Inspect your furnace thermostat by first making sure that it’s turned on. Also, ensure that the thermostat switch is turned to “heat” and not “cool”. If your furnace will still not start with the thermostat on, try adjusting the temperature settings to a few degrees higher. Inspect any visible wires for breaks or splits, and make sure your thermostat batteries are not dead. Do not touch any open wires; contact a professional.
If your furnace’s motor runs but the blower doesn’t move air, the belt that connects the two probably has broken. Replacing it is an easy fix. First, turn off all power to the unit and turn off the gas at the gas valve that serves the furnace. Remove the door on the front of the furnace cabinet to give you access to the blower (it might be on a slide-out drawer.) Check the number stamped on the belt and get an exact replacement from a home center or heating supply outlet.
Most manufacturers’ warranties call for annual equipment maintenance to stay valid, so missing your tune-ups can possibly result in losing your heating or AC system warranty, which can be major money if your equipment does ever stop working in the middle of a cold snap. Make sure you get all you can from your warranty by making sure it stays valid as long as possible with annual furnace system tune-ups from Service Experts.
Here at Four Seasons Heating and Air Conditioning, we understand that the toughest aspects of winter weather can sometimes be too much for any furnace. That’s why we offer year-round, same-day furnace maintenance to ensure that your home and family never freeze. With no additional charge for after-hours service, you’ll soon discover that Four Seasons Heating and Air Conditioning is the affordable, expert service your home needs and deserves.
The only way to get the most from your water heater is by having it professional cleaned and inspected from time to time. During the course of its service life, your water heater endures a significant amount of wear and tear, and catching any problems early on in their development is one of the major advantages of professional water heater maintenance in Federal Way, WA.
Tired of dealing with an inoperable furnace? Or, maybe your heating system is only heating half the rooms in your home? Whether you need a new heating system installed or an existing unit repaired, there’s only one name to know—ABC Plumbing, Heating, Cooling & Electric. With more than six decades of experience handling Chicago’s heating problems, our team at ABC has the experience and know-how to get any heating issue diagnosed and resolved quickly and efficiently.
First, check to be sure that your thermostat is set to “heat” and not “cool,” and ensure that the fan is set to “auto.” Then, check to be sure that the thermostat is set to a temperature high enough to trigger the furnace to emit heat. If your thermostat is properly set, ensure that it is getting power — check batteries, fuses and circuit breakers — and ensure that the interior components are clean. Dust and debris inside the thermostat can cause it to malfunction. Fortunately, this is usually an easy fix. In some cases, a malfunctioning thermostat may require adjustment or replacement.  

Cleaning the debris that builds up on your filters will aid with the flow of air. When your air filter is clogged, your air handler must work harder to compensate for the blockage of air flow. In addition to driving up your utility bill, the reduced air flow through your heating and cooling system can cause your heat exchanger to overheat and shut off too quickly.    
×