Has another company told you that your furnace has a cracked heat exchanger?  The heat exchanger is the heart of your furnace. Its failure can result in a dangerous situation for your home and the best solution is usually a new furnace.  Because of these issues, Bonney takes this situation very seriously.  We will offer you proof of the cracked heat exchanger in the form of a picture from our video inspection camera or a report from our exhaust gas analyzer, before we make our recommendation.

When it comes to saving money, using a free online coupon is a no-brainer. We offer these coupons to our customers who complete the online form to help reduce the cost of the service. Please note that the , the 30.00 off work performed coupon serves as an plumbing, HVAC and electrical coupon as well. Not many plumbing companies can boast that they also provide additional HVAC as well as Denver Electrical services, however at Brothers Plumbing, Heating and Electric – we do it all! It is important to call a professional when problems arise, and we will help you out every step of the way, including discounts!

Before rushing into pricey HVAC services, turn to the trusted team of technicians at Steel T Heating & Air Conditioning. We’ll gladly provide free estimates on new HVAC system installations across Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO, and we’ll never try to sell you something you don’t need. From start to finish, we offer superior customer service and ensure you’re satisfied. To learn more or to request a free estimate today, give us a call!
Hi This is my 1st summer owning this house. My electric bill has been doubling for 3 months in a row..I have a Carrier 25HPA6 Performance Series 2 Stage Heat Pump...I recently went online and found instructions on how to clean the outdoor unit. I did so and it was not very dirty. I also have a generator that kicks on when I lose power which does not support the AC unit..We did lose power for a few days recently. I have 2 faults showing on the heat pump unit..one being 53 outdoor air sensor not reading or out of range 255 events and F 37 control fault, heater stuck on 13 events.It is set to cool and the fan to auto. I have never had a heat pump or central Air and am very green to this.The previous owners left no manuals.I have found one online but for installation only. PLease help?

As a Carrier Factory Authorized Dealer, Edwards Heating & Air meets strict requirements for business practices, such as proper licenses, insurance and liability coverage, and customer service.  Our technicians participate in continued factory training, keeping current with advancements in techniques and technology, and adhere to strict installation and maintenance procedures.  Our sales team is educated in leading-edge Carrier products, ensuring accurate recommendations for cost-effective, highly efficient, and reliable solutions to your specific circumstances.  We specialize in heating, cooling, and air quality systems that are widely regarded as the world’s best.  Leading the industry in design and engineering, Carrier products offer unprecedented convenience, economy, and luxury.  These systems don’t just regulate temperature.  They improve your everyday life.
There will always be an occasion for you to rely on a heating or air conditioning system. The major appliances make comfortable life possible, providing warmth on nippy days and cool air during humid summers. Whether or not you use them daily, however, your heating and air conditioning systems need to be maintained every now and then to ensure that they function properly.
Finally, don't underestimate the thermostat as a potential reason why your furnace is not working. Everything on the heating unit itself may function perfectly, but your home still will not heat right if the console you use to set the temperature doesn't communicate your input. A faulty thermostat can either be due to the wall unit itself, or the wiring that connects it to your furnace. Average thermostat repair costs are between $108 and $282, including labor. Replacement costs, of course, depend on the thermostat you choose. Visit our thermostat repair cost guide to learn more about this type of issue.
We offer a number of indoor air quality products and services in Federal Way, WA, including air duct cleaning, air filtration systems and duct sealing. Keeping your ducts in good shape is a great way to prevent noxious particles from accumulating therein. A whole–house air filter is the best way to remove contaminants. Call Bob’s Heating & Air Conditioning today for more details.
Heat pumps that wring heat from outdoor air (and reverse the process in summer to act as an air conditioner) are inexpensive to install as an alternative to a cooling-only air-conditioning system. That makes them the preferred way to heat in the South and Southwest, where winters are typically short and mild. Heat pumps that wring heat from the ground are much more expensive to install, but they are suitable for cold climates because they can maintain their operating efficiency. Other inexpensive electric-heat options include strip heaters, which are installed in the ductwork of central air conditioning, and permanently installed baseboard units in each room. But before you consider any type of electric central heating in colder regions, keep in mind that electricity rates are much higher than those for natural gas and are likely to remain that way for the foreseeable future. You can get rate information for various fuels from local utilities and suppliers.
If you’re looking for a professional heating company in Denver with the proper experience to handle your project, our crew has many years of training and experience on most major heating systems available in the Denver area. Our heating company in Denver understands that in some situations, the scope of the damage may put the units beyond repair. In this instance, we can offer you help finding the right energy efficient model that will provide you warmth and savings in your wallet. Heating in Denver can be expensive during the coldest time of year, so choosing the right heating system can give the same amount of heat while at the same time providing big savings when our Denver heater repair technicians help you pick the right system for your home.

For starters, once a year, vacuum out the area around the furnace’s blower. If possible, also slide out the fan unit, clean each fan blade with a toothbrush, and then vacuum with a brush attachment on a vacuum cleaner. While you’re at it, look for oil ports on the motor, normally located near the motor shaft. If the motor has these, apply two to three drops of non-detergent motor oil into each port (you may have to remove a cover plate to do this). Though most contemporary motors don’t require lubrication, do lubricate motors with oil ports once a year. For more about maintenance, see Maintenance Checklist for Central Heating Systems.
If your furnace has a pilot light, look for the flame. Check your owner’s manual or the instructions posted inside the furnace cabinet for step-by-step lighting instructions. Usually this involves first turning the gas valve to Off and waiting a couple of minutes. Then you turn it to Pilot. Next, press and hold it down while you light the flame. Last, wait a minute or so, release it, and then turn it to On.
When you change the temperature on your thermostat, or the temperature in your home drops, a signal lets the furnace's igniter know that it's time to turn on. Igniters exist in both hot water boilers and forced air furnaces, replacing pilot lights as the switch your unit needs to kick on. Naturally, this is a core part in making sure it works reliably. When it stops working, your unit will not longer know when to actually heat your home. Fortunately, furnace igniter repair doesn't tend to be a major budget problem, and costs less than $300 on average.
Rheem manufactures and markets gas central furnaces that are available in single and multistage configurations, with some models capable of an AFUE rating of more than 90 percent. Some units meet Energy Star requirements. The average price of a Rheem central gas furnace is about $2,300 and Rheems are sold through their dealer network. Rheem products are made by the same manufacturer as Ruud.
Don has earned a lifetime customer! My wife and I moved into our fixer-upper house this summer and just when the weather turned we realized that the 8 year old Goodman furnace in our basement had rusted heat exchange pipes and was leaking carbon monoxide. (So much for the $400 I paid to an home inspector before we moved in...) Fortunately, the furnace had a warranty still active. Not so fortunately, Goodman was incompetent in getting us the replacement part. It took them a month to send it, and then it wasn't even the right part. Don went to bat for us and convinced Goodman to foot the bill for an entirely new furnace! He and another worker made time in their busy schedule during thanksgiving week to come out and get the unit installed. This is above and beyond service and I couldn't be happier.
Heat pumps act like an air conditioner in the summer, removing the heat from the air and then recirculating the cooled air throughout your home. In the winter, though, they can transfer ambient heat from outside into your house, efficiently warming your home with minimal energy consumption. If you do decide on a heat pump in Seattle, WA, make sure that you schedule your installation, maintenance and repair services with a skilled, qualified technician.

Bryant manufactures and markets gas central furnaces that are available in single and multistage configurations, with some models capable of an AFUE rating of more than 90 percent. Bryant markets units that meet Energy Star requirements and makes others that it claims offer quiet operation. A new line of hybrid heat systems that uses gas and an electric heat pump was recently introduced. The average price of a Bryant central gas furnace is about $2,300 and Bryants are sold through their dealer network.
If your furnace needs to be repaired, you’ll want to find a qualified heating, ventilating and air conditioning (HVAC) repair technician. Each state has its own licensing requirements; some require all HVAC technicians to have an HVAC license, while others only require someone operating an HVAC service and installation company with employees to hold a contractor’s license. For example, in Alabama, the Alabama Board of Heating Air Conditioning, and Refrigeration Contractors regulates licensing, while in Kansas there is no state regulatory body and HVAC licensing can vary by region. For simple furnace repairs like changing out a filter, a trusted handyman can probably handle the job, but a trained professional should be hired for tasks like replacing a gas valve, installing a new inducer fan motor or other critical furnace repair jobs that involve dealing with gas leaks or other dangerous conditions. For more, check out our tips for smart hiring on Thumbtack.
Tired of dealing with an inoperable furnace? Or, maybe your heating system is only heating half the rooms in your home? Whether you need a new heating system installed or an existing unit repaired, there’s only one name to know—ABC Plumbing, Heating, Cooling & Electric. With more than six decades of experience handling Chicago’s heating problems, our team at ABC has the experience and know-how to get any heating issue diagnosed and resolved quickly and efficiently.
Like all mechanical systems, your heat pump or gas furnace might run into trouble eventually. Stay alert to any sudden changes in the way that your furnace operates, such as loud or strange sounds as well as a spike in your energy bills. Our Federal Way heating repair technicians can restore the functionality and efficiency of your furnace in no time.

For over two decades, Steel T Heating & Air Conditioning has provided expert heating and cooling solutions in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO. As a Carrier Factory Authorized Dealer and five-time recipient of the President’s Award, we’ve established a reputation as an industry leader, setting ourselves apart from other HVAC companies in the Denver Metro Region. Our NATE-certified team of specialists addresses every project with proficient and timely service, using state-of-the-art products and Factory-Approved replacement parts. For optimal temperature control with minimal maintenance and operational costs, call Steel T Heating & Air Conditioning at (303) 872-8849! We offer heating, air conditioning and indoor air quality services that are proven to keep your home comfortable even when local weather is at its most unpredictable.


Tired of dealing with an inoperable furnace? Or, maybe your heating system is only heating half the rooms in your home? Whether you need a new heating system installed or an existing unit repaired, there’s only one name to know—ABC Plumbing, Heating, Cooling & Electric. With more than six decades of experience handling Chicago’s heating problems, our team at ABC has the experience and know-how to get any heating issue diagnosed and resolved quickly and efficiently.

Heat pumps act like an air conditioner in the summer, removing the heat from the air and then recirculating the cooled air throughout your home. In the winter, though, they can transfer ambient heat from outside into your house, efficiently warming your home with minimal energy consumption. If you do decide on a heat pump in Seattle, WA, make sure that you schedule your installation, maintenance and repair services with a skilled, qualified technician.

When winter sets in across Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO, keeping a warm and comfortable home becomes a priority.  An efficient, safe, and reliable heating system is crucial.  You can count on Steel T Heating & Air Conditioning to keep costs down and rewards high, protecting your ongoing satisfaction with skilled installation, system replacement, seasonal maintenance, and heating repair.  As a Carrier Factory Authorized Dealer, we remain at the forefront of temperature control, specializing in effective heating service procedures and a wide range of the most technologically advanced equipment on the market.  Let us improve the quality of your comfort, enhance energy efficiency, and put precision control over your indoor environment at your fingertips. Contact us today for heating service in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO. Our NATE-certified technicians are always on call to provide Emergency Service, 24 hours a day, 7 days a week, and every project is handled quickly, accurately, and with unfailing professionalism.

Partly to avoid that possibility, the furnaces in most homes are larger than necessary. Initial cost is only one of the drawbacks of that strategy. A furnace that's too large will cycle on and off more frequently. That puts more wear on its components, wastes energy, and might cause the temperature to vary uncomfortably. Also, a larger replacement furnace might require larger ducts. Without the right size ducts, airflow can be noisy.

Bryant manufactures and markets gas central furnaces that are available in single and multistage configurations, with some models capable of an AFUE rating of more than 90 percent. Bryant markets units that meet Energy Star requirements and makes others that it claims offer quiet operation. A new line of hybrid heat systems that uses gas and an electric heat pump was recently introduced. The average price of a Bryant central gas furnace is about $2,300 and Bryants are sold through their dealer network.
Keeping too many heat registers closed can cause heat to build up in your furnace, forcing air out of duct leaks and requiring the blowers to compensate for the added pressure. Essentially, blocking heating vents causes your furnace to work harder and longer than it is intended to work. Further, it forces air pressure to build up in your air ducts, which may both cause and worsens airflow leaks — particularly at joints and seams. Pros recommend keeping at least 80 percent of your heating registers open to prevent unnecessary air from building up in your furnace.
CM Heating performed a Gas Furnace Diagnostic. Customer wanted his echo bee thermastat installed that he had bought himself. Furnace was working fine just wanted his thermastat installed. He thought that the $99 service fee was going to cover that but explained to him what the service fee was for, and explained that there is a additional install fee for the stat. Customer didn’t want to pay the additional fee so I called the office had them listen to the call to make sure we explained to the customer correctly and to see how they would like me to proceed. So I quoted the customer the fee to install the thermostat but he didn’t want us to install it so I left.
The professionals here at Brothers Plumbing, Heating and Electric are well trained, experienced and seasoned experts. We have been the go-to plumbing, electrical and HVAC company in the area for over 35 years and we always come highly recommended by our many satisfied customers. We offer a 100% satisfaction guarantee, have an A+ Rating with the BBB, won the Thornton “People’s Choice Award” for 2016, drug test and background check all of our employees, email you a picture of the technician who will be providing the service before arrival and call once the service is complete to ensure 100% satisfaction. So what are you waiting for? With our competitive pricing, trained and experienced technicians, and well-rounded list of home services, we’re clearly the company to trust. Get in touch with us here at Brothers Plumbing, Heating and Electric to schedule your needed service today!
×