As Idaho’s HVAC comfort and zoning specialists, Ultimate Heating & Air handles all of your residential heating, cooling, and air quality requirements.  For every project, we target energy efficiency and reliability of your essential equipment, trimming cost of operation and ownership, while optimizing comfort.  Through industry-leading innovations in both products and strategies, we simplify the challenges of everyday life, put you in superior control over your indoor environment, and promote sustainable solutions.


Our goal is to make you more comfortable in your home. When your furnace, central air conditioner, heat pump or boiler stops working and you need service, call the professionals at BGE HOME. Heating and cooling system breakdowns occur at the most inconvenient times, so rely on our certified, skilled technicians to make the repair quickly and correctly the first time.
The quality of the air you breathe affects your comfort, health, and productivity.  Whether at home or in the workplace, an ample supply of fresh, clean air is essential to everyday life.  Whatever concerns you may face, Edwards Heating & Air provides proven, cost-effective products to significantly improve Indoor Air Quality.  Our NATE-certified specialists are qualified to analyze your residential or commercial space, make informed recommendations, and implement a strategy specifically targeted at your unique circumstances.  As a Carrier Factory Authorized Dealer, we are extensively trained in leading-edge products that silently and effectively eliminate harmful bacteria, fumes, chemicals, viruses, smoke, and much more.  The installation of a humidifier, ventilator, air filter, or UV lamp will protect the health of your indoor breathing air, maintain a cleaner, more comfortable home, and even reduce energy costs.  Contact the specialists from Edwards Heating & Air for trusted solutions and complete peace of mind.  
When it comes to heater repair in Denver, a properly serviced system means significant savings for the homeowner. When a Denver heating technician inspects your system before the winter sets in, the first thing they will check is the condition of the air filters. These filters are important, because they are responsible for removing contaminants, allergens, and dust particles from the air every time the system is turned on. When the filters are clogged, expect more particles to easily pass through right into the air you breathe inside the home. The Denver heating experts will inspect and replace any filters that are no longer effective.
I hired Scoa remodeling to work on a house built in 1953 that I am about to sell. There was rotten wood all along the exterior facia which needed replacing and painting. Mr. Wilkins proposed a plan to repair the wood, and pressure wash and paint the exterior. His work was quick and very professional so I hired Scoa to paint the interior and fix some buckled dry wall. Mr. Wilkins repaired dry wall, fixed a minor mold problem and painted the interior of the house. The work took about 1 1/2 months and was very professional. He gave me a fair price on all the work. I will hire him again at my next place. Also, I hired Jimmy for an entire home remodel and he handled the entire renovation for me. He painted the interior and exterior and painted the kitchen cabinets so now they look brand new. He installed brand new hardwoods in the kitchen and sanded and polished the existing hardwoods so they look brand new also. He renovated two bathrooms with new tile and glaze to the existing tub so that looks brand new as well. He installed all the new fixtures and appliances in the kitchen. You can hire Jimmy for small jobs or very large jobs. His prices are very good and his quality is excellent. I highly recommend him and I will call him my self for future jobs.
Furnace Service and Repair in Snohomish , WA Furnace Service and Repair in Woodinville , WA Heating Repairs in Bothell , WA Heating Repairs in Everett , WA Furnace Service and Repair in Everett , WA Gas Fireplace, Gas Logs Service in Bothell , WA Water Pipe Replacement Services in Bothell , WA Service in Everett , WA Water Pipe Replacement Services in Everett , WA Water Pipe Replacement Services in Stanwood , WA Service in Mukilteo , WA Furnace Service and Repair in Edmonds , WA Furnace Service and Repair in Seattle , WA Gas Fireplace, Gas Logs Service in Everett , WA Heating Repairs in Mukilteo , WA Service in Snohomish , WA Gas Fireplace, Gas Logs Service in Stanwood , WA Furnace Service and Repair in Lake stevens , WA Service in Bothell , WA Pellet Stove Service or Repair in Everett , WA Chimney Repair in Seattle , WA Furnace Service and Repair in Bothell , WA Fireplace Cleaning in Everett , WA Gas Fireplaces and Gas Logs in Bothell , WA Gas Fireplaces and Gas Logs in Kenmore , WA

Bryant has been an industry leader of heating and cooling products for over a century. Innovative Bryant HVAC systems provide dependable solutions to home and commercial comfort and air quality. With everything from heat pumps to gas furnaces and air conditioning systems, Bryant has the products that offer leading-edge technology and precision engineering. Call us today to learn more!
Tyler M came to my house today to clean the furnace fan and motor, and to check the furnace efficiency. He arrived on time, did a great job on the furnace. The fan was really dirty and did more work than was requested as a courtesy - and still charged the quoted price. Tyler was friendly, courteous, very knowledgeable, and was very efficient in completing the work. I would definitely recommend Tyler M and Swan plumbing and Heating for excellent work at a very reasonable price.
There may come a time when air conditioning repair is not enough. If you find that your air conditioner breaks down irreparably, then you may need to opt for air conditioning replacement service. At Bob’s Heating & Air Conditioning, our Federal Way air conditioning replacement technicians can make certain that you make an informed decision about the status of your AC, whether you have a heat pump or central AC.
If you’re looking for a professional heating company in Denver with the proper experience to handle your project, our crew has many years of training and experience on most major heating systems available in the Denver area. Our heating company in Denver understands that in some situations, the scope of the damage may put the units beyond repair. In this instance, we can offer you help finding the right energy efficient model that will provide you warmth and savings in your wallet. Heating in Denver can be expensive during the coldest time of year, so choosing the right heating system can give the same amount of heat while at the same time providing big savings when our Denver heater repair technicians help you pick the right system for your home.

Locally owned and family operated, M and M, Heating & Cooling, Plumbing & Electrical customizes solutions to perfectly fit your requirements and lifestyle. We specialize in a wide range of services including plumbing, water heating, indoor air quality, and residential and commercial temperature control. Our team of highly trained and certified technicians are fully licensed and insured, adhere to strict service procedures, and meet exacting standards of quality. Call on M and M, Heating & Cooling, Plumbing & Electrical at (720) 443-6119 for dedicated service throughout Longmont, CO & surrounding areas, and have confidence in a rewarding experience and long-term results. With over eighteen years of satisfied customers, we take great pride in a job done right.
When you change the temperature on your thermostat, or the temperature in your home drops, a signal lets the furnace's igniter know that it's time to turn on. Igniters exist in both hot water boilers and forced air furnaces, replacing pilot lights as the switch your unit needs to kick on. Naturally, this is a core part in making sure it works reliably. When it stops working, your unit will not longer know when to actually heat your home. Fortunately, furnace igniter repair doesn't tend to be a major budget problem, and costs less than $300 on average.
The professionals here at Brothers Plumbing, Heating and Electric are well trained, experienced and seasoned experts. We have been the go-to plumbing, electrical and HVAC company in the area for over 35 years and we always come highly recommended by our many satisfied customers. We offer a 100% satisfaction guarantee, have an A+ Rating with the BBB, won the Thornton “People’s Choice Award” for 2016, drug test and background check all of our employees, email you a picture of the technician who will be providing the service before arrival and call once the service is complete to ensure 100% satisfaction. So what are you waiting for? With our competitive pricing, trained and experienced technicians, and well-rounded list of home services, we’re clearly the company to trust. Get in touch with us here at Brothers Plumbing, Heating and Electric to schedule your needed service today!
Among the leading ways to prevent a breakdown and make sure it runs like a lean machine is with yearly scheduled tune-ups on your furnace. Just like any mechanical equipment, the useful life of a furnace will be enhanced with preventive maintenance, by ensuring that all the elements of the unit are running efficiently. In addition, regular cleanings can help pinpoint concerns before they become big problems and you end up paying emergency rates on a cold winter night. Plus, because furnaces burn fuel to make it hot, it’s important to inspect all the various pieces to ensure there aren’t any ruptures or leaks that could impact the safety of your family. Taking the time to schedule a tune-up, even when it’s not making that odd rattling noise you’ve been ignoring, will save you time, stress, and money throughout the heating season.

Two nights ago our smoke alarm went off during the night...after a frantic search through the house we traced the source of the smoke to the furnace.  After reading reviews about Affordable Furnace Repair we decided to give them a try...and we are SO GLAD WE DID!  Within 10 minutes of leaving a message I received a call back and was scheduled the next day.  The source of the problem was immediately identified and promptly fixed....a previous repair had messed up some wiring as well which was also fixed and now we are so glad to be back to 100%.  Can't say enough about the professionalism, responsiveness and service.  Highly recommend.
Adam V. from Swan Plumbing & Heating of Denver, CO came out and tuned up our furnace and A/C units. He was courteous prompt and professional, but beyond that went out of his way to give us recommendations on things we can do to get the most life and performance out of our existing equipment. When we are ready for upgrades and additional services, Swan will be our first (and only) call.
Wife and I bought a fixer-upper last year. One of the issues it had was a lack of heating for the house. I called Affordable Furnace Repair and they sent Don out. He checked on the furnace and found one of the heating elements had gone bad. He fixed it quickly and we had a warm winter. Plus we got a box of filters for cheap from him, all around good service.
The flame sensor safeguards your furnace against the unsafe burning of fuel, and a dirty flame sensor may cause your furnace to function improperly. Typically, the flame sensor comes in the form of a rod that can be found near the back of the furnace, right in the path of the burner. To clean the sensor, turn off power to the furnace at the breaker box. Then, if possible, remove the sensor from the furnace. Scrub the sensor gently to remove dust and other residues. Finally, reattach the sensor and resume power to the furnace.
If you have an older furnace with a standing pilot light, it’s possible that the pilot light has been extinguished. First, confirm that the light is out. Then, turn the gas valve to the off position and wait five minutes. If there is a reset button on your furnace, turn the valve to the pilot position and hold a flame to the dedicated pilot opening while pushing the button for about 30 seconds. (If the pilot doesn’t light on the first attempt, wait a few minutes and repeat the procedure, this time depressing the reset button for 45-60 seconds.) Once the pilot is lit, turn the gas valve back to the on position. If the pilot light won’t stay lit, it’s possible that there is an issue with the thermocouple or ignition system. Call an HVAC professional for assistance.

Finally, don't underestimate the thermostat as a potential reason why your furnace is not working. Everything on the heating unit itself may function perfectly, but your home still will not heat right if the console you use to set the temperature doesn't communicate your input. A faulty thermostat can either be due to the wall unit itself, or the wiring that connects it to your furnace. Average thermostat repair costs are between $108 and $282, including labor. Replacement costs, of course, depend on the thermostat you choose. Visit our thermostat repair cost guide to learn more about this type of issue.


Tyler M came to my house today to clean the furnace fan and motor, and to check the furnace efficiency. He arrived on time, did a great job on the furnace. The fan was really dirty and did more work than was requested as a courtesy - and still charged the quoted price. Tyler was friendly, courteous, very knowledgeable, and was very efficient in completing the work. I would definitely recommend Tyler M and Swan plumbing and Heating for excellent work at a very reasonable price.
All of our AC repair technicians and teams at our HVAC and air conditioning company in Gloucester County are extremely knowledgeable, dependable, helpful and just like members of the family. This family atmosphere helps us provide our valued customers in the towns of Haddonfield, Sewell, and all of South Jersey with top-notch service, because everyone here takes great pride in their work.
Zach came early, which I very much appreciated, and got the job done quickly. He was unfailingly polite and took care with putting on the booties and keeping my carpet clean. He managed to get the sprinkler system turned off even though I was quite uninformed about it and could help very little beyond pointing to where things were. I am always happy to have Brothers people come out to do my plumbing, heating, & electric services.
A pinging or popping sound coming from the duct work can come from thermal expansion—the ductwork expanding and contracting as it heats and cools.  Or, air blowing past a loose flap of metal can make the sound. Track along the duct runs, listening for the sound. If you locate it, make a small dent in the sheet metal to provide a more rigid surface that’s less likely to move as it heats and cools.

24HR Home Comfort Services, is a Wisconsin and Illinois Heating, Cooling, Air Conditioning, Geothermal Heat Pump, and furnace repair, service, replacement and maintenance Company located in Rock County WI and McHenry County IL. 24HR Home Comfort Services employs only the best technicians for air conditioner repair and, furnace repair as well as all air conditioner replacement, furnace replacement and boiler replacement in Afton WI, Avalon WI, Beloit WI, Brodhead WI, Brooklyn WI, Burlington WI, Cambridge WI, Clinton WI, Darien WI, Delavan WI, Dousman WI, Eagle WI, East Troy WI, Edgerton WI, Elkhorn WI, Evansville WI, Fontana WI, Footville WI, Fort Atkinson WI, Hanover WI, Janesville WI, Jefferson WI, Johnson Creek WI, Lake Geneva WI, Lake Mills WI, Lyons WI, Madison WI, Marshall WI, McFarland WI, Milton WI, Mukwonago WI, North Prairie WI, Oconomowoc WI, Oregon WI, Orfordville WI, Palmyra WI, Rockton WI, Roscoe WI, Sharon WI, South Beloit WI, Stoughton WI, Sullivan WI, Sun Prairie WI, Walworth WI, Watertown WI, Watertown WI, Whitewater WI, and Williams Bay WI. A good heating and air conditioning repair or service company near you. To set-up a repair service estimate or replacement estimate, call (608) 868-6412. 24HR Home Comfort Services services all furnace, AC, humidifier, filter, thermostat and water heater brands including Carrier, Bryant, Payne, Trane, Lennox, Rheem, Ruud, Amana, Crown, Frigidaire, Gibson, Goodman, Lochinvar, Maytag, Weil McLain, A O Smith, Kohler, American Standard, GeoExcel, General, Aprilaire, Honeywell, White Rodgers, Dynamic and Skuttle.
There’s a common misconception that you can save money by shutting the vents (supply registers) in rooms that aren’t being utilized. Resist the urge to close too many, as doing so can actually increase the pressure in your furnace, making it work harder to heat your home. This can lead to failed blower motors, mold or mildew in your ductwork, damage to the compressor, a cracked heat exchanger, and other problems. What Does a Furnace Tune-Up Include?
Though Houston heating isn’t a well-known issue, there are occasions when repairing a broken furnace is absolutely necessary. When you need heating system repair, installation, or maintenance, Abacus Plumbing will be able to help you with all your heating repair needs. We’ve been in the heating business for years and because of our HVAC expertise, our professionalism, and excellent customer service, our customers call us the best heating repair company in Houston!

If you’re looking for a professional heating company in Denver with the proper experience to handle your project, our crew has many years of training and experience on most major heating systems available in the Denver area. Our heating company in Denver understands that in some situations, the scope of the damage may put the units beyond repair. In this instance, we can offer you help finding the right energy efficient model that will provide you warmth and savings in your wallet. Heating in Denver can be expensive during the coldest time of year, so choosing the right heating system can give the same amount of heat while at the same time providing big savings when our Denver heater repair technicians help you pick the right system for your home.
Like all mechanical systems, your heat pump or gas furnace might run into trouble eventually. Stay alert to any sudden changes in the way that your furnace operates, such as loud or strange sounds as well as a spike in your energy bills. Our Federal Way heating repair technicians can restore the functionality and efficiency of your furnace in no time.
The team at Steel T Heating & Air Conditioning is highly qualified, knowledgeable, and efficient when it comes to indoor air quality solutions in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO. The quality of your indoor air can have a significant impact on your health, energy bills, and comfort. We offer air filters, air purifiers, and humidifiers based on your specific needs and desires. As a Carrier Factory Authorized Dealer, we are able to provide superior products, as well as installation, maintenance, and repair services. With reliable service and air quality systems, you’ll be able to enjoy your home while also saving money and improving your health. Give us a call today to learn more and we’ll help you determine the best system for you!
Whether you are in need of new installation, system replacement, seasonal maintenance, or prompt repair, M and M, Heating & Cooling, Plumbing & Electrical lives up to your highest expectations for quality, pricing, reliability, and quick turnaround on all projects.  And our commitment isn’t limited to regular business hours.  We’re always available when you need us, providing 24 hour Emergency Service across Longmont, Dacono, Frederick, Firestone, Mead, Erie & Johnstown, CO.  Trust the #1 Rated and Certified – A/C, Heating, and Plumbing Experts.
Air filtration systems work by trapping contaminant particles on a medium such as fiberglass. While your forced–air system already has one or more air filters, those are designed to protect the system components from particles, rather than remove them from your indoor air. We not only install air filtration systems in Federal Way; we also repair and maintain them as necessary.
The motor belt should be firm, giving no more than ½ inch when pressed. It should also be free of cracks and damage. To remove the belt, you will need a wrench and a replacement belt. Loosen, do not remove, the motor bolts. You only need them loose enough to move the motor and slacken the belt. Remove the belt and inspect it, replacing it with a new one if necessary. Belt: $4.00 to $6.00.
If your furnace’s motor runs but the blower doesn’t move air, the belt that connects the two probably has broken. Replacing it is an easy fix. First, turn off all power to the unit and turn off the gas at the gas valve that serves the furnace. Remove the door on the front of the furnace cabinet to give you access to the blower (it might be on a slide-out drawer.) Check the number stamped on the belt and get an exact replacement from a home center or heating supply outlet.
×