The quality of your heating installation can greatly impact the quality of your overall heating experience. If your system is not carefully selected, sized and installed, there is really just no way that you can hope for it to operate at peak performance and efficiency levels. Never settle for a subpar heating installation when our Seattle heating installation technicians are available to do the job right.
Furthermore, routine water heater maintenance also ensures that your system works as it should. When dust and other sediment build up within the tank or on other components, they can present serious problems for energy efficiency and hot water capacity. Let our Federal Way water heater maintenance specialists keep your water heater in good working order.
If your furnace needs to be repaired, you’ll want to find a qualified heating, ventilating and air conditioning (HVAC) repair technician. Each state has its own licensing requirements; some require all HVAC technicians to have an HVAC license, while others only require someone operating an HVAC service and installation company with employees to hold a contractor’s license. For example, in Alabama, the Alabama Board of Heating Air Conditioning, and Refrigeration Contractors regulates licensing, while in Kansas there is no state regulatory body and HVAC licensing can vary by region. For simple furnace repairs like changing out a filter, a trusted handyman can probably handle the job, but a trained professional should be hired for tasks like replacing a gas valve, installing a new inducer fan motor or other critical furnace repair jobs that involve dealing with gas leaks or other dangerous conditions. For more, check out our tips for smart hiring on Thumbtack.
When you trust your winter comfort to Edwards Heating & Air, we answer with state-of-the-art technology, NATE-certified technicians, and prompt action.  As a Carrier Factory Authorized Dealer, we specialize in the most proven and sophisticated solutions to home and commercial temperature control.  Through ongoing factory training and strict installation and service procedures, the team from Edwards Heating & Air delivers superior workmanship and superior results.  We ensure your demands for efficiency, reliability, and consistent heating are met, and your expectations for courteous and skilled service are exceeded.  Whether you are in the process of building your dream home, in need of effective heating for your existing home or business, or upgrading your furnace or heat pump, our installation specialists provide informed recommendations, attention to detail, and quick turnaround on your project.  Serving Acworth and the surrounding areas of Acworth, Alpharetta, Cummings, Cartersville, Kennesaw & Woodstock, GA since 2001, you can count on Edwards Heating & Air for everything from installation and maintenance to emergency repairs.

*We work on all brands: Adams, Aire-Flo, Amana, Arcoaire, Armstrong, Beutler, Bryant, Carrier, Centurion, Coleman, Comfortmaker, Cozy, Daikin, Day & Night, Dayton, Ducane, Emerson, Empire, Evcon, Fedders, Friedrich, Frigidaire, Fujitsu, Gaffers & Statler, General Electric, Gibson, Goldstar, Goodman, GMC, Haier, Heil, Honeywell, Intertherm, Janitrol, Kenmore, Lennox, Luxaire, Maytag, Mitsubishi, Payne, Rheem, Ruud, Samsung, Sanyo, Sears, Sharp, Spartan, Tappan, Tempstar, Thermal Solutions, Trane, Utica, Weatherking, Westinghouse, Whirlpool, Williams, York, and Zephyr.
Air Conditioning Your home's air conditioner is an essential part of your overall indoor comfort. A properly working system can mean the difference between a cool, comfortable summer and a hot, miserable few months. If you're currently dealing with a broken air conditioner, an inefficient system, or you would like to schedule a routine, pre-season tune-up, Horizon Services is here to help!
I can't say enough about Hassan. He is a heart of gold and we love his outlook on taking care of customers. He's honest and knows exactly what he is doing, not pretending and just pulling things apart going back and forth puzzled. He even wanted to check our unit in the attic to make sure it was safe. He puts his customers first! It was late but he still drove an hour to fix our furnace. My wife felt completely safe with him and loved him! So if you are a single woman out there, no worries. Hassan is safe to hire. 👌🏾Very good spirited guy who wants you to see your AC issues and give you options and why, with honesty! We had him to add a safety switch to our attic furnace to prevent a flood of our home in the event it has a leak issue. He put one on our basement attic that never was even an option. We are completely satisfied with his company and will be our main man now! He's a serious blessing to have. Thank you! Thank you!
Our new HVAC unit started to leak badly, so we set up an appointment for an on-site diagnosis. The two-man crew arrived in the agreed-upon window and was very experienced. They gave off the impression that they had seen just about everything before. They quickly found the source of the problem, fixed it, and explained in full what they were doing and why. They also offered up some helpful tips of what to look for and how to self-diagnose issues.
In order to make your everyday life easier and more enjoyable, Sky Heating & Air Conditioning specializes in state-of-the-art heating and cooling technology, partnering with Trane, Mitsubishi, and Waterfurnace.  We bring you HVAC solutions that represent the best the industry has to offer, ensuring long-term performance and satisfaction.  Whether you’re looking for the design/build of a new system, replacement, or hoping to cut costs and enhance convenience, we answer with proven products.  Our qualified HVAC technicians help you determine the ideal solution for your exact requirements, and make sure you’re happy with every step of the process.  From ductless HVAC to geothermal heating and cooling systems, we offer a wide selection of options and comprehensive services to answer any type of challenge.  Call on Sky Heating & Air Conditioning and let us exceed your expectations today!
Adam V. from Swan Plumbing & Heating of Denver, CO came out and tuned up our furnace and A/C units. He was courteous prompt and professional, but beyond that went out of his way to give us recommendations on things we can do to get the most life and performance out of our existing equipment. When we are ready for upgrades and additional services, Swan will be our first (and only) call.
An annual inspection of your unit can ensure that the various potential problems mentioned above are detected early, and before they require complete replacement. During this inspection, for instance, a professional might find small cracks in your heat exchanger or a faulty seal in your blower motor. Some manufacturer's warranties even require these annual inspections to maintain validity. Typically, your furnace inspection will cost between $80 and $150 depending on the area in which you live and the professional you work with.

Put simply, any home that uses air pushed through ductwork for heating purposes takes advantage of forced air heating. In other words, this term refers not to your furnace, but to the delivery method of the heat throughout your home. Forced air heating is possible with electric or gas furnaces, or a heat pump. Any issues with this delivery system that aren't directly related to the furnace likely have to do with the duct work, which costs between $35 and $55 per linear square foot to repair, or the air handling unit.

For starters, once a year, vacuum out the area around the furnace’s blower. If possible, also slide out the fan unit, clean each fan blade with a toothbrush, and then vacuum with a brush attachment on a vacuum cleaner. While you’re at it, look for oil ports on the motor, normally located near the motor shaft. If the motor has these, apply two to three drops of non-detergent motor oil into each port (you may have to remove a cover plate to do this). Though most contemporary motors don’t require lubrication, do lubricate motors with oil ports once a year. For more about maintenance, see Maintenance Checklist for Central Heating Systems.
• If your furnace is inside the house, it may be located in an area that is magnifying the sound it makes – such as under a staircase. Often moving the furnace to another part of the house can reduce that noise. You may find that it’s in an area that was previously occupied by another older type of furnace, and you never heard those sounds from that one. Please keep in mind that modern furnaces are built differently – with multiple speeds and stages – which may create different sounds and require more airflow than your old ductwork has available. If the furnace doesn’t get enough air, it gets cranky.

Dirty furnace filters are one of the most common causes of a furnace failure. A dirty furnace filter can limit the airflow through your furnace and cause it to overheat. If you suspect a dirty air filter, change the filter, press the reset button (if your furnace has one) and see whether your furnace begins to emit heated air. Change your furnace filters regularly — pros recommend changing them once a month — to ensure that your furnace continues to work properly. Unaddressed, dirty furnace filters can cause extensive, and expensive, damage to your home’s heating system.


When you trust your winter comfort to Edwards Heating & Air, we answer with state-of-the-art technology, NATE-certified technicians, and prompt action.  As a Carrier Factory Authorized Dealer, we specialize in the most proven and sophisticated solutions to home and commercial temperature control.  Through ongoing factory training and strict installation and service procedures, the team from Edwards Heating & Air delivers superior workmanship and superior results.  We ensure your demands for efficiency, reliability, and consistent heating are met, and your expectations for courteous and skilled service are exceeded.  Whether you are in the process of building your dream home, in need of effective heating for your existing home or business, or upgrading your furnace or heat pump, our installation specialists provide informed recommendations, attention to detail, and quick turnaround on your project.  Serving Acworth and the surrounding areas of Acworth, Alpharetta, Cummings, Cartersville, Kennesaw & Woodstock, GA since 2001, you can count on Edwards Heating & Air for everything from installation and maintenance to emergency repairs.
Even if your air conditioning unit is still working, depending on the type of system in your home today, you could recoup your investment in a new system in as little as three years. However, that doesn't mean that your system needs to be replaced. Furnaces, air conditioners, and other heating and cooling systems have made tremendous gains in efficiency over the past five years, so if you have an older unit, it is worth taking a look at whether or not a repair is the best investment.
I can't say enough about Hassan. He is a heart of gold and we love his outlook on taking care of customers. He's honest and knows exactly what he is doing, not pretending and just pulling things apart going back and forth puzzled. He even wanted to check our unit in the attic to make sure it was safe. He puts his customers first! It was late but he still drove an hour to fix our furnace. My wife felt completely safe with him and loved him! So if you are a single woman out there, no worries. Hassan is safe to hire. 👌🏾Very good spirited guy who wants you to see your AC issues and give you options and why, with honesty! We had him to add a safety switch to our attic furnace to prevent a flood of our home in the event it has a leak issue. He put one on our basement attic that never was even an option. We are completely satisfied with his company and will be our main man now! He's a serious blessing to have. Thank you! Thank you!
Your HVAC system is an important appliance with a limited lifetime. Depending on use, with regular maintenance you can expect your furnace and air conditioner to last between 8-18 years before you will need to replace the old one. However, poor maintenance is one of the primary reasons for early replacement HVAC systems ahead of end of average life expectancy.
Air Quality Services, Inc., is a MN HVAC, Heating, Cooling, Air Conditioning, Geothermal Heat Pump, Ductless Mini-Split and Furnace repair, service, replacement and maintenance Company. Air Quality Services, Inc. employs only the best technicians for air conditioner repairs and, furnace repairs as well as all air conditioner replacements, furnace replacements and boiler replacements in Lakeville MN, Hopkins MN, Burnsville MN, Maple Grove MN, Champlin MN, Chanhassen MN, Chaska MN, Crystal Bay MN, Edina MN, Excelsior MN, Eden Prairie MN, Minnetonka MN, Long Lake MN, Minnetonka Beach MN, Mound MN, Plymouth MN, Prior Lake MN, Saint Bonifacius MN, Savage MN, Shakopee MN, Spring Park MN, Victoria MN, Waconia MN, Wayzata MN, Navarre MN, Bloomington MN, Richfield MN, St. Louis Park MN, Shorewood MN, Golden Valley MN. To set-up a repair service estimate or replacement estimate, call (952) 928-3838. So when you ask to find "A good heating and air conditioning repair service company near me," you've come to the right place. Air Quality Services, Inc. services all furnace, AC, humidifier, filter, Whole House Dehumidifiers, thermostat and water heater brands including Carrier, Bryant, Payne, Trane, Lennox, Rheem, Ruud, Amana, Daikin, Mitsubishi, Fujitsu, Crown, Frigidaire, Gibson, Goodman, Lochinvar, Maytag, Weil McLain, A O Smith, Kohler, American Standard, GeoExcel, General, Aprilaire, Honeywell, White Rodgers, Dynamic, York and Skuttle.
The national average for furnace replacement is between $1,800 and $2,500. The cost can range dramatically higher depending on the model of furnace you select, any repair work you require, your location and the cost of installation. Furnace installation costs can be more than the furnace itself due to the cost of doing business and the expertise needed to install the HVAC equipment. Installing a new furnace generally requires technical know-how and the proper tools and licensing. It’s best to hire a pro and budget for furnace installation rather than risk potentially unsafe DIY installation. This will ensure your home’s safety. Check to see if your HVAC contractor has the proper licensing to do the job. If you need duct repair or replacement, expect to pay more for your furnace installation costs. The price for duct repair could be an hourly rate ranging on average anywhere from $85 to $150 per hour, with additional costs for parts.
Here at Brothers Plumbing, Heating and Electric, we have a Home Care Club that provides members with a number of benefits. These benefits include: 2 year warranty on all work (drain work is excluded), transferable club membership, no “show up” fees, priority service, 10% discount on repairs, quarterly newsletters, carefree scheduling (we will contact you and remind you when you need service), 2 free furnace/air conditioner filter changes, exclusive coupons, quarterly drawings, 4 on-going safety checks, and a 100% satisfaction guarantee. So if you’d like to join our Home Care Club, then simply give us a call or click here today.
×