you may face with prompt scheduling, dedicated job performance, and 24/7 Emergency Repair throughout Hurricane, Huntington, Charleston, South Charleston, St. Albans, Dunbar & Milton, WV.

When your gas furnace isn’t blowing hot air, the issue could be due to a faulty pilot light or broken ignitor. Remove the furnace cover panel and visually inspect whether you can see a flame from the pilot light. A natural gas furnace will be blue and yellow in color, and a propane furnace should have a bluish green flame with a yellow tip. If you can see a flame and it appears normal, the issue could be related to the furnace blower motor or other complex furnace parts. If the flame appears low or non-existent, it’s best to contact an experienced furnace repair company. Remember to never touch any open wires; contact a professional.

Yes. You should expect to pay a diagnostic fee to cover the cost of the technician's visit, the diagnosis of your air conditioner's problem, and a quote for the repair options. You will be advised of the issue along with recommended options to correct it, which may include a system replacement if your unit is old or significantly damaged. If you decide to replace the system, the diagnostic fee will be credited toward your replacement purchase.

As the largest heating company in the Northwest, Washington Energy Services has fixed thousands of heating systems. We service most major brands of heating equipment, including York, Bryant, Carrier, Lennox, Coleman and Rheem. Our NATE certified, factory trained service technicians are standing by for furnace service, and also heat pump and air conditioning repair. Home owners from Sea-Tac to Lynnwood trust Washington Energy Services for furnace service and repair. Schedule your service today!

To keep your furnace in good working order it’s important to have it regularly cleaned. The national average furnace cleaning cost ranges from $60 to $80, though prices can vary greatly based on where you live in the country and what your furnace maintenance includes. An HVAC company may have different rates for different levels of furnace maintenance. For example,one company may offer general furnace maintenance for $79 and advanced maintenance for $138. Another company may offer a 38-point maintenance check for $89 and a 64-point maintenance check for $178. According to Energy.gov, a standard furnace cleaning and maintenance visit can include:

If you have an older furnace with a standing pilot light, it’s possible that the pilot light has been extinguished. First, confirm that the light is out. Then, turn the gas valve to the off position and wait five minutes. If there is a reset button on your furnace, turn the valve to the pilot position and hold a flame to the dedicated pilot opening while pushing the button for about 30 seconds. (If the pilot doesn’t light on the first attempt, wait a few minutes and repeat the procedure, this time depressing the reset button for 45-60 seconds.) Once the pilot is lit, turn the gas valve back to the on position. If the pilot light won’t stay lit, it’s possible that there is an issue with the thermocouple or ignition system. Call an HVAC professional for assistance.


As your trusted furnace maintenance company, we offer local service no matter where you live. We’ll have one of our professionally trained and certified technicians out to your home within two hours of your call. Best of all, it doesn’t matter whether you purchased your furnace with us or not—no matter the make or model of your heater, we can provide the furnace maintenance it needs.  Check out some of the other great benefits of doing business with us:
The quality of your heating installation can greatly impact the quality of your overall heating experience. If your system is not carefully selected, sized and installed, there is really just no way that you can hope for it to operate at peak performance and efficiency levels. Never settle for a subpar heating installation when our Seattle heating installation technicians are available to do the job right.

Vredevoogd Heating & Cooling Grand Rapids values each and every customer. Servicing or installing your HVAC system means establishing a service relationship with each homeowner. We promise to earn your trust with our consummate level of professionalism and expert service. We back our work with the strongest industry guarantees because we value your continued business.

As Idaho’s HVAC comfort and zoning specialists, Ultimate Heating & Air handles all of your residential heating, cooling, and air quality requirements.  For every project, we target energy efficiency and reliability of your essential equipment, trimming cost of operation and ownership, while optimizing comfort.  Through industry-leading innovations in both products and strategies, we simplify the challenges of everyday life, put you in superior control over your indoor environment, and promote sustainable solutions.

Heat pumps act like an air conditioner in the summer, removing the heat from the air and then recirculating the cooled air throughout your home. In the winter, though, they can transfer ambient heat from outside into your house, efficiently warming your home with minimal energy consumption. If you do decide on a heat pump in Seattle, WA, make sure that you schedule your installation, maintenance and repair services with a skilled, qualified technician.


Though forced-air furnaces are normally quite reliable, they can break down. To avoid break downs, it pays to know how to take care of your furnace and fix it when something goes wrong. Inevitably, a furnace stops working when you need it most. Consequently, fixing becomes urgent very quickly. The following instructions will help. With a little do-it-yourself experience and the proper guidance, you can troubleshoot and repair a variety of furnace problems yourself.
×