This job involves removing the access panel, loosening a couple of bolts that hold the blower motor at the proper tension, and adjusting its distance or realigning the belt. In many cases, it’s a good idea to remove the belt and buy a replacement at a home center. Last, when reinstalling the belt, be careful not to over-tighten it; this can wear out the motor bearings.
Moncrief provides a wide range of services from high-quality energy-efficient systems, tune-ups and inspections, as well as repairs in the Roswell and Marietta areas. As a full-service heating and cooling company, we stay up-to-date on the most economical and energy-efficient systems available for your home or business. In addition, our technicians are well-trained in a wide range of systems to provide quality and cost-efficient furnace service, repairs and installation.
Our technicians explain all of your options before beginning the repair, so you can decide whether a repair or replacement is best for you. Our No Surprises Pricing—including charging by the job, not by the hour—means the price we quote you is the price you pay. If you decide that replacing your furnace is the best course of action, we can install a new, high-efficiency model in its place.
Female Technicians in Sears Careers DIY Bathroom Storage Ideas Bathroom Remodel Ideas 8 Washing Machine Maintenance Tips 8 Tips to Get Your Furnace Ready for Winter Cabinets: To Replace or Reface? Appliance repair in Fayetteville Appliance repair Santa Barbara Lansing, MI appliance repair Augusta, GA appliance repair Appliance store Raleigh York appliance repair Appliance repair Austin Appliance repair Topeka Appliance repair Louisville Appliance repair Salem, NH Paducah, KY appliance repair Evansville appliance repair Toms River, NJ appliance repair Appliance repair in Easton, PA

I have a Bosch condenser dryer that heats up and after 3-5 mins cuts out (no lights/power). After is cools a while, the machine can be restarted and runs a while longer until it shuts down again. This process repeats several times, with each progressive drying cycle being a little longer than the previous until the clothes are eventually dry.I've tested the the thermal-protector for continuity and the NTC-sensor on the heating element appears to be fine (tested for resistance). Could it be a faulty sensor/component on the control board that's getting too hot and cutting out the power? And if so, can it be easily identified/replaced, or would I need to replace the whole control board?Any help would be greatly appreciated!
Superior AC & Heat inspected my furnace on Monday and determine that I needed to replace the furnace. Since I was also desiring to add AC to my home, I decided to bundled both projects and get a new furnace and AC Unit together. The team arrive at my home Wednesday morning at 7:45 am; the new furnace was installed by 1:00 pm and they completed the AC Unit, tested it and cleaned up by 4:30 pm. Great work; I highly recommend them.
Yes. You should expect to pay a diagnostic fee to cover the cost of the technician's visit, the diagnosis of your air conditioner's problem, and a quote for the repair options. You will be advised of the issue along with recommended options to correct it, which may include a system replacement if your unit is old or significantly damaged. If you decide to replace the system, the diagnostic fee will be credited toward your replacement purchase.
You can make your home more energy-efficient in several ways. Turn down the thermostat in winter; just two degrees cooler will save you money and reduce emissions by about 6 percent. You might not even feel the difference, especially at night or when you're out of the house—a programmable thermostat can help here. Draw the curtains at night to block the chill from a cold window. Keep the windows covered on sunny days during the summer, and uncover them on sunny days during the winter to benefit from some free solar heating. Reduce heat loss from ducts by sealing leaks and, where feasible, insulating ducts.
Hello, We have a Hunter ceiling fan that no longer spins. It has power, as the light still works and when you push the remote you hear the clicking, like it's trying to engage, but the blades do not spin. Does this sound like a possible flywheel issue? I removed the Remote Receiver, part 85112-02, and apparently it's no longer available, but I don't think the receive is the problem. Any feedback would be welcome.
Looking for a local and trusted air conditioning and heater expert that is nearby? HVACs Today is here to help. Keeping your home or business heated or cooled is what we are great at. From installation to replacement and repairs, our technicians can complete your job quickly and correctly. Skilled contractors can solve your HVAC needs: no problem is too big or too small. Call us today to schedule your heating and cooling service.
Your heating and air conditioning system naturally loses energy efficiency over time. This loss of efficiency is due to many factors, including dust and dirt, natural wear and tear, and buildup in drains or on burners. Keeping your heating system maintained with regular professional tune-ups can help to reduce these factors. During your tune-up, your maintenance technician will clean and check over your heating equipment, identifying areas of wear and tear. They can identify failing parts in need of replacement before they become a serious problem. A tune-up alone may instantly improve energy efficiency by up to 30%. You’ll also enjoy cleaner air and a cleaner residence because your HVAC system will be distributing clean air through a clean air filter. Perhaps one of the greatest benefits you’ll enjoy following a fall furnace or AC tune-up is decreased utility bills. A neglected HVAC system must work much harder to heat and cool your home, while a furnace or air conditioner that has been finely tuned can take less energy to maintain indoor comfort. Because your heating system will function more efficiently, it will deliver superior heating at lower cost than you otherwise may have had through the winter season.
I can't say enough about Hassan. He is a heart of gold and we love his outlook on taking care of customers. He's honest and knows exactly what he is doing, not pretending and just pulling things apart going back and forth puzzled. He even wanted to check our unit in the attic to make sure it was safe. He puts his customers first! It was late but he still drove an hour to fix our furnace. My wife felt completely safe with him and loved him! So if you are a single woman out there, no worries. Hassan is safe to hire. 👌🏾Very good spirited guy who wants you to see your AC issues and give you options and why, with honesty! We had him to add a safety switch to our attic furnace to prevent a flood of our home in the event it has a leak issue. He put one on our basement attic that never was even an option. We are completely satisfied with his company and will be our main man now! He's a serious blessing to have. Thank you! Thank you!
You might guess it from the name: the heat exchanger is the part of your furnace that actually heats the air your blower motor pushes through the furnace. It consists of a chamber in which the heat energy produced by natural or propane gas is transferred to the forced air. At the same time, this part also includes a vent through which the gases themselves are safely removed from the unit and the air that enters your home. Because of these gases, a problem with your heat exchanger needs to be dealt with promptly. Over time, cracks in the exchanger can result in carbon monoxide leaks. Taking care of the problem once again means understanding the existence of a range: repairing your heat exchanger can cost as little as $100, but a full replacement may cost up to $1,200.
Next check and clean the furnace’s flame sensor. The video below shows you how—note that this guy fixes it in about 5 minutes. We would probably use a little bit of emory paper, but he cleans the sensor with a 5-dollar bill. Another video further down the page under the discussion of “If your furnace keeps shutting off after about 5 minutes” shows the same project with a different brand of furnace.
Though Houston heating isn’t a well-known issue, there are occasions when repairing a broken furnace is absolutely necessary. When you need heating system repair, installation, or maintenance, Abacus Plumbing will be able to help you with all your heating repair needs. We’ve been in the heating business for years and because of our HVAC expertise, our professionalism, and excellent customer service, our customers call us the best heating repair company in Houston!

Our new HVAC unit started to leak badly, so we set up an appointment for an on-site diagnosis. The two-man crew arrived in the agreed-upon window and was very experienced. They gave off the impression that they had seen just about everything before. They quickly found the source of the problem, fixed it, and explained in full what they were doing and why. They also offered up some helpful tips of what to look for and how to self-diagnose issues.
When our Denver heating company provides you with maintenance checks before the cold of winter sets in, you will be saving money in several different ways. One of the benefits of a maintenance plan is our technicians will be less likely to have to make repairs throughout the year as long as the system is properly maintained. Our Denver heating company will have your system running at its most efficient, helping to reduce your utility bills each month. An added benefit of a more efficiently running system is the positive environmental effect that it will have.
Getting the most from your air conditioner means more than just adjusting the temperature so often. While today’s air conditioners are increasingly reliable and they often last for years upon years, they must be routinely taken care of by a professional air conditioning maintenance technician if they are to function as intended. With our air conditioning maintenance in Federal Way, WA, your system is in good hands.

An annual inspection of your unit can ensure that the various potential problems mentioned above are detected early, and before they require complete replacement. During this inspection, for instance, a professional might find small cracks in your heat exchanger or a faulty seal in your blower motor. Some manufacturer's warranties even require these annual inspections to maintain validity. Typically, your furnace inspection will cost between $80 and $150 depending on the area in which you live and the professional you work with.
Read what our many satisfied customers say about Moncrief. We consistently receive 5-star reviews from both our commercial and residential customers. Moncrief's legacy of comfort and trust, as well as our great team and customer service are second to none. Contact us today to schedule an appointment or inquire about our Total Comfort Service Plan. Moncrief Heating & Air Conditioning is the company to provide the services you need in Roswell and Marietta. Call us at 404-350-2300.

Our technicians have experience repairing furnaces and will make sure your home is back to keeping your family cozy in no time. From training and certifications to our reputation for doing the job right time and time again, you can trust that James Heating & A/C, Inc’s furnace repair technicians will have your troubles taken care of and your furnace operating smoothly. Whether it’s emergency furnace repair or service you can schedule a little in advance, our team can give you peace of mind, knowing that your furnace is in good hands. Are you in need of a furnace repair? When performing a repair, it's important to hire professional HVAC contractors.

The price of a furnace generally rises in step with its fuel efficiency. A furnace with a 90 percent AFUE might cost $1,000 more than a similar size unit with an 80 percent AFUE. But you can often recoup that additional cost through lower fuel bills over the life of the furnace, especially in regions such as the Northeast and Midwest, where winters can be harsh. How quickly you recover the investment depends on more than just AFUE. The electricity to run furnaces with different AFUEs can vary significantly. The climate where you live, how well your home is insulated, and your local gas and electricity rates also affect payback times.
Ultimately, the cost to repair your furnace depends on a wide range of variables. From the brand of the units to the damaged or broken parts, you need a reliable and trusted professional who can evaluate the issue and recommend next steps. If you're unsure whether to repair or replace your furnace, or even where to begin, connect with a local furnace repair professional who can make sure that your home heats well both now and in the future.
We are committed to providing you with services that are effective and efficient. We do the job right the first time, but more importantly, we won't charge our customer when we didn’t fix it the first time. For almost 30 years, we have been providing our customers with work from industry-certified technicians. Our team has the skill and knowledge to get the job done right the first time out!

Your furnace's flame sensor is essentially a safety mechanism. As a thin metallic rod in front of the flame inside the unit, it's sole purpose is to confirm that your gas valves only open when a flame actually exists to burn that gas. When the flame sensor stop working, on the other hand, gas leaks can occur. To repair your furnace's flame sensor, expect to spend between $80 and $250. Even a full replacement of this part typically does not go above that range.
Furnace World, is a Colorado (CO) Heating and Cooling contractor located in El Paso County. We provide quick excellent service for any customer issues that involve their air conditioning, furnace repair, replacement or maintenance needs. Furnace World & air conditioner repair or, furnace repair as well as all air conditioner replacements, furnace replacements in Black Forest CO, Colorado Springs CO, Falcon CO, Fountain CO, Manitou Springs CO, Monument CO, Security CO Widefield CO. To set-up a repair service estimate or replacement estimate, call 719-473-9276. So when you ask to find "A good heating and air conditioning repair or service company near me," you've come to the right place. Furnace World services all furnace, AC, humidifier, filter, thermostat and water heater brands including Carrier, Bryant, Payne, Trane, Lennox, Rheem, Ruud, Amana, Gibson, Goodman, American Standard, Aprilaire, Honeywell, Mitsubishi, White Rodgers, and Skuttle.
Even if your air conditioning unit is still working, depending on the type of system in your home today, you could recoup your investment in a new system in as little as three years. However, that doesn't mean that your system needs to be replaced. Furnaces, air conditioners, and other heating and cooling systems have made tremendous gains in efficiency over the past five years, so if you have an older unit, it is worth taking a look at whether or not a repair is the best investment.
Customer would like to have her furnace maintained before winter. She would also like her blower wheel and assembly cleaned. System was operational upon arrival. I checked the components within the unit and found the blower capacitor was out of specifications. It was replaced with new one. Blower assembly was pretty dirty. I cleaned the assembly. Burner assembly was ok, I cleaned flame rod. CO output was nominal. Heat output was also nominal. No other issues at this time.
There are many signs that can indicate the need for professional air conditioning repair service in Seattle, WA. You may notice that your air conditioner does not cool your home evenly, or that there is a spike in your air conditioning costs. Regardless of what tips you off, it is important that your air conditioning repair services are completed properly.

Thank you Caleb Elliott for servicing our water heater. We are ready for winter! Caleb was very personable and did a thorough job servicing our water heater. We appreciate Reliable's commitment to service and keeping things running for us. Every service person we've had has been top notch. So glad we chose Reliable to take care of us. Continue reading...

No matter how well you take care of your system, there will come a time when it simply runs out of gas. When your heater cannot be restored with repair work, our team will replace your old system with a new, energy-efficient unit. Working with all makes and models, our comfort specialists have access to the most superior, affordable and effective heating systems on the market.
When it comes to saving money, using a free online coupon is a no-brainer. We offer these coupons to our customers who complete the online form to help reduce the cost of the service. Please note that the , the 30.00 off work performed coupon serves as an plumbing, HVAC and electrical coupon as well. Not many plumbing companies can boast that they also provide additional HVAC as well as Denver Electrical services, however at Brothers Plumbing, Heating and Electric – we do it all! It is important to call a professional when problems arise, and we will help you out every step of the way, including discounts!
Ultimately, the cost to repair your furnace depends on a wide range of variables. From the brand of the units to the damaged or broken parts, you need a reliable and trusted professional who can evaluate the issue and recommend next steps. If you're unsure whether to repair or replace your furnace, or even where to begin, connect with a local furnace repair professional who can make sure that your home heats well both now and in the future.
As a Carrier Factory Authorized Dealer, Edwards Heating & Air provides superior quality products and workmanship to home and business owners in Acworth and across Acworth, Alpharetta, Cummings, Cartersville, Kennesaw & Woodstock, GA.  Our NATE-certified technicians adhere to strict installation and service procedures, and are uniquely qualified to recommend the most cost-effective solutions to meet your exact needs and expectations.  Whether you are in the market for an HVAC system for new construction, a replacement unit, ductless options, heat pumps, or air conditioning, Edwards Heating & Air ensures a refreshingly cool and healthy home and work environment.  Through accurate sizing, precision installation, and conscientious maintenance, we help you enjoy maximum return from your investment and reliable operation, year after year.  For any cooling challenge you may face, the team from Edwards Heating & Air are your problem solvers, and we are always here when you need us, 24 hours a day, 7 days a week.
“Walter Zainey started the Greenwood Furnace Co. in the Greenwood neighborhood of Seattle in 1918 and quickly built a reputation for providing quality products and services. For years we believed Greenwood began in 1921 but only recently, May of 2017, Walter’s granddaughter shared a newspaper ad from 1968 showing that Greenwood was actually founded in 1918! When your company goes back 100 years you are bound to have mixed messages about the history but we now have an accurate founding date and founder. Thank you to the Zainey family and especially Jacklyn for taking the time to share the story with us. I am sure Walter Zainey would be proud the heritage he created is still living on.
Tired of dealing with an inoperable furnace? Or, maybe your heating system is only heating half the rooms in your home? Whether you need a new heating system installed or an existing unit repaired, there’s only one name to know—ABC Plumbing, Heating, Cooling & Electric. With more than six decades of experience handling Chicago’s heating problems, our team at ABC has the experience and know-how to get any heating issue diagnosed and resolved quickly and efficiently.
Drilon and Jeremy came out to the house for snaking the sewage line and performing an AC tune up. They were very informative, kind, respectful and professional. Drilon went above and beyond by giving me a whole walk through on our furnace, AC unit and water heater and giving suggestions and prioritizing what he thought would be the most important and safe for our new house right now. They were not pushy with their sales tactics and I will definitely be using them when we are ready to replace our features.

Keeping too many heat registers closed can cause heat to build up in your furnace, forcing air out of duct leaks and requiring the blowers to compensate for the added pressure. Essentially, blocking heating vents causes your furnace to work harder and longer than it is intended to work. Further, it forces air pressure to build up in your air ducts, which may both cause and worsens airflow leaks — particularly at joints and seams. Pros recommend keeping at least 80 percent of your heating registers open to prevent unnecessary air from building up in your furnace.


All of our AC repair technicians and teams at our HVAC and air conditioning company in Gloucester County are extremely knowledgeable, dependable, helpful and just like members of the family. This family atmosphere helps us provide our valued customers in the towns of Haddonfield, Sewell, and all of South Jersey with top-notch service, because everyone here takes great pride in their work.

Heating your home is an essential part of feeling comfortable while indoors and is also essential for health and safety during a chilly winter evening. When temperatures dip into the 20s and 30s, you need emergency heating repair in Houston. From general repairs like pumps, gas valves, heat exchangers, diverter valves, flow switches and fans, to total heating system replacements and installations, Abacus Plumbing can ensure your home is warm when it needs to be. Don’t be left out in the cold! Call Abacus Plumbing today for a quality, reliable heater repair company in the Houston area.

Adam V. from Swan Plumbing & Heating of Denver, CO came out and tuned up our furnace and A/C units. He was courteous prompt and professional, but beyond that went out of his way to give us recommendations on things we can do to get the most life and performance out of our existing equipment. When we are ready for upgrades and additional services, Swan will be our first (and only) call.

Sometimes a heating and air conditioning system just needs to be repaired rather than completely replaced. You may need air conditioning repair services if there is leaking around the outside unit, the air coming into the house isn't hot or cool enough, the unit is short-cycling or constantly turning on and off, using the system is consistently resulting in higher-than-normal energy bills, or if there is excessive noise during startup and operation.


When you change the temperature on your thermostat, or the temperature in your home drops, a signal lets the furnace's igniter know that it's time to turn on. Igniters exist in both hot water boilers and forced air furnaces, replacing pilot lights as the switch your unit needs to kick on. Naturally, this is a core part in making sure it works reliably. When it stops working, your unit will not longer know when to actually heat your home. Fortunately, furnace igniter repair doesn't tend to be a major budget problem, and costs less than $300 on average.
We tend to have fairly moderate winters in Federal Way, WA, and that means a heat pump works well down here. A heat pump works much like a central air conditioner in that it circulates a refrigerant that transfers thermal energy from one place to another. But heat pumps not only cool your home during the summer, but also heat your home during the winter.
The team at Steel T Heating & Air Conditioning is highly qualified, knowledgeable, and efficient when it comes to indoor air quality solutions in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO. The quality of your indoor air can have a significant impact on your health, energy bills, and comfort. We offer air filters, air purifiers, and humidifiers based on your specific needs and desires. As a Carrier Factory Authorized Dealer, we are able to provide superior products, as well as installation, maintenance, and repair services. With reliable service and air quality systems, you’ll be able to enjoy your home while also saving money and improving your health. Give us a call today to learn more and we’ll help you determine the best system for you!

Furnace World, is a Colorado (CO) Heating and Cooling contractor located in El Paso County. We provide quick excellent service for any customer issues that involve their air conditioning, furnace repair, replacement or maintenance needs. Furnace World & air conditioner repair or, furnace repair as well as all air conditioner replacements, furnace replacements in Black Forest CO, Colorado Springs CO, Falcon CO, Fountain CO, Manitou Springs CO, Monument CO, Security CO Widefield CO. To set-up a repair service estimate or replacement estimate, call 719-473-9276. So when you ask to find "A good heating and air conditioning repair or service company near me," you've come to the right place. Furnace World services all furnace, AC, humidifier, filter, thermostat and water heater brands including Carrier, Bryant, Payne, Trane, Lennox, Rheem, Ruud, Amana, Gibson, Goodman, American Standard, Aprilaire, Honeywell, Mitsubishi, White Rodgers, and Skuttle.
Carrier is another leading manufacturer and marketer of gas central furnaces. Carrier central furnaces are available in single and multistage configurations, with some models capable of an AFUE rating of more than 90. Carrier markets units that meet Energy Star requirements and makes others that it claims offer quiet operation. A new line of hybrid heat systems that uses gas and an electric heat pump was recently introduced. The average price of a Carrier central gas furnace is about $2,800 and Carriers are sold through their dealer network.
Whether you’re satisfied with your water heater’s performance or not, you would do well to take advantage of our professional water heater services in Federal Way, WA. Water heaters are sturdy and reliable when professionally installed and serviced, but there may come a time when you need to call on the Federal Way water heater experts at Bob’s Heating & Air Conditioning for water heater repairs.
Start with your utility company; they can help a great deal. Comparing previous bills isn't always a good measure, as the weather is never exactly the same month to month. Instead, if you take your energy bill and divide it by the square footage of livable space in your home, don't count areas like unfinished garages or basements -- you can calculate how much you are spending to heat or cool each square foot of your home. Your energy provider can tell you what the average cost per square foot is in your region for that same period of time so you can compare apples to apples.
The motor belt should be firm, giving no more than ½ inch when pressed. It should also be free of cracks and damage. To remove the belt, you will need a wrench and a replacement belt. Loosen, do not remove, the motor bolts. You only need them loose enough to move the motor and slacken the belt. Remove the belt and inspect it, replacing it with a new one if necessary. Belt: $4.00 to $6.00.
Tired of dealing with an inoperable furnace? Or, maybe your heating system is only heating half the rooms in your home? Whether you need a new heating system installed or an existing unit repaired, there’s only one name to know—ABC Plumbing, Heating, Cooling & Electric. With more than six decades of experience handling Chicago’s heating problems, our team at ABC has the experience and know-how to get any heating issue diagnosed and resolved quickly and efficiently.
If your furnace has a pilot light, look for the flame. Check your owner’s manual or the instructions posted inside the furnace cabinet for step-by-step lighting instructions. Usually this involves first turning the gas valve to Off and waiting a couple of minutes. Then you turn it to Pilot. Next, press and hold it down while you light the flame. Last, wait a minute or so, release it, and then turn it to On.
×