Dirty furnace filters are one of the most common causes of a furnace failure. A dirty furnace filter can limit the airflow through your furnace and cause it to overheat. If you suspect a dirty air filter, change the filter, press the reset button (if your furnace has one) and see whether your furnace begins to emit heated air. Change your furnace filters regularly — pros recommend changing them once a month — to ensure that your furnace continues to work properly. Unaddressed, dirty furnace filters can cause extensive, and expensive, damage to your home’s heating system.
Thinking about a new water heater? Is yours ready to retire, or are you moving into a new home that doesn’t yet have one? When you call on Bob’s Heating & Air Conditioning, our Federal Way water heater installation technicians can make certain that the installation of your water heater goes according to plan. Our water heater specialists can help find a model that works for your budget.

When it comes to air conditioning installation in Federal Way, WA, you need to make sure that you hire a professional to ensure that the job is done right the first time. Let us take care of every detail. At Bob’s Heating & Air Conditioning, our Federal Way air conditioning installation technicians are highly trained and experienced to handle a number of different system types and brands.

If you’re looking for a professional heating company in Denver with the proper experience to handle your project, our crew has many years of training and experience on most major heating systems available in the Denver area. Our heating company in Denver understands that in some situations, the scope of the damage may put the units beyond repair. In this instance, we can offer you help finding the right energy efficient model that will provide you warmth and savings in your wallet. Heating in Denver can be expensive during the coldest time of year, so choosing the right heating system can give the same amount of heat while at the same time providing big savings when our Denver heater repair technicians help you pick the right system for your home.

A pinging or popping sound coming from the duct work can come from thermal expansion—the ductwork expanding and contracting as it heats and cools.  Or, air blowing past a loose flap of metal can make the sound. Track along the duct runs, listening for the sound. If you locate it, make a small dent in the sheet metal to provide a more rigid surface that’s less likely to move as it heats and cools.
If your furnace has a pilot light, look for the flame. Check your owner’s manual or the instructions posted inside the furnace cabinet for step-by-step lighting instructions. Usually this involves first turning the gas valve to Off and waiting a couple of minutes. Then you turn it to Pilot. Next, press and hold it down while you light the flame. Last, wait a minute or so, release it, and then turn it to On.
Zach came early, which I very much appreciated, and got the job done quickly. He was unfailingly polite and took care with putting on the booties and keeping my carpet clean. He managed to get the sprinkler system turned off even though I was quite uninformed about it and could help very little beyond pointing to where things were. I am always happy to have Brothers people come out to do my plumbing, heating, & electric services.
There will always be an occasion for you to rely on a heating or air conditioning system. The major appliances make comfortable life possible, providing warmth on nippy days and cool air during humid summers. Whether or not you use them daily, however, your heating and air conditioning systems need to be maintained every now and then to ensure that they function properly.
Here at Four Seasons Heating and Air Conditioning, we understand that the toughest aspects of winter weather can sometimes be too much for any furnace. That’s why we offer year-round, same-day furnace maintenance to ensure that your home and family never freeze. With no additional charge for after-hours service, you’ll soon discover that Four Seasons Heating and Air Conditioning is the affordable, expert service your home needs and deserves.
There may come a time when air conditioning repair is not enough. If you find that your air conditioner breaks down irreparably, then you may need to opt for air conditioning replacement service. At Bob’s Heating & Air Conditioning, our Federal Way air conditioning replacement technicians can make certain that you make an informed decision about the status of your AC, whether you have a heat pump or central AC.
When you contract with Vredevoogd Heating & Cooling Grand Rapids MI, you can count on us to make safety our top priority. Your HVAC system is, of course, a major investment and integral to the functioning of your home; however, nothing is as important as the safety of each life within your home. We carefully inspect your system to ensure that it is functioning properly in order to guard against carbon monoxide poisoning or other system emergencies. We take the greatest care when installing your HVAC system, knowing that a perfect installation is the safest installation for your home. We follow our industry’s best practices concerning safety and will happily share our know how with you when it comes to safely maintaining your system between service appointments.  If you ever suspect a problem with your HVAC system, you hear strange noises or smell unpleasant odors, for instance, you can call us night or day, 24/7, to address your heating and cooling emergency. We’ll never leave you in the lurch! We are ready to provide service ASAP to ensure the safe operation of your HVAC system.

With more than 100 years in existence, Lennox has always delivered industry-leading innovation and technology while preserving stringent durability and reliability standards. The professionals at James Heating & A/C, Inc help bring those standards to Lexington so that you can always have total home comfort. If you’re in the market for a new HVAC system or even if you just have a question about what we offer, give us a call at 336-853-6070. We’d love to hear from you. 


Whether you are in need of new installation, system replacement, seasonal maintenance, or prompt repair, M and M, Heating & Cooling, Plumbing & Electrical lives up to your highest expectations for quality, pricing, reliability, and quick turnaround on all projects.  And our commitment isn’t limited to regular business hours.  We’re always available when you need us, providing 24 hour Emergency Service across Longmont, Dacono, Frederick, Firestone, Mead, Erie & Johnstown, CO.  Trust the #1 Rated and Certified – A/C, Heating, and Plumbing Experts.

When you contract with Vredevoogd Heating & Cooling Grand Rapids MI, you can count on us to make safety our top priority. Your HVAC system is, of course, a major investment and integral to the functioning of your home; however, nothing is as important as the safety of each life within your home. We carefully inspect your system to ensure that it is functioning properly in order to guard against carbon monoxide poisoning or other system emergencies. We take the greatest care when installing your HVAC system, knowing that a perfect installation is the safest installation for your home. We follow our industry’s best practices concerning safety and will happily share our know how with you when it comes to safely maintaining your system between service appointments.  If you ever suspect a problem with your HVAC system, you hear strange noises or smell unpleasant odors, for instance, you can call us night or day, 24/7, to address your heating and cooling emergency. We’ll never leave you in the lurch! We are ready to provide service ASAP to ensure the safe operation of your HVAC system.
You might guess it from the name: the heat exchanger is the part of your furnace that actually heats the air your blower motor pushes through the furnace. It consists of a chamber in which the heat energy produced by natural or propane gas is transferred to the forced air. At the same time, this part also includes a vent through which the gases themselves are safely removed from the unit and the air that enters your home. Because of these gases, a problem with your heat exchanger needs to be dealt with promptly. Over time, cracks in the exchanger can result in carbon monoxide leaks. Taking care of the problem once again means understanding the existence of a range: repairing your heat exchanger can cost as little as $100, but a full replacement may cost up to $1,200.
The team at Steel T Heating & Air Conditioning is highly qualified, knowledgeable, and efficient when it comes to indoor air quality solutions in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO. The quality of your indoor air can have a significant impact on your health, energy bills, and comfort. We offer air filters, air purifiers, and humidifiers based on your specific needs and desires. As a Carrier Factory Authorized Dealer, we are able to provide superior products, as well as installation, maintenance, and repair services. With reliable service and air quality systems, you’ll be able to enjoy your home while also saving money and improving your health. Give us a call today to learn more and we’ll help you determine the best system for you!
They did an outstanding work when you long time ago that our old furnace needed to be replaced. We contacted The Right Choice heating and air in one of the wraps came to our house give us a really good price for a new Trane furnace. The next day they arrived on time and finish the jobs within few hours we cleaned after themselves and made sure to ask us if we understand how to operate our new system. I will definitely recommend to use the Right choice heating and air
The cost to replace your gas furnace will vary based on the type and size of furnace you select, labor and installation costs, and any repairs your HVAC system may need. Nationally, average HVAC prices for a heating specialist range between $1,800 and $2,500. It’s important to select the right size gas furnace for your heating needs. A furnace that’s too small won’t heat your house properly, while a furnace that’s too large will run inefficiently, cycling on and off and likely breaking down sooner. HVAC specialists calculate your exact heat needs by measuring your home and incorporating variables such as the regional climate and your home’s level of insulation. Retail pricing for gas furnaces can range from $650 up to $3,000 and more. The higher the AFUE (annual fuel utilization efficiency) rating of the furnace, the more efficient it is at turning fuel into heat and the lower your carbon footprint and utility bill will be. HVAC installation costs are often based on an hourly rate and can range from under $50 to over $100 per hour, depending on the company and the furnace being installed. Higher-end furnaces cost more to install because they require added labor and expertise. For a typical installation, it might take two HVAC installation pros one day or less to remove your old furnace and replace it with a new one.

Bryant has been an industry leader of heating and cooling products for over a century. Innovative Bryant HVAC systems provide dependable solutions to home and commercial comfort and air quality. With everything from heat pumps to gas furnaces and air conditioning systems, Bryant has the products that offer leading-edge technology and precision engineering. Call us today to learn more!


Whether you are looking for gas furnace service or repair, quality installation of a furnace, heat pump or air conditioner, mini split ductless heat pumps, endless hot water from tankless water heaters, better air quality in your home or just a filter change or duct cleaning, Greenwood Heating is your best choice of Seattle heating contractors and cooling specialists.


Turn to Ashworth Heating & Cooling for the installation of a standby home generator, along with our HVAC, air quality, and refrigeration services.  We are here to exemplify customer service and resolve any difficulties you may face with prompt scheduling, dedicated job performance, and 24/7 Emergency Repair throughout Hurricane, Huntington, Charleston, South Charleston, St. Albans, Dunbar & Milton, WV.
Rheem manufactures and markets gas central furnaces that are available in single and multistage configurations, with some models capable of an AFUE rating of more than 90 percent. Some units meet Energy Star requirements. The average price of a Rheem central gas furnace is about $2,300 and Rheems are sold through their dealer network. Rheem products are made by the same manufacturer as Ruud.
Read what our many satisfied customers say about Moncrief. We consistently receive 5-star reviews from both our commercial and residential customers. Moncrief's legacy of comfort and trust, as well as our great team and customer service are second to none. Contact us today to schedule an appointment or inquire about our Total Comfort Service Plan. Moncrief Heating & Air Conditioning is the company to provide the services you need in Roswell and Marietta. Call us at 404-350-2300.
The price of a furnace generally rises in step with its fuel efficiency. A furnace with a 90 percent AFUE might cost $1,000 more than a similar size unit with an 80 percent AFUE. But you can often recoup that additional cost through lower fuel bills over the life of the furnace, especially in regions such as the Northeast and Midwest, where winters can be harsh. How quickly you recover the investment depends on more than just AFUE. The electricity to run furnaces with different AFUEs can vary significantly. The climate where you live, how well your home is insulated, and your local gas and electricity rates also affect payback times.
There will always be an occasion for you to rely on a heating or air conditioning system. The major appliances make comfortable life possible, providing warmth on nippy days and cool air during humid summers. Whether or not you use them daily, however, your heating and air conditioning systems need to be maintained every now and then to ensure that they function properly.
At Steel T Heating & Air Conditioning, we know how frustrating it can be when you have to invest large amounts of money in your HVAC systems. We always have your best interests in mind, so we provide flexible financing options, with approved credit, from Wells Fargo Financial National Bank. You’ll enjoy benefits such as convenient monthly payments, special financing terms, and easy online account management. Apply today or give us a call for more information!

Vredevoogd Heating & Cooling Grand Rapids values each and every customer. Servicing or installing your HVAC system means establishing a service relationship with each homeowner. We promise to earn your trust with our consummate level of professionalism and expert service. We back our work with the strongest industry guarantees because we value your continued business.
Though Houston heating isn’t a well-known issue, there are occasions when repairing a broken furnace is absolutely necessary. When you need heating system repair, installation, or maintenance, Abacus Plumbing will be able to help you with all your heating repair needs. We’ve been in the heating business for years and because of our HVAC expertise, our professionalism, and excellent customer service, our customers call us the best heating repair company in Houston!
Relax—ABC Plumbing, Heating, Cooling & Electric is here for you when you need us most! Our highly trained, background-checked technicians perform heating and air conditioning repairs quickly and efficiently to keep your family warm and cozy all winter long. With over 65 years of experience, you can trust that we’ll fix your furnace correctly the first time.
If your furnace needs to be repaired, you’ll want to find a qualified heating, ventilating and air conditioning (HVAC) repair technician. Each state has its own licensing requirements; some require all HVAC technicians to have an HVAC license, while others only require someone operating an HVAC service and installation company with employees to hold a contractor’s license. For example, in Alabama, the Alabama Board of Heating Air Conditioning, and Refrigeration Contractors regulates licensing, while in Kansas there is no state regulatory body and HVAC licensing can vary by region. For simple furnace repairs like changing out a filter, a trusted handyman can probably handle the job, but a trained professional should be hired for tasks like replacing a gas valve, installing a new inducer fan motor or other critical furnace repair jobs that involve dealing with gas leaks or other dangerous conditions. For more, check out our tips for smart hiring on Thumbtack.
Residents of Federal Way, WA know how important a reliable furnace is when fall and winter arrive. At Bob’s Heating & Air Conditioning, we offer a quality heating systems & service that can handle any heating need you might have. From the installation of new furnaces and heat pumps to the replacement of old models that no longer work properly, our Federal Way heating system specialists can keep you warm during the heating season.
At Steel T Heating & Air Conditioning, we know how frustrating it can be when you have to invest large amounts of money in your HVAC systems. We always have your best interests in mind, so we provide flexible financing options, with approved credit, from Wells Fargo Financial National Bank. You’ll enjoy benefits such as convenient monthly payments, special financing terms, and easy online account management. Apply today or give us a call for more information!
When you need a new air conditioner installation, Seattle furnace repair, or want to schedule routine water heater maintenance, there is one company to call: Bob’s Heating & Air Conditioning. We have years of experience with heating, air conditioning and water heater services, and we can ensure that your home is comfortable throughout the entire year. Contact us today to schedule the high–quality HVAC and water heater services you deserve.
You can usually slip the belt on the motor’s (smaller) pulley first and then start it on the blower pulley. Rotate the blower pulley by hand, holding the belt in place but keeping your fingers from getting caught between the belt and the pulley. The belt should slip right into place. If it seems to be too tight or difficult to set in place, it may be necessary to adjust the motor mount to provide more slack.
×