When you change the temperature on your thermostat, or the temperature in your home drops, a signal lets the furnace's igniter know that it's time to turn on. Igniters exist in both hot water boilers and forced air furnaces, replacing pilot lights as the switch your unit needs to kick on. Naturally, this is a core part in making sure it works reliably. When it stops working, your unit will not longer know when to actually heat your home. Fortunately, furnace igniter repair doesn't tend to be a major budget problem, and costs less than $300 on average.
Trained to quickly and accurately make the diagnosis, our expert troubleshooters possess both the skills and speed that you need. Responding swiftly to your call, one of our technicians will provide you with a handwritten, fair and competitive estimate that details how exactly your system will be repaired. Offering a one-year parts and labor warranty, we restore your heat—and minimize your financial stress.

For starters, once a year, vacuum out the area around the furnace’s blower. If possible, also slide out the fan unit, clean each fan blade with a toothbrush, and then vacuum with a brush attachment on a vacuum cleaner. While you’re at it, look for oil ports on the motor, normally located near the motor shaft. If the motor has these, apply two to three drops of non-detergent motor oil into each port (you may have to remove a cover plate to do this). Though most contemporary motors don’t require lubrication, do lubricate motors with oil ports once a year. For more about maintenance, see Maintenance Checklist for Central Heating Systems.
When you work with Bob’s, we make sure your furnace is properly sized and installed for optimal performance. When it comes to furnace installation in Renton, WA, Bob’s is dedicated to excellence, which defines our service. We know that professional furnace installation is the best way to protect its performance quality. Call today for more details.
If your furnace’s motor runs but the blower doesn’t move air, the belt that connects the two probably has broken. Replacing it is an easy fix. First, turn off all power to the unit and turn off the gas at the gas valve that serves the furnace. Remove the door on the front of the furnace cabinet to give you access to the blower (it might be on a slide-out drawer.) Check the number stamped on the belt and get an exact replacement from a home center or heating supply outlet.
There are a number of reasons that your water heater installation must be completed by a qualified party. First of all, it must be the right size so that it can handle your hot water needs. Plus, only a professional water heater installation in Seattle, WA can ensure that the system operates safely and effectively. Call today to discuss your water heater installation options.
When is water heater replacement necessary? If your system breaks down irreparably without any hope for repair, then it’s fairly obvious what needs to be done. But there are other reasons for considering water heater replacement in Federal Way, WA as well. For example, you may want to consider replacing your old model if it no longer works efficiently or effectively, even if it still runs.
When you change the temperature on your thermostat, or the temperature in your home drops, a signal lets the furnace's igniter know that it's time to turn on. Igniters exist in both hot water boilers and forced air furnaces, replacing pilot lights as the switch your unit needs to kick on. Naturally, this is a core part in making sure it works reliably. When it stops working, your unit will not longer know when to actually heat your home. Fortunately, furnace igniter repair doesn't tend to be a major budget problem, and costs less than $300 on average.
If your heating system in Everett, WA is not working it is likely your furnace needs repair or service. At times the fix is simple, other times it is not. Our heating and furnace service technicians have years of experience working on furnaces like yours in Everett, WA. C.M. Heating has service vehicles on call that are fully equipped with the tools and parts necessary to get your furnace back up and operating.
While there's nothing you can do to guarantee your air conditioner or furnace will never need repairs, there are ways to take better care of your system. Changing out the air filters every 3-6 months, making sure nothing is obstructing or interfering with the outside unit, and keeping all vents unblocked in well-used rooms will help keep your air conditioning and heating system operating efficiently.
On average, furnace repair costs $287 nationally, with some homeowners spending as little as $60 while others paying $900 for furnace maintenance. Repairs to an electric furnace can run you $300 or less, while gas furnace repairs can be more complex and range from $375 to $1,200, depending on the what needs service. Most homeowners spend between $131 and $453 to fix their furnace. Here is what you need to know, along with the various factors that could affect the price of your furnace repair.

The quality of your heating installation can greatly impact the quality of your overall heating experience. If your system is not carefully selected, sized and installed, there is really just no way that you can hope for it to operate at peak performance and efficiency levels. Never settle for a subpar heating installation when our Seattle heating installation technicians are available to do the job right.
For over two decades, Steel T Heating & Air Conditioning has provided expert heating and cooling solutions in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO. As a Carrier Factory Authorized Dealer and five-time recipient of the President’s Award, we’ve established a reputation as an industry leader, setting ourselves apart from other HVAC companies in the Denver Metro Region. Our NATE-certified team of specialists addresses every project with proficient and timely service, using state-of-the-art products and Factory-Approved replacement parts. For optimal temperature control with minimal maintenance and operational costs, call Steel T Heating & Air Conditioning at (303) 872-8849! We offer heating, air conditioning and indoor air quality services that are proven to keep your home comfortable even when local weather is at its most unpredictable.

Locally owned and family operated, M and M, Heating & Cooling, Plumbing & Electrical customizes solutions to perfectly fit your requirements and lifestyle. We specialize in a wide range of services including plumbing, water heating, indoor air quality, and residential and commercial temperature control. Our team of highly trained and certified technicians are fully licensed and insured, adhere to strict service procedures, and meet exacting standards of quality. Call on M and M, Heating & Cooling, Plumbing & Electrical at (720) 443-6119 for dedicated service throughout Longmont, CO & surrounding areas, and have confidence in a rewarding experience and long-term results. With over eighteen years of satisfied customers, we take great pride in a job done right.


For over two decades, Steel T Heating & Air Conditioning has provided expert heating and cooling solutions in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO. As a Carrier Factory Authorized Dealer and five-time recipient of the President’s Award, we’ve established a reputation as an industry leader, setting ourselves apart from other HVAC companies in the Denver Metro Region. Our NATE-certified team of specialists addresses every project with proficient and timely service, using state-of-the-art products and Factory-Approved replacement parts. For optimal temperature control with minimal maintenance and operational costs, call Steel T Heating & Air Conditioning at (303) 872-8849! We offer heating, air conditioning and indoor air quality services that are proven to keep your home comfortable even when local weather is at its most unpredictable.

When you hire Steel T Heating & Air Conditioning, know that you’re hiring a business that is fully licensed and insured with certified technicians that receive ongoing training. In order to earn the status of a Carrier Factory Authorized Dealer, our company is held to strict standards for customer satisfaction, product knowledge, technical expertise, and business practices. For five years in a row, we were honored to be selected as a Carrier President’s Award winner. This award identifies Steel T Heating & Air Conditioning as an example of excellence for dealers across the nation to follow. We’re also the only heating and cooling company in the state of Colorado to be inducted into the Carrier Hall of Fame, a distinction that only 25 other dealers in the country can claim. We are extremely proud of the superior service and quality products we offer to homeowners in Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO. We never rest on past achievements, but continue to find new ways of earning your business.


Wow!!! I had a gas leak with all my kids and animals in the house in the middle of the night!!! Scary!! Jake showed up quickly after all gas was shut off and spent six hours at my house until heat worked, gas was on again and most importantly my family was safe. And all at a cost that was conscious of my intent to stay financially in the game to support my kids!!!
Call us today at (302) 200-4266 today to schedule a service heating system repair, replacement, installation, or tune-up services with our capable team! our team! We offer honest, upfront pricing in writing and industry leading warranties on parts and service. Find your local Horizon today to schedule heating system repair, replacement, installation, or tune-up services with our capable team!

If your home is not heated using forced air, chances are a boiler will make sure you stay warm during cold nights. A hot water system delivers hot water through a network of pipes that run to every room in your house. The heating effect gets maximized through radiators. The most common issues with hot water heating tend to be not be major, but small problems that add up over time. Mineral deposits within the water tank, a pilot light malfunction, or an issue with a radiator itself can require professional repair. On average, you will pay between $183 and $582 for these problems. The exact amount will depend on the exact problem, as described in our boiler repair cost guide.


You cannot afford to gamble with your comfort. If your air conditioner is not expertly installed, routinely maintained and professionally repaired, you are really putting your comfort at risk. Our Seattle, WA air conditioning experts have the experience and training they need to ensure that your air conditioner is ready for action when temperatures rise.
Cut down on energy costs and prevent damage to your furnace by addressing a gas furnace that's overactive or short cycling. Besides the need for consistently comfortable temperatures, this issue could cause long-term safety issues to your home, making it very important to address. From a faulty thermostat to a dirty filter, there are several possible causes to investigate.
×