If your thermostat has a small lever that moves along a calibrated scale that indicates “longer” (not the heat temperature lever), you can try adjusting this—the heat anticipator. Just set it one calibration mark closer to the “longer” setting if the furnace goes off and on too frequently or one mark away if the furnace allows room temperature to rise too high or drop too low before going on or off. It may take several hours for the thermostat to stabilize at this setting, so wait a while and then adjust it again if necessary.

Denver furnace repair is very common in the winter. Our availability 7 days a week is a major advantage. That is the main reason as to why we are a popular furnace repair company. In general, furnaces tend not to start at all or are cracking out cold air instead of heat. Contact us, your Denver furnace repair company so that we can diagnose the problem and set you up with a preventative maintenance package. Click HERE to learn more about our furnace related services.
If you pull out your home’s air filter, hold it up to a light. If you can’t see light coming through it, it’s most likely been a while since your last heating service, and likely time to get a new one. If it’s a simple disposable air filter, just replace it with a like-size new one. It’s also a good idea to write down the date you installed the new filter, so you know how old it is next time it needs to be replaced. Check the filter packaging to see how long the new air filter is supposed to be used.

If you have an older furnace with a standing pilot light, it’s possible that the pilot light has been extinguished. First, confirm that the light is out. Then, turn the gas valve to the off position and wait five minutes. If there is a reset button on your furnace, turn the valve to the pilot position and hold a flame to the dedicated pilot opening while pushing the button for about 30 seconds. (If the pilot doesn’t light on the first attempt, wait a few minutes and repeat the procedure, this time depressing the reset button for 45-60 seconds.) Once the pilot is lit, turn the gas valve back to the on position. If the pilot light won’t stay lit, it’s possible that there is an issue with the thermocouple or ignition system. Call an HVAC professional for assistance.

The cost of a new furnace might make you balk at first thought, but with modern manufacturers offering an extremely diverse range of options with varying AFUE ratings, optional accessories, and more, there is a furnace to meet any budget! It’s just important that you work with the right service team and experts that will work with you rather than try to “sell” you.
Hello, We have a Hunter ceiling fan that no longer spins. It has power, as the light still works and when you push the remote you hear the clicking, like it's trying to engage, but the blades do not spin. Does this sound like a possible flywheel issue? I removed the Remote Receiver, part 85112-02, and apparently it's no longer available, but I don't think the receive is the problem. Any feedback would be welcome.
I'd had them come out before and called because my thermostat wasn't getting power. They said they don't service townhomes. I said that must be a new policy because they've been out before and she said they've had it for awhile. I tried to ask why they don't service townhomes and she said they don't service attached homes or commercial properties. I said that my home isn't commercial and it doesn't really answer my question, but I guess I'll go elsewhere. I couldn't find this policy on their website and I can't really understand why a townhome furnace would be different than an unattached home. When they came out before I seem to remember they did a good job, so it's too bad they have odd policies now.

There may come a time when air conditioning repair is not enough. If you find that your air conditioner breaks down irreparably, then you may need to opt for air conditioning replacement service. At Bob’s Heating & Air Conditioning, our Federal Way air conditioning replacement technicians can make certain that you make an informed decision about the status of your AC, whether you have a heat pump or central AC.
Drilon and Jeremy came out to the house for snaking the sewage line and performing an AC tune up. They were very informative, kind, respectful and professional. Drilon went above and beyond by giving me a whole walk through on our furnace, AC unit and water heater and giving suggestions and prioritizing what he thought would be the most important and safe for our new house right now. They were not pushy with their sales tactics and I will definitely be using them when we are ready to replace our features.

When it comes to heater repair in Denver, a properly serviced system means significant savings for the homeowner. When a Denver heating technician inspects your system before the winter sets in, the first thing they will check is the condition of the air filters. These filters are important, because they are responsible for removing contaminants, allergens, and dust particles from the air every time the system is turned on. When the filters are clogged, expect more particles to easily pass through right into the air you breathe inside the home. The Denver heating experts will inspect and replace any filters that are no longer effective.
The thermocouple is a copper rod that the pilot flame heats-up. When it gets hot enough, the thermocouple signals that there is enough heat to burn the gas fuel being released into the appliance—and so it allows the gas to be released to the burners. In some cases where the pilot light won’t stay lit, the thermocouple needs to be adjusted or replaced. This is generally a job for a professional.
The cost to replace your gas furnace will vary based on the type and size of furnace you select, labor and installation costs, and any repairs your HVAC system may need. Nationally, average HVAC prices for a heating specialist range between $1,800 and $2,500. It’s important to select the right size gas furnace for your heating needs. A furnace that’s too small won’t heat your house properly, while a furnace that’s too large will run inefficiently, cycling on and off and likely breaking down sooner. HVAC specialists calculate your exact heat needs by measuring your home and incorporating variables such as the regional climate and your home’s level of insulation. Retail pricing for gas furnaces can range from $650 up to $3,000 and more. The higher the AFUE (annual fuel utilization efficiency) rating of the furnace, the more efficient it is at turning fuel into heat and the lower your carbon footprint and utility bill will be. HVAC installation costs are often based on an hourly rate and can range from under $50 to over $100 per hour, depending on the company and the furnace being installed. Higher-end furnaces cost more to install because they require added labor and expertise. For a typical installation, it might take two HVAC installation pros one day or less to remove your old furnace and replace it with a new one.
At Sky Heating & Air Conditioning, we understand that HVAC services can really hurt your budget. Many times, you don’t expect to make such large purchases until an emergency arises. We never want you to feel that you cannot afford your comfort and safety. We offer flexible financing options through the Home Project credit card from Wells Fargo, with approved credit. Head over to our financing page to apply, or give us a call for more information!
If your furnace needs to be repaired, you’ll want to find a qualified heating, ventilating and air conditioning (HVAC) repair technician. Each state has its own licensing requirements; some require all HVAC technicians to have an HVAC license, while others only require someone operating an HVAC service and installation company with employees to hold a contractor’s license. For example, in Alabama, the Alabama Board of Heating Air Conditioning, and Refrigeration Contractors regulates licensing, while in Kansas there is no state regulatory body and HVAC licensing can vary by region. For simple furnace repairs like changing out a filter, a trusted handyman can probably handle the job, but a trained professional should be hired for tasks like replacing a gas valve, installing a new inducer fan motor or other critical furnace repair jobs that involve dealing with gas leaks or other dangerous conditions. For more, check out our tips for smart hiring on Thumbtack.
This makes heat pumps a highly energy efficient solution. At Bob’s Heating & Air Conditioning, our Federal Way heat pump specialists often recommend heat pumps because they allow our customers to use a single system year–round. As a highly energy efficient device, your heat pump may also save you money in the long term. Let us take care of your heat pump needs in Federal Way, WA, whether that’s installation or repair.
Tired of dealing with an inoperable furnace? Or, maybe your heating system is only heating half the rooms in your home? Whether you need a new heating system installed or an existing unit repaired, there’s only one name to know—ABC Plumbing, Heating, Cooling & Electric. With more than six decades of experience handling Chicago’s heating problems, our team at ABC has the experience and know-how to get any heating issue diagnosed and resolved quickly and efficiently.
High-efficiency condensing furnaces (90% AFUE and above) are a bit more complex than conventional furnaces. The main differences between a conventional and condensing furnace is the heat exchanger technology used to extract heat from the combustion process and the method used to exhaust the combustion gases. In these ways, the furnaces are very different. The condensing furnace does not have a significantly more efficient combustion process than does a conventional furnace; both use gas burners with electronic ignition. The difference lies in that the condensing furnace has a more efficient heat extraction process after combustion.
×