As Idaho’s HVAC comfort and zoning specialists, Ultimate Heating & Air handles all of your residential heating, cooling, and air quality requirements. For every project, we target energy efficiency and reliability of your essential equipment, trimming cost of operation and ownership, while optimizing comfort. Through industry-leading innovations in both products and strategies, we simplify the challenges of everyday life, put you in superior control over your indoor environment, and promote sustainable solutions.
Hi This is my 1st summer owning this house. My electric bill has been doubling for 3 months in a row..I have a Carrier 25HPA6 Performance Series 2 Stage Heat Pump...I recently went online and found instructions on how to clean the outdoor unit. I did so and it was not very dirty. I also have a generator that kicks on when I lose power which does not support the AC unit..We did lose power for a few days recently. I have 2 faults showing on the heat pump unit..one being 53 outdoor air sensor not reading or out of range 255 events and F 37 control fault, heater stuck on 13 events.It is set to cool and the fan to auto. I have never had a heat pump or central Air and am very green to this.The previous owners left no manuals.I have found one online but for installation only. PLease help?
We live in a recently completed townhouse that was built with double-wall construction. That construction method was touted by the builder as what would keep sound from penetrating between the units. But we can hear the next door neighbors' TV and stereo, and sometimes voices and even snoring, through the wall. While sometimes it's the volume, mostly it's the bass sounds coming through the wall. They say they don't hear us, but we keep our bass turned down. They crank up the bass, and they are not going to change that. They also are not going to do anything construction-wise to help from their side. What is the best way for us to try to block the low frequency/bass sounds from penetrating the existing wall into our side?
Tyler M came to my house today to clean the furnace fan and motor, and to check the furnace efficiency. He arrived on time, did a great job on the furnace. The fan was really dirty and did more work than was requested as a courtesy - and still charged the quoted price. Tyler was friendly, courteous, very knowledgeable, and was very efficient in completing the work. I would definitely recommend Tyler M and Swan plumbing and Heating for excellent work at a very reasonable price.
This makes heat pumps a highly energy efficient solution. At Bob’s Heating & Air Conditioning, our Federal Way heat pump specialists often recommend heat pumps because they allow our customers to use a single system year–round. As a highly energy efficient device, your heat pump may also save you money in the long term. Let us take care of your heat pump needs in Federal Way, WA, whether that’s installation or repair.
As touched on by their name, heat pumps function by transferring heat energy indoors during the winter and outdoors from your home during the summer. They're often attached to air conditioning units, using the surrounding air to transfer energy. However, geothermal heat pumps and water source heat pumps are also available. The cost to repair a heat pump, again, depends on the specific problem. Replacing a faulty thermostat may cost up to $300 including labor, while a worn or damaged defrost control board can set you back up to $600. For more details on your potential repair costs using this heating source, visit our heat pump repair cost guide.
Two nights ago our smoke alarm went off during the night...after a frantic search through the house we traced the source of the smoke to the furnace. After reading reviews about Affordable Furnace Repair we decided to give them a try...and we are SO GLAD WE DID! Within 10 minutes of leaving a message I received a call back and was scheduled the next day. The source of the problem was immediately identified and promptly fixed....a previous repair had messed up some wiring as well which was also fixed and now we are so glad to be back to 100%. Can't say enough about the professionalism, responsiveness and service. Highly recommend.
We offer a wide range of air conditioning services in Federal Way, WA, from the installation of new systems from scratch to the replacement of old models that have seen better days. We can also make sure that your air conditioner is routinely cleaned and inspected with our routine maintenance. As always, our air conditioning technicians are available to repair your AC at a moment’s notice. Call us today for professional air conditioning service.
Rheem manufactures and markets gas central furnaces that are available in single and multistage configurations, with some models capable of an AFUE rating of more than 90 percent. Some units meet Energy Star requirements. The average price of a Rheem central gas furnace is about $2,300 and Rheems are sold through their dealer network. Rheem products are made by the same manufacturer as Ruud.
Edwards Heating & Air continues to look for new ways to improve service. We hire only NATE-certified, extensively experienced, and dedicated professionals. We offer a wide range of products, from ductless options to heat pumps, furnaces, air conditioners, and air quality systems, guaranteed to answer the most challenging comfort demands. To maintain your equipment in peak condition, promoting year after year of uninterrupted performance, we offer preventative service plans that are affordable, convenient, and effective. If you are ever confronted with a malfunction, the team from Edwards Heating & Air is always available, 24 hours a day, 7 days a week, to provide the skilled assistance you need. Through our relationship with Wells Fargo Financial National Bank, we offer flexible financing options with approved credit to facilitate your investment into superior quality heating and cooling. Our ongoing dedication to your complete satisfaction is evidenced by our complaint-free, A+ rating by the Better Business Bureau. At Edwards Heating & Air, we do things right, every time.
A pinging or popping sound coming from the duct work can come from thermal expansion—the ductwork expanding and contracting as it heats and cools. Or, air blowing past a loose flap of metal can make the sound. Track along the duct runs, listening for the sound. If you locate it, make a small dent in the sheet metal to provide a more rigid surface that’s less likely to move as it heats and cools.
If you have an older furnace with a standing pilot light, it’s possible that the pilot light has been extinguished. First, confirm that the light is out. Then, turn the gas valve to the off position and wait five minutes. If there is a reset button on your furnace, turn the valve to the pilot position and hold a flame to the dedicated pilot opening while pushing the button for about 30 seconds. (If the pilot doesn’t light on the first attempt, wait a few minutes and repeat the procedure, this time depressing the reset button for 45-60 seconds.) Once the pilot is lit, turn the gas valve back to the on position. If the pilot light won’t stay lit, it’s possible that there is an issue with the thermocouple or ignition system. Call an HVAC professional for assistance.
Heat pumps act like an air conditioner in the summer, removing the heat from the air and then recirculating the cooled air throughout your home. In the winter, though, they can transfer ambient heat from outside into your house, efficiently warming your home with minimal energy consumption. If you do decide on a heat pump in Seattle, WA, make sure that you schedule your installation, maintenance and repair services with a skilled, qualified technician.
Ultimately, the cost to repair your furnace depends on a wide range of variables. From the brand of the units to the damaged or broken parts, you need a reliable and trusted professional who can evaluate the issue and recommend next steps. If you're unsure whether to repair or replace your furnace, or even where to begin, connect with a local furnace repair professional who can make sure that your home heats well both now and in the future.
For over two decades, Steel T Heating & Air Conditioning has provided expert heating and cooling solutions in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO. As a Carrier Factory Authorized Dealer and five-time recipient of the President’s Award, we’ve established a reputation as an industry leader, setting ourselves apart from other HVAC companies in the Denver Metro Region. Our NATE-certified team of specialists addresses every project with proficient and timely service, using state-of-the-art products and Factory-Approved replacement parts. For optimal temperature control with minimal maintenance and operational costs, call Steel T Heating & Air Conditioning at (303) 872-8849! We offer heating, air conditioning and indoor air quality services that are proven to keep your home comfortable even when local weather is at its most unpredictable.