Next check and clean the furnace’s flame sensor. The video below shows you how—note that this guy fixes it in about 5 minutes. We would probably use a little bit of emory paper, but he cleans the sensor with a 5-dollar bill. Another video further down the page under the discussion of “If your furnace keeps shutting off after about 5 minutes” shows the same project with a different brand of furnace.
Moreover, our HVAC technicians also offer professional heating repair and maintenance as part of our heating systems service in Federal Way, WA. Whether you find yourself with insufficient heat or a high energy bill, it’s worth keeping a close watch on your heating system, whether you have a furnace or a heat pump. We can keep your heating system in good shape with maintenance.
As a Bryant Factory Authorized Dealer, Welzig Heating & Air consistently performs to strenuous standards of technical competence, business ethics, and customer approval.  Our team is NATE-certified, factory trained and regularly updated in progressive technology.  Equipped with leading edge equipment, tools, and a full inventory of genuine manufacturer’s replacement parts, we properly size and install new systems, accurately diagnose existing systems, and resolve the majority of issues right then and there.
Tyson from Brothers was courteous, efficient and familiar with the system, because he had worked with it before. He arrived early within the time window and was professional, fast and made it possible for me to happily spend my day doing other things rather than devoting all day to the sprinkler turn off procedure and worrying if the job had been done properly.
Drilon and Jeremy came out to the house for snaking the sewage line and performing an AC tune up. They were very informative, kind, respectful and professional. Drilon went above and beyond by giving me a whole walk through on our furnace, AC unit and water heater and giving suggestions and prioritizing what he thought would be the most important and safe for our new house right now. They were not pushy with their sales tactics and I will definitely be using them when we are ready to replace our features.
If your furnace has a pilot light, look for the flame. Check your owner’s manual or the instructions posted inside the furnace cabinet for step-by-step lighting instructions. Usually this involves first turning the gas valve to Off and waiting a couple of minutes. Then you turn it to Pilot. Next, press and hold it down while you light the flame. Last, wait a minute or so, release it, and then turn it to On.
CM Heating performed a Gas Furnace Diagnostic. Customer wanted his echo bee thermastat installed that he had bought himself. Furnace was working fine just wanted his thermastat installed. He thought that the $99 service fee was going to cover that but explained to him what the service fee was for, and explained that there is a additional install fee for the stat. Customer didn’t want to pay the additional fee so I called the office had them listen to the call to make sure we explained to the customer correctly and to see how they would like me to proceed. So I quoted the customer the fee to install the thermostat but he didn’t want us to install it so I left.

At Welzig Heating & Air, we focus on quality.  Recognizing that a cut corner today results in long-term problems and expense, we adhere to strict procedures for service and installation, and recommend only premier products.  While we provide affordable solutions to indoor comfort, we refuse to compromise integrity with subpar equipment, materials, or workmanship.  If you’re looking for residential or commercial heating, cooling, air quality, or water heating services of a higher caliber, Welzig Heating & Air delivers satisfaction across Boulder, CO & Surrounding Areas.  Contact us at 303-678-5576 anytime you need us.  Our dedicated technicians are on-call, ready to handle any challenge, 24 hours a day, 365 days a year.


Sky Heating & Air Conditioning provides a wide range of quality HVAC services to homeowners across Portland and The Dalles.  By bringing together skilled technicians and premier products, we deliver superior value for your investment.  We utilize tried and true strategies to enhance efficiency, comfort, and convenience throughout your home.  For heating and air conditioning installation, repair, and regular maintenance, no one takes better care of you than Sky Heating & Air Conditioning.  And we’re always here!  Count on us 24 hours a day, 7 days a week, to protect your safety, comfort, and best interests.
As your trusted furnace maintenance company, we offer local service no matter where you live. We’ll have one of our professionally trained and certified technicians out to your home within two hours of your call. Best of all, it doesn’t matter whether you purchased your furnace with us or not—no matter the make or model of your heater, we can provide the furnace maintenance it needs.  Check out some of the other great benefits of doing business with us:

My furnace thermostat stopped working, and when I called Dehlia answered the phone and set up an appointment. They charged less for a diagnostic call than larger companies. They are actively licensed, bonded and insured. Verne arrived 2 days later, explained what was broken in my 17 year old furnace and gave me an estimate and time of replacement for a new furnace. Dehlia confirmed via email and phone, and Don and Zack showed up as promised on time a week later and replaced my Bryant 90i furnace with a new Rheem 96% efficient 2 stage Variable speed 85,000btu gas furnace Model #R96VA0852521 and provided me with the paperwork warranty and removed the old one. Cost was $5,394.90 including tax. I gave up on trying to get 2 more estimates because every furnace company wants $125 to $200 to come out to do a diagnostic and this company wanted $75 to come out to look at it although admittedly they just took a look at it and said it was broken and repair would be $2 to $3k and should just get a new  one (this fee was waived when I agreed to buy a new furnace from them). They also said it was possible I could find cheaper installation elsewhere, but I was freezing in December and I just wanted heat and other companies were 2 to 3 weeks out for an appointment.  They were pleasant to chat with as they worked and Don updated a convoluted furnace exhaust piping system. They accept cash and check after a job is finished with no deposit up front and are clear that 3% is added if you pay via credit card.  Overall I am happy with my new furnace although I sure wish I could've replaced it myself to save some money.


We are open from 7am to 10pm every weekday and from 7am to 8pm on weekends. We book appointments in a 2 hour arrival window and call 30-45 mins before we arrive so you do not have to sit around waiting. It is often possible to schedule your appointment in the evening or morning hours to avoid conflicting with your work schedule. Are you looking for service today? Give us a call or click on one of the Schedule Service buttons found on the top and left sides of this page to contact us today.


We tend to have fairly moderate winters in Federal Way, WA, and that means a heat pump works well down here. A heat pump works much like a central air conditioner in that it circulates a refrigerant that transfers thermal energy from one place to another. But heat pumps not only cool your home during the summer, but also heat your home during the winter.
In December of 2004 Greenwood was sold again to Michael Porter, this time going back to its Puget Sound roots… owned by a local Seattle resident. Michael Porter, a West Seattle resident and a life-long Seattle native. He is committed to complete customer satisfaction and has a mission to be ‘The Most Trusted HVAC Company in the Puget Sound area’. To become the best heating contractor in Seattle and the Eastside he knows he must be able to provide the Highest Quality and most energy efficient Air Conditioning and Heating products on the market. But there is so much more to being the best. Greenwood Heating is also your local expert when it comes to endless hot water systems, they are also your Indoor Air Quality experts with a full product line of air cleaning products.

Before rushing into pricey HVAC services, turn to the trusted team of technicians at Steel T Heating & Air Conditioning. We’ll gladly provide free estimates on new HVAC system installations across Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO, and we’ll never try to sell you something you don’t need. From start to finish, we offer superior customer service and ensure you’re satisfied. To learn more or to request a free estimate today, give us a call!
There are a number of reasons that your water heater installation must be completed by a qualified party. First of all, it must be the right size so that it can handle your hot water needs. Plus, only a professional water heater installation in Seattle, WA can ensure that the system operates safely and effectively. Call today to discuss your water heater installation options.
Turn to Ashworth Heating & Cooling for the installation of a standby home generator, along with our HVAC, air quality, and refrigeration services.  We are here to exemplify customer service and resolve any difficulties you may face with prompt scheduling, dedicated job performance, and 24/7 Emergency Repair throughout Hurricane, Huntington, Charleston, South Charleston, St. Albans, Dunbar & Milton, WV.

A-TEMP has been serving the residential heating and air conditioning needs of greater Portland-area homeowners for almost 50 years. We are all about home comfort, just right. So we know how to keep you comfortable all year-round with responsive service, quality products, and well-trained, certified technicians. We offer efficient, best-of-class choices in furnaces, heat pumps, central air conditioning, duct cleaning, service contracts, and more.
There is no debate.  Regular, professional maintenance of all types of heating equipment is absolutely essential to proper performance.  However, not all service is completed correctly.  The value of your investment is directly impacted by the skill and dedication of the contractor who handles seasonal service.  When you trust the experts from Air Blue Heating and Cooling Inc., you benefit from the best of the best.  Our technicians are fully licensed, bonded, insured, and by verifying their knowledge of today’s increasingly advanced heating and cooling systems, have achieved NATE-certification.  We are recognized as a Carrier Factory Authorized Dealer, a distinction that is earned through consistent demonstration of sound business practices, product knowledge, and technical proficiency.
The quality of your heating installation can greatly impact the quality of your overall heating experience. If your system is not carefully selected, sized and installed, there is really just no way that you can hope for it to operate at peak performance and efficiency levels. Never settle for a subpar heating installation when our Seattle heating installation technicians are available to do the job right.
You might guess it from the name: the heat exchanger is the part of your furnace that actually heats the air your blower motor pushes through the furnace. It consists of a chamber in which the heat energy produced by natural or propane gas is transferred to the forced air. At the same time, this part also includes a vent through which the gases themselves are safely removed from the unit and the air that enters your home. Because of these gases, a problem with your heat exchanger needs to be dealt with promptly. Over time, cracks in the exchanger can result in carbon monoxide leaks. Taking care of the problem once again means understanding the existence of a range: repairing your heat exchanger can cost as little as $100, but a full replacement may cost up to $1,200.
The main purpose of your furnace filter is to ensure that none of the additional materials your fans pull back into the unit - such as hair and dust - actually damage the furnace or its parts. In the process, it also improves air quality in your home. Some annual inspections will include changing and cleaning this part of the unit. That said, you can also clean or change your furnace filteryourself. Costs for new filters range based on brand, but tend to be around $30.
Yes. You should expect to pay a diagnostic fee to cover the cost of the technician's visit, the diagnosis of your air conditioner's problem, and a quote for the repair options. You will be advised of the issue along with recommended options to correct it, which may include a system replacement if your unit is old or significantly damaged. If you decide to replace the system, the diagnostic fee will be credited toward your replacement purchase.
Bryant manufactures and markets gas central furnaces that are available in single and multistage configurations, with some models capable of an AFUE rating of more than 90 percent. Bryant markets units that meet Energy Star requirements and makes others that it claims offer quiet operation. A new line of hybrid heat systems that uses gas and an electric heat pump was recently introduced. The average price of a Bryant central gas furnace is about $2,300 and Bryants are sold through their dealer network.
We have done furnace services numerous times for last 10+ years. All that this technician did was to vacuum inside the furnace, asked me to turn on and turn off furnace, and said it is working fine. He didn't clean the burners, didn't check heating effectiveness, didn't check / change the filter ... Total rip off. I am calling amazon customer service.
Walter was stupendous! He installed a new high-efficiency central air and furnace in my house. His master craftsmanship (artistry) and customer service are in a class of their own. From removing the old unit to all of the finishing touches, testing and review of operating the system, every detail was done in excess of what I could have imagine and I'm a Building Inspector. It was a very pleasant experience for me with only good surprises.

Steel T Heating & Air Conditioning is uniquely qualified to recommend and install the industry’s most recognized heating and cooling systems, from central air conditioners and furnaces, to heat pumps, ductless units, and air quality accessories. We offer a range of innovative products to improve the health, comfort, and convenience of your everyday life. Plus, we’ll stand with you throughout the entire product life, offering skilled installation and replacement, seasonal maintenance, and 24 hour repair to maximize the return on your investment. Targeting cost-savings, energy efficiency, reliability, and safety, Steel T Heating & Air Conditioning is your single solution for temperature control. Contact us to day for heating and air conditioning services in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO.
When you hire Steel T Heating & Air Conditioning, know that you’re hiring a business that is fully licensed and insured with certified technicians that receive ongoing training. In order to earn the status of a Carrier Factory Authorized Dealer, our company is held to strict standards for customer satisfaction, product knowledge, technical expertise, and business practices. For five years in a row, we were honored to be selected as a Carrier President’s Award winner. This award identifies Steel T Heating & Air Conditioning as an example of excellence for dealers across the nation to follow. We’re also the only heating and cooling company in the state of Colorado to be inducted into the Carrier Hall of Fame, a distinction that only 25 other dealers in the country can claim. We are extremely proud of the superior service and quality products we offer to homeowners in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO. We never rest on past achievements, but continue to find new ways of earning your business.
The cost of a new furnace might make you balk at first thought, but with modern manufacturers offering an extremely diverse range of options with varying AFUE ratings, optional accessories, and more, there is a furnace to meet any budget! It’s just important that you work with the right service team and experts that will work with you rather than try to “sell” you.
High-efficiency condensing furnaces (90% AFUE and above) are a bit more complex than conventional furnaces. The main differences between a conventional and condensing furnace is the heat exchanger technology used to extract heat from the combustion process and the method used to exhaust the combustion gases. In these ways, the furnaces are very different. The condensing furnace does not have a significantly more efficient combustion process than does a conventional furnace; both use gas burners with electronic ignition. The difference lies in that the condensing furnace has a more efficient heat extraction process after combustion.
×