Residents of Federal Way, WA know how important a reliable furnace is when fall and winter arrive. At Bob’s Heating & Air Conditioning, we offer a quality heating systems & service that can handle any heating need you might have. From the installation of new furnaces and heat pumps to the replacement of old models that no longer work properly, our Federal Way heating system specialists can keep you warm during the heating season.
If you’re looking for a professional heating company in Denver with the proper experience to handle your project, our crew has many years of training and experience on most major heating systems available in the Denver area. Our heating company in Denver understands that in some situations, the scope of the damage may put the units beyond repair. In this instance, we can offer you help finding the right energy efficient model that will provide you warmth and savings in your wallet. Heating in Denver can be expensive during the coldest time of year, so choosing the right heating system can give the same amount of heat while at the same time providing big savings when our Denver heater repair technicians help you pick the right system for your home.
Wife and I bought a fixer-upper last year. One of the issues it had was a lack of heating for the house. I called Affordable Furnace Repair and they sent Don out. He checked on the furnace and found one of the heating elements had gone bad. He fixed it quickly and we had a warm winter. Plus we got a box of filters for cheap from him, all around good service.

I met the owner while looking at a new house, he was servicing the furnace. I asked for a card and explained that I live in a townhome, he said not a problem. Well I called a day or so late to schedule an appointment. That went smooth due to the season the schedule was 3-4 weeks out. I understand and wait patiently. Week the day before the scheduled service i got a reminder call, those are helpful. Well the gal on the phone calls back a few minutes later she called back and came up with a few excuses on why they can no longer come look at my furnace. They seemed pretty hollow to me and she took a fairly snippy attitude with me as well. Due to hire this went down and the fact that it took a month for them to say no can do, I will never ever pay a positive wire forward towards this company!
If those steps don't work, call a heating contractor. Despite the improved efficiency of most new furnaces, it's generally more cost-effective to repair a furnace than to replace it. However, if a key component such as the heat exchanger or control module fails, you're probably better off replacing the furnace, especially if the unit is more than about 15 years old. Furnaces typically last an average of 15 to 18 years.
Are you in the market for a new furnace? Do you find it difficult to narrow down your options? We offer professional heating installation in Federal Way, WA that can outfit your home with a heating system in no time. Our Federal Way heating installation technicians are skilled at helping each customer select a furnace that not only works for their budget, but also for their living space.
In December of 2004 Greenwood was sold again to Michael Porter, this time going back to its Puget Sound roots… owned by a local Seattle resident. Michael Porter, a West Seattle resident and a life-long Seattle native. He is committed to complete customer satisfaction and has a mission to be ‘The Most Trusted HVAC Company in the Puget Sound area’. To become the best heating contractor in Seattle and the Eastside he knows he must be able to provide the Highest Quality and most energy efficient Air Conditioning and Heating products on the market. But there is so much more to being the best. Greenwood Heating is also your local expert when it comes to endless hot water systems, they are also your Indoor Air Quality experts with a full product line of air cleaning products.
At Welzig Heating & Air, we focus on quality.  Recognizing that a cut corner today results in long-term problems and expense, we adhere to strict procedures for service and installation, and recommend only premier products.  While we provide affordable solutions to indoor comfort, we refuse to compromise integrity with subpar equipment, materials, or workmanship.  If you’re looking for residential or commercial heating, cooling, air quality, or water heating services of a higher caliber, Welzig Heating & Air delivers satisfaction across Boulder, CO & Surrounding Areas.  Contact us at 303-678-5576 anytime you need us.  Our dedicated technicians are on-call, ready to handle any challenge, 24 hours a day, 365 days a year.

By combining immediate results with sustainable performance, we protect the value of your investment.  We provide skilled installation, maintenance, and repair of gas furnaces, heat pumps, dual fuel systems, boilers, air conditioners, air quality products, traditional and tankless water heaters, and advanced duct cleaning services.  Welzig Heating & Air is the right choice for  the comfort, safety, and health of homes or offices across Boulder, Longmont, Louisville, Lafayette, CO & more.
To be sure of correct sizing and a proper installation, choose a reputable contractor who will take the time to calculate your heating needs according to an industry standard such as in "Manual J HVAC Residential Load Calculation" of the Air Conditioning Contractors of America. Such calculations take into account the climate and the size, design, and construction of your house. Once the furnace is installed, maintain it regularly according to the manufacturer's recommendations. Our survey helped to confirm this advice. When we asked about the most common reasons for service calls for furnaces, contractors cited human error, inadequate maintenance, for example, or improper installation, twice as often as defective equipment. Read our frequency of repair report for which brands or the most and least reliable.
When you contract with Vredevoogd Heating & Cooling Grand Rapids MI, you can count on us to make safety our top priority. Your HVAC system is, of course, a major investment and integral to the functioning of your home; however, nothing is as important as the safety of each life within your home. We carefully inspect your system to ensure that it is functioning properly in order to guard against carbon monoxide poisoning or other system emergencies. We take the greatest care when installing your HVAC system, knowing that a perfect installation is the safest installation for your home. We follow our industry’s best practices concerning safety and will happily share our know how with you when it comes to safely maintaining your system between service appointments.  If you ever suspect a problem with your HVAC system, you hear strange noises or smell unpleasant odors, for instance, you can call us night or day, 24/7, to address your heating and cooling emergency. We’ll never leave you in the lurch! We are ready to provide service ASAP to ensure the safe operation of your HVAC system.

Keeping too many heat registers closed can cause heat to build up in your furnace, forcing air out of duct leaks and requiring the blowers to compensate for the added pressure. Essentially, blocking heating vents causes your furnace to work harder and longer than it is intended to work. Further, it forces air pressure to build up in your air ducts, which may both cause and worsens airflow leaks — particularly at joints and seams. Pros recommend keeping at least 80 percent of your heating registers open to prevent unnecessary air from building up in your furnace.
Partly to avoid that possibility, the furnaces in most homes are larger than necessary. Initial cost is only one of the drawbacks of that strategy. A furnace that's too large will cycle on and off more frequently. That puts more wear on its components, wastes energy, and might cause the temperature to vary uncomfortably. Also, a larger replacement furnace might require larger ducts. Without the right size ducts, airflow can be noisy.
Partly to avoid that possibility, the furnaces in most homes are larger than necessary. Initial cost is only one of the drawbacks of that strategy. A furnace that's too large will cycle on and off more frequently. That puts more wear on its components, wastes energy, and might cause the temperature to vary uncomfortably. Also, a larger replacement furnace might require larger ducts. Without the right size ducts, airflow can be noisy.
CM Heating performed a Gas Furnace Diagnostic. Customer wanted his echo bee thermastat installed that he had bought himself. Furnace was working fine just wanted his thermastat installed. He thought that the $99 service fee was going to cover that but explained to him what the service fee was for, and explained that there is a additional install fee for the stat. Customer didn’t want to pay the additional fee so I called the office had them listen to the call to make sure we explained to the customer correctly and to see how they would like me to proceed. So I quoted the customer the fee to install the thermostat but he didn’t want us to install it so I left.

Thank you, thank you, thank you for sharing your knowledge. I just replaced our shower cartridge and our leak is FIXED!!!!!!! Your instructional was clear and concise. I did purchase 2 cartridges first, because I did not know the type it was and could not pull it out without the plastic cover it comes with. Fortunately, it was one of the two. By the way I'm a 63 year old woman. If I can do it, anyone with internet and a little patience and an hour can do it.....
When you work with Bob’s, we make sure your furnace is properly sized and installed for optimal performance. When it comes to furnace installation in Renton, WA, Bob’s is dedicated to excellence, which defines our service. We know that professional furnace installation is the best way to protect its performance quality. Call today for more details.
In order to make your everyday life easier and more enjoyable, Sky Heating & Air Conditioning specializes in state-of-the-art heating and cooling technology, partnering with Trane, Mitsubishi, and Waterfurnace.  We bring you HVAC solutions that represent the best the industry has to offer, ensuring long-term performance and satisfaction.  Whether you’re looking for the design/build of a new system, replacement, or hoping to cut costs and enhance convenience, we answer with proven products.  Our qualified HVAC technicians help you determine the ideal solution for your exact requirements, and make sure you’re happy with every step of the process.  From ductless HVAC to geothermal heating and cooling systems, we offer a wide selection of options and comprehensive services to answer any type of challenge.  Call on Sky Heating & Air Conditioning and let us exceed your expectations today!
Environmental Protection Agency (EPA) has selected Sears Home Services as a 2018 ENERGY STAR Partner of the Year winner for Sustained Excellence — Retailer and Energy Management. This award is reserved for ENERGY STAR partners demonstrating outstanding leadership and exceptional commitment to the environment by providing consumers with products, services and information that help individuals make sustainable purchasing decisions.
Here at Four Seasons Heating and Air Conditioning, we understand that the toughest aspects of winter weather can sometimes be too much for any furnace. That’s why we offer year-round, same-day furnace maintenance to ensure that your home and family never freeze. With no additional charge for after-hours service, you’ll soon discover that Four Seasons Heating and Air Conditioning is the affordable, expert service your home needs and deserves.

To keep your furnace in good working order it’s important to have it regularly cleaned. The national average furnace cleaning cost ranges from $60 to $80, though prices can vary greatly based on where you live in the country and what your furnace maintenance includes. An HVAC company may have different rates for different levels of furnace maintenance. For example,one company may offer general furnace maintenance for $79 and advanced maintenance for $138. Another company may offer a 38-point maintenance check for $89 and a 64-point maintenance check for $178. According to Energy.gov, a standard furnace cleaning and maintenance visit can include:


Maryville, TN appliance repair Brookfield, WI appliance repair Appliance repair Santa Cruz, CA Appliance repair Riverside Appliance repair Naples, FL 1500 S Willow St appliance repairs Appliance repair in La Crosse Appliance repair in Laredo 200 Westgate Dr appliance repairs 6929 Williams Rd appliance repairs Appliance repair in Chesapeake Home Services - Sears Maid Services Appliance repair in Springfield, OH Appliance repair in Whittier Appliance repair in Massena Appliance repair in Duluth Repair Service for Home Theater Appliance repair in Richardson How to Prepare Your Lawn & Garden for Spring in 6 Simple Steps Appliance repair in Saint Joseph
Any forced air system in your home - whether it is powered through electric or gas-generated energy - requires a blower motor. This component consists of an electric motor and fan, and is responsible for pushing air evenly through the furnace. As hvac.com points out, you can easily identify the blower motor in your furnace as the part that looks similar to a hamster wheel at the bottom of the unit. If it stops working, the air needed to heat your home will no longer be pushed through the furnace to be heated and distributed evenly. In that case, you need to inquire about potential repairs. Blower motor repair typically costs between $150 for a simple fix, and $450 for complete replacement and installation of the part. Where you land on that range depends on the exact damage.
You might guess it from the name: the heat exchanger is the part of your furnace that actually heats the air your blower motor pushes through the furnace. It consists of a chamber in which the heat energy produced by natural or propane gas is transferred to the forced air. At the same time, this part also includes a vent through which the gases themselves are safely removed from the unit and the air that enters your home. Because of these gases, a problem with your heat exchanger needs to be dealt with promptly. Over time, cracks in the exchanger can result in carbon monoxide leaks. Taking care of the problem once again means understanding the existence of a range: repairing your heat exchanger can cost as little as $100, but a full replacement may cost up to $1,200.
To make sure the unit you select is the right size for your home, the Sears HVAC expert does an electronic load calculation estimate to determine the exact type of heat and air conditioning system that’s just right for your home–we don’t just replace it with the same size unit you currently have. These calculations take into consideration things such as the size of your home, its exposure to the sun and wind, the number and size of windows, how well insulated it is and more. This step is essential so the unit isn’t too small or too large–both waste energy.
As you decide, insist that the contractor select models in a range of efficiencies and calculate the annual estimated operating cost of each model you're considering, rather than simply estimating it. The contractor can complete those calculations by plugging information on each unit's AFUE and electrical consumption, local utility rates, and characteristics of your home into one of several computer programs designed to easily calculate estimates. Make sure that the quotes also include the cost of any changes to venting required by any appliances in the home.
If those steps don't work, call a heating contractor. Despite the improved efficiency of most new furnaces, it's generally more cost-effective to repair a furnace than to replace it. However, if a key component such as the heat exchanger or control module fails, you're probably better off replacing the furnace, especially if the unit is more than about 15 years old. Furnaces typically last an average of 15 to 18 years.

Furnace replacement in Denver is necessary if your furnace is broken beyond repair or if it is more than 15 years old. Old furnaces are very inefficient (they use more power and gas than newer ones) and they can even be very hazardous to your health and home. Furnaces are controlled fires, and when the control systems for said fires are out of date or malfunctioning, the safety and wellbeing of your home are in jeopardy. So if you have an old or malfunctioning heater, then give our furnace replacement company a call today.
×