Do you need expertise in HVAC? Roswell and Marietta residents who choose Moncrief Heating & Air Conditioning get the benefit of over 118 years of reputable experience in air conditioning and furnace repair, service and installation. Whether you have an emergency or need routine service, we are available 365 days a year. Call us today at 404-350-2300.

Gas furnaces and heaters have control shutoffs to prevent gas leaks, but they are not fail-safe. If you smell gas in your house, do not turn any lights on or off, and do not try to shut off the gas leading to the furnace. Get out of the house, leaving the door open, and immediately call the gas company or the fire department to report a leak. Do not re-enter your home.


Misurelli Sorensen Heating & Air Conditioning, is a Wisconsin (WI) Heating, Cooling, Air Conditioning, Geothermal Heat Pump, Ductless Mini-Split, Boiler, Water Heater, Fireplace, and Furnace repair, service, replacement, and maintenance Company located in all of Metro Milwaukee. Misurelli Sorensen Heating & Air Conditioning employs only the best technician for air conditioner, furnace, and boiler repair as well as all air conditioner, furnace, and heat pump replacement in Kenosha WI, Somers WI, Racine WI, Pleasant Prairie WI, Sturtevant WI, Woodworth WI, Bristol WI, Benet Lake WI, Union Grove WI, Franksville WI, Caledonia WI, Salem WI, Kansasville WI, Trevor WI, Camp Lake WI, Silver Lake WI, Oak Creek WI, Wilmot WI, South Milwaukee WI, Franklin WI, New Munster WI, Bassett WI, Rochester WI, Twin Lakes WI, Waterford WI, Cudahy WI, Burlington WI, Greendale WI, Muskego WI, Milwaukee WI, Saint Francis WI, Powers Lake WI, Hales Corners WI. So when you ask to find "A good heating and air conditioning repair or service company near me," you've come to the right place. To set-up a repair service estimate or replacement estimate, call (262) 551-9121. Misurelli Sorensen Heating & Air Conditioning services all furnace, AC, humidifier, filter, thermostat and water heater brands including Carrier, Bryant, Payne, Trane, Lennox, Rheem, Ruud, Amana, Daikin, Mitsubishi, Fujitsu, Crown, Frigidaire, Gibson, Goodman, Lochinvar, Maytag, Weil McLain, A O Smith, Kohler, American Standard, GeoExcel, General, Aprilaire, Honeywell, White Rodgers, Dynamic and Skuttle.
Customer has a 3 year old American Standard gas furnace, she said that her furnace and thermostat were fried and not working. She had an electrician come by and inspect it, but he wasn't able to do anything. Upon investigation, I found that the thermostat has failed due to a power surge that hit the home. I also found that the fuse on the control board was blown and the contactor at the condenser was fried along with wiring. I replaced thermostat, contactor, and fuse/wiring and tested all modes of operation. All components are within manufacturers specifications and system fully operational. Recommend annual maintenance and power surge protector for either home or equipment.

Customer has a 3 year old American Standard gas furnace, she said that her furnace and thermostat were fried and not working. She had an electrician come by and inspect it, but he wasn't able to do anything. Upon investigation, I found that the thermostat has failed due to a power surge that hit the home. I also found that the fuse on the control board was blown and the contactor at the condenser was fried along with wiring. I replaced thermostat, contactor, and fuse/wiring and tested all modes of operation. All components are within manufacturers specifications and system fully operational. Recommend annual maintenance and power surge protector for either home or equipment.
Tyler M came to my house today to clean the furnace fan and motor, and to check the furnace efficiency. He arrived on time, did a great job on the furnace. The fan was really dirty and did more work than was requested as a courtesy - and still charged the quoted price. Tyler was friendly, courteous, very knowledgeable, and was very efficient in completing the work. I would definitely recommend Tyler M and Swan plumbing and Heating for excellent work at a very reasonable price.
Jeremi came out and serviced our air conditioner, checked our furnace, replaced our filter, set our thermostat and cleaned our alot of cottonwood out or our air conditioner on the side of our house. He was a great technician and did and great job. after he adjusted everything and cleaned out the vents in the air conditioner outside the house was cooler than it was. He is a nice man and very personable. Both my wife and I were very happy and satisfied with his work. the service was done on Thursday, July 21st, 2016

Wow!!! I had a gas leak with all my kids and animals in the house in the middle of the night!!! Scary!! Jake showed up quickly after all gas was shut off and spent six hours at my house until heat worked, gas was on again and most importantly my family was safe. And all at a cost that was conscious of my intent to stay financially in the game to support my kids!!!
But even if your system is not yet at its breaking point, there are other reasons to consider professional air conditioning replacement service in Federal Way, WA. For example, if you find that your AC is highly inefficient because of its age or damage, then it may make more financial sense to invest in a new system so that you can take advantage of today’s energy efficient technology.
To make sure the unit you select is the right size for your home, the Sears HVAC expert does an electronic load calculation estimate to determine the exact type of heat and air conditioning system that’s just right for your home–we don’t just replace it with the same size unit you currently have. These calculations take into consideration things such as the size of your home, its exposure to the sun and wind, the number and size of windows, how well insulated it is and more. This step is essential so the unit isn’t too small or too large–both waste energy.

Having a company take care of all your heating and cooling needs shouldn’t indicate that you’re stuck with any ordinary shop who cuts corners. Heating and cooling has been our excitement since 1967, and it’s apparent in the work we offer to our customers. We’re committed to offering you the very best when it comes to all things HVAC, whether it’s service, maintenance or heating and cooling systems.
Start with your utility company; they can help a great deal. Comparing previous bills isn't always a good measure, as the weather is never exactly the same month to month. Instead, if you take your energy bill and divide it by the square footage of livable space in your home, don't count areas like unfinished garages or basements -- you can calculate how much you are spending to heat or cool each square foot of your home. Your energy provider can tell you what the average cost per square foot is in your region for that same period of time so you can compare apples to apples.
About us: Vredevoogd Heating & Cooling has been in business since 1964. As a financially stable company known for its reliable expertise and first-rate customer care, Vredevoogd Heating & Cooling is a company you can trust. Moreover, when you do business with a stable business like Vredevoogd Heating & Cooling, you have the peace of mind of knowing that your warranties are solidly backed by a company that intends to remain in business for another 50+ years and beyond. Don’t trust your essential home systems and investment to any fly-by-night company. Our best practices ensure that we will be here to meet our customer’s HVAC needs for decades to come. Vredevoogd Heating & Cooling founder Dennis Vredevoogd set the high standards by which the company continues to pride itself for. Today, the company continues to be family owned and operated by the founder’s sons, Michael and Thomas, who are committed to maintaining the company’s high standards and complementing them with the innovative technical know-how needed to service today’s advanced HVAC systems.
The thermocouple is a copper rod that the pilot flame heats-up. When it gets hot enough, the thermocouple signals that there is enough heat to burn the gas fuel being released into the appliance—and so it allows the gas to be released to the burners. In some cases where the pilot light won’t stay lit, the thermocouple needs to be adjusted or replaced. This is generally a job for a professional.
When your gas furnace isn’t blowing hot air, the issue could be due to a faulty pilot light or broken ignitor. Remove the furnace cover panel and visually inspect whether you can see a flame from the pilot light. A natural gas furnace will be blue and yellow in color, and a propane furnace should have a bluish green flame with a yellow tip. If you can see a flame and it appears normal, the issue could be related to the furnace blower motor or other complex furnace parts. If the flame appears low or non-existent, it’s best to contact an experienced furnace repair company. Remember to never touch any open wires; contact a professional.
When winter sets in across Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO, keeping a warm and comfortable home becomes a priority.  An efficient, safe, and reliable heating system is crucial.  You can count on Steel T Heating & Air Conditioning to keep costs down and rewards high, protecting your ongoing satisfaction with skilled installation, system replacement, seasonal maintenance, and heating repair.  As a Carrier Factory Authorized Dealer, we remain at the forefront of temperature control, specializing in effective heating service procedures and a wide range of the most technologically advanced equipment on the market.  Let us improve the quality of your comfort, enhance energy efficiency, and put precision control over your indoor environment at your fingertips. Contact us today for heating service in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO. Our NATE-certified technicians are always on call to provide Emergency Service, 24 hours a day, 7 days a week, and every project is handled quickly, accurately, and with unfailing professionalism.

I'd had them come out before and called because my thermostat wasn't getting power. They said they don't service townhomes. I said that must be a new policy because they've been out before and she said they've had it for awhile. I tried to ask why they don't service townhomes and she said they don't service attached homes or commercial properties. I said that my home isn't commercial and it doesn't really answer my question, but I guess I'll go elsewhere. I couldn't find this policy on their website and I can't really understand why a townhome furnace would be different than an unattached home. When they came out before I seem to remember they did a good job, so it's too bad they have odd policies now.

For starters, once a year, vacuum out the area around the furnace’s blower. If possible, also slide out the fan unit, clean each fan blade with a toothbrush, and then vacuum with a brush attachment on a vacuum cleaner. While you’re at it, look for oil ports on the motor, normally located near the motor shaft. If the motor has these, apply two to three drops of non-detergent motor oil into each port (you may have to remove a cover plate to do this). Though most contemporary motors don’t require lubrication, do lubricate motors with oil ports once a year. For more about maintenance, see Maintenance Checklist for Central Heating Systems.
Any forced air system in your home - whether it is powered through electric or gas-generated energy - requires a blower motor. This component consists of an electric motor and fan, and is responsible for pushing air evenly through the furnace. As hvac.com points out, you can easily identify the blower motor in your furnace as the part that looks similar to a hamster wheel at the bottom of the unit. If it stops working, the air needed to heat your home will no longer be pushed through the furnace to be heated and distributed evenly. In that case, you need to inquire about potential repairs. Blower motor repair typically costs between $150 for a simple fix, and $450 for complete replacement and installation of the part. Where you land on that range depends on the exact damage.

I have a Bosch condenser dryer that heats up and after 3-5 mins cuts out (no lights/power). After is cools a while, the machine can be restarted and runs a while longer until it shuts down again. This process repeats several times, with each progressive drying cycle being a little longer than the previous until the clothes are eventually dry.I've tested the the thermal-protector for continuity and the NTC-sensor on the heating element appears to be fine (tested for resistance). Could it be a faulty sensor/component on the control board that's getting too hot and cutting out the power? And if so, can it be easily identified/replaced, or would I need to replace the whole control board?Any help would be greatly appreciated!
All of our AC repair technicians and teams at our HVAC and air conditioning company in Gloucester County are extremely knowledgeable, dependable, helpful and just like members of the family. This family atmosphere helps us provide our valued customers in the towns of Haddonfield, Sewell, and all of South Jersey with top-notch service, because everyone here takes great pride in their work.
If you’re looking for a professional heating company in Denver with the proper experience to handle your project, our crew has many years of training and experience on most major heating systems available in the Denver area. Our heating company in Denver understands that in some situations, the scope of the damage may put the units beyond repair. In this instance, we can offer you help finding the right energy efficient model that will provide you warmth and savings in your wallet. Heating in Denver can be expensive during the coldest time of year, so choosing the right heating system can give the same amount of heat while at the same time providing big savings when our Denver heater repair technicians help you pick the right system for your home.
When is water heater replacement necessary? If your system breaks down irreparably without any hope for repair, then it’s fairly obvious what needs to be done. But there are other reasons for considering water heater replacement in Federal Way, WA as well. For example, you may want to consider replacing your old model if it no longer works efficiently or effectively, even if it still runs.
Moncrief provides a wide range of services from high-quality energy-efficient systems, tune-ups and inspections, as well as repairs in the Roswell and Marietta areas. As a full-service heating and cooling company, we stay up-to-date on the most economical and energy-efficient systems available for your home or business. In addition, our technicians are well-trained in a wide range of systems to provide quality and cost-efficient furnace service, repairs and installation.
As a family business owned and operated by the Young family, we have been providing quality air conditioning repair and heating service since 1992. Allow us to show you why we deliver “peace of mind” by virtue of everything we do to make your home environment as comfortable and healthy as it can possibly be. If you need service in the Eastern Panhandle, WV area, we’re here to help! Call today!
If you need a furnace repaired or an air conditioner serviced, we'll send a local technician out to diagnose the specific problem and recommend solutions for you and your family. There will be a diagnostic fee for the visit, and any specific repairs will be an additional charge. If replacing your system is the best solution, the fee for the diagnosis will be credited toward the purchase and install of a new system.
We tend to have fairly moderate winters in Federal Way, WA, and that means a heat pump works well down here. A heat pump works much like a central air conditioner in that it circulates a refrigerant that transfers thermal energy from one place to another. But heat pumps not only cool your home during the summer, but also heat your home during the winter.
Getting the most from your air conditioner means more than just adjusting the temperature so often. While today’s air conditioners are increasingly reliable and they often last for years upon years, they must be routinely taken care of by a professional air conditioning maintenance technician if they are to function as intended. With our air conditioning maintenance in Federal Way, WA, your system is in good hands.
High-efficiency condensing furnaces (90% AFUE and above) are a bit more complex than conventional furnaces. The main differences between a conventional and condensing furnace is the heat exchanger technology used to extract heat from the combustion process and the method used to exhaust the combustion gases. In these ways, the furnaces are very different. The condensing furnace does not have a significantly more efficient combustion process than does a conventional furnace; both use gas burners with electronic ignition. The difference lies in that the condensing furnace has a more efficient heat extraction process after combustion.
×