No one wants to be stuck in the dead of summer with a broken air conditioner, or in the cold of winter with a broken furnace or boiler. That’s why we’re available any time of day to make your emergency heating and air conditioning repair and get your system up and running as quickly as possible. We’ll show up on time, in uniform and ready to make your HVAC repair right the first time.
As you decide, insist that the contractor select models in a range of efficiencies and calculate the annual estimated operating cost of each model you're considering, rather than simply estimating it. The contractor can complete those calculations by plugging information on each unit's AFUE and electrical consumption, local utility rates, and characteristics of your home into one of several computer programs designed to easily calculate estimates. Make sure that the quotes also include the cost of any changes to venting required by any appliances in the home.
If those steps don't work, call a heating contractor. Despite the improved efficiency of most new furnaces, it's generally more cost-effective to repair a furnace than to replace it. However, if a key component such as the heat exchanger or control module fails, you're probably better off replacing the furnace, especially if the unit is more than about 15 years old. Furnaces typically last an average of 15 to 18 years.

As the largest heating company in the Northwest, Washington Energy Services has fixed thousands of heating systems. We service most major brands of heating equipment, including York, Bryant, Carrier, Lennox, Coleman and Rheem. Our NATE certified, factory trained service technicians are standing by for furnace service, and also heat pump and air conditioning repair. Home owners from Sea-Tac to Lynnwood trust Washington Energy Services for furnace service and repair. Schedule your service today!
I really appreciated the great same-day service provided by Chris H, Swan Plumbing & Heating's technician today. I made an appointment to get an estimate on the water heater replacement, and expected to make another appointment for the installation. But Chris came prepared with all the equipment needed, and replaced our leaking water heater in a very efficient manner within about 2 hours.
Moncrief provides a wide range of services from high-quality energy-efficient systems, tune-ups and inspections, as well as repairs in the Roswell and Marietta areas. As a full-service heating and cooling company, we stay up-to-date on the most economical and energy-efficient systems available for your home or business. In addition, our technicians are well-trained in a wide range of systems to provide quality and cost-efficient furnace service, repairs and installation.
First, check to be sure that your thermostat is set to “heat” and not “cool,” and ensure that the fan is set to “auto.” Then, check to be sure that the thermostat is set to a temperature high enough to trigger the furnace to emit heat. If your thermostat is properly set, ensure that it is getting power — check batteries, fuses and circuit breakers — and ensure that the interior components are clean. Dust and debris inside the thermostat can cause it to malfunction. Fortunately, this is usually an easy fix. In some cases, a malfunctioning thermostat may require adjustment or replacement.  
At Steel T Heating & Air Conditioning, we know how frustrating it can be when you have to invest large amounts of money in your HVAC systems. We always have your best interests in mind, so we provide flexible financing options, with approved credit, from Wells Fargo Financial National Bank. You’ll enjoy benefits such as convenient monthly payments, special financing terms, and easy online account management. Apply today or give us a call for more information!
Denver residents are encouraged to contact Brothers Plumbing, Heating and Electric when in need of fast repairs. If the house feels cold, it could be because the heating system is malfunctioning. When you give us a call, a Denver furnace repair expert will be at your aid right away for a complete diagnosis. We will always attempt to fix the furnace before considering a replacement. However, if the furnace cannot be repaired our Denver furnace repair experts will help you determine the best new furnace.
When you trust your winter comfort to Edwards Heating & Air, we answer with state-of-the-art technology, NATE-certified technicians, and prompt action.  As a Carrier Factory Authorized Dealer, we specialize in the most proven and sophisticated solutions to home and commercial temperature control.  Through ongoing factory training and strict installation and service procedures, the team from Edwards Heating & Air delivers superior workmanship and superior results.  We ensure your demands for efficiency, reliability, and consistent heating are met, and your expectations for courteous and skilled service are exceeded.  Whether you are in the process of building your dream home, in need of effective heating for your existing home or business, or upgrading your furnace or heat pump, our installation specialists provide informed recommendations, attention to detail, and quick turnaround on your project.  Serving Acworth and the surrounding areas of Acworth, Alpharetta, Cummings, Cartersville, Kennesaw & Woodstock, GA since 2001, you can count on Edwards Heating & Air for everything from installation and maintenance to emergency repairs.

Let us take care of your water heater replacement in Federal Way, WA so that the job is done correctly the first time. We can make sure that your home has exactly what it needs for bountiful hot water. We offer a number of different makes and models to replace your old one, and we can ensure that it integrates seamlessly with the rest of your plumbing. Call Bob’s Heating & Air Conditioning today.
When summer finally arrives in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO, a reliable cooling system lets you truly enjoy the beautiful weather.  The heat, insects, humidity, and noise pollution are left outside, while perfect temperatures are maintained inside.  Steel T Heating & Air Conditioning offers precise climate control, unmatched energy efficiency, and a cleaner, healthier home through the installation of state-of-the-art central air conditioners, heat pumps, and ductless mini split options.  With skilled installation, system replacement, seasonal maintenance, and prompt AC repair, we optimize the performance of your cooling equipment and ensure reliability.  As a Carrier Factory Authorized Dealer, our NATE-certified air conditioning technicians are held to strict training standards, and protect your investment through a higher level of expertise.  Rest assured, we are on-call to provide Emergency Service 24 hours a day, 7 days a week, and all projects are completed promptly, accurately, and to your satisfaction.  Contact us for AC service in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO.
When our Denver heating company provides you with maintenance checks before the cold of winter sets in, you will be saving money in several different ways. One of the benefits of a maintenance plan is our technicians will be less likely to have to make repairs throughout the year as long as the system is properly maintained. Our Denver heating company will have your system running at its most efficient, helping to reduce your utility bills each month. An added benefit of a more efficiently running system is the positive environmental effect that it will have.
You'll find we take our job seriously and value highly the trust that is placed in us. To understand why we go so far beyond what others do by investing in the extra training and equipment we believe necessary to protect your home and family properly, take a moment to view our short 30 second video that best explains "why we do it"...and "why it matters."
If your furnace’s motor runs but the blower doesn’t move air, the belt that connects the two probably has broken. Replacing it is an easy fix. First, turn off all power to the unit and turn off the gas at the gas valve that serves the furnace. Remove the door on the front of the furnace cabinet to give you access to the blower (it might be on a slide-out drawer.) Check the number stamped on the belt and get an exact replacement from a home center or heating supply outlet.
You might guess it from the name: the heat exchanger is the part of your furnace that actually heats the air your blower motor pushes through the furnace. It consists of a chamber in which the heat energy produced by natural or propane gas is transferred to the forced air. At the same time, this part also includes a vent through which the gases themselves are safely removed from the unit and the air that enters your home. Because of these gases, a problem with your heat exchanger needs to be dealt with promptly. Over time, cracks in the exchanger can result in carbon monoxide leaks. Taking care of the problem once again means understanding the existence of a range: repairing your heat exchanger can cost as little as $100, but a full replacement may cost up to $1,200.

The main purpose of your furnace filter is to ensure that none of the additional materials your fans pull back into the unit - such as hair and dust - actually damage the furnace or its parts. In the process, it also improves air quality in your home. Some annual inspections will include changing and cleaning this part of the unit. That said, you can also clean or change your furnace filteryourself. Costs for new filters range based on brand, but tend to be around $30.
If you’re looking for a professional heating company in Denver with the proper experience to handle your project, our crew has many years of training and experience on most major heating systems available in the Denver area. Our heating company in Denver understands that in some situations, the scope of the damage may put the units beyond repair. In this instance, we can offer you help finding the right energy efficient model that will provide you warmth and savings in your wallet. Heating in Denver can be expensive during the coldest time of year, so choosing the right heating system can give the same amount of heat while at the same time providing big savings when our Denver heater repair technicians help you pick the right system for your home.

Zach came early, which I very much appreciated, and got the job done quickly. He was unfailingly polite and took care with putting on the booties and keeping my carpet clean. He managed to get the sprinkler system turned off even though I was quite uninformed about it and could help very little beyond pointing to where things were. I am always happy to have Brothers people come out to do my plumbing, heating, & electric services.
Before rushing into pricey HVAC services, turn to the trusted team of technicians at Steel T Heating & Air Conditioning. We’ll gladly provide free estimates on new HVAC system installations across Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO, and we’ll never try to sell you something you don’t need. From start to finish, we offer superior customer service and ensure you’re satisfied. To learn more or to request a free estimate today, give us a call!

Our company’s strength lies in our years of experience performing air conditioning and heating repair in Voorhees, Sewell, Haddonfield, and other towns in and around South Jersey. We also take pride in the high standard we set for the quality of our AC repair and work, and our unfaltering dedication to our customers located in Haddonfield, Sewell, and other parts of Jersey. For three generations we have kept these ideals at the forefront of our operations, allowing us to continue to be one of Southern New Jersey’s leading HVAC Contractors and air conditioner companies.
BGE HOME HVAC repair technicians are thoroughly trained and certified to work on all major brands of heating and air conditioning equipment. When your system breaks down and needs a heating and air conditioning repair, you want to call someone you can trust. Need air conditioning service in the middle of the night? Emergency heating and cooling HVAC service is available 24 hours a day by calling 888-243-4663.
To keep your furnace in good working order it’s important to have it regularly cleaned. The national average furnace cleaning cost ranges from $60 to $80, though prices can vary greatly based on where you live in the country and what your furnace maintenance includes. An HVAC company may have different rates for different levels of furnace maintenance. For example,one company may offer general furnace maintenance for $79 and advanced maintenance for $138. Another company may offer a 38-point maintenance check for $89 and a 64-point maintenance check for $178. According to Energy.gov, a standard furnace cleaning and maintenance visit can include:
An improperly maintained heating and air conditioning is an inefficient heating and air conditioning system. That’s why we provide appointments for annual inspections with our licensed technicians. It’s our goal to make sure that your home is as comfortable and energy-efficient as possible. For inspections, repairs, and service, contact BGE HOME for quality service.

I really appreciated the great same-day service provided by Chris H, Swan Plumbing & Heating's technician today. I made an appointment to get an estimate on the water heater replacement, and expected to make another appointment for the installation. But Chris came prepared with all the equipment needed, and replaced our leaking water heater in a very efficient manner within about 2 hours.
Your furnace's flame sensor is essentially a safety mechanism. As a thin metallic rod in front of the flame inside the unit, it's sole purpose is to confirm that your gas valves only open when a flame actually exists to burn that gas. When the flame sensor stop working, on the other hand, gas leaks can occur. To repair your furnace's flame sensor, expect to spend between $80 and $250. Even a full replacement of this part typically does not go above that range.

An improperly maintained heating and air conditioning is an inefficient heating and air conditioning system. That’s why we provide appointments for annual inspections with our licensed technicians. It’s our goal to make sure that your home is as comfortable and energy-efficient as possible. For inspections, repairs, and service, contact BGE HOME for quality service.
We also offer a great selection of electric furnaces in Seattle, WA. While natural gas does tend to cost less to purchase than electricity, today’s electric furnace models are so efficient that they can really close the price gasp. Call our Seattle furnace experts if you are interested in learning more about the benefits of heating your home with an electric furnace.
If your furnace has a pilot light, look for the flame. Check your owner’s manual or the instructions posted inside the furnace cabinet for step-by-step lighting instructions. Usually this involves first turning the gas valve to Off and waiting a couple of minutes. Then you turn it to Pilot. Next, press and hold it down while you light the flame. Last, wait a minute or so, release it, and then turn it to On.
×