Partly to avoid that possibility, the furnaces in most homes are larger than necessary. Initial cost is only one of the drawbacks of that strategy. A furnace that's too large will cycle on and off more frequently. That puts more wear on its components, wastes energy, and might cause the temperature to vary uncomfortably. Also, a larger replacement furnace might require larger ducts. Without the right size ducts, airflow can be noisy.
A number of other variables can influence your decision on whether to repair or replace your furnace, as well. In addition to cost and brand, consider the expected lifetime of your furnace. If it is more than 15 years old, it might make more sense to invest in a new unit even if it costs more than simply repairing the current problem. Long-term costs also play into the equation. For example, your new furnace may be more energy efficient than the current unit. Even though you will pay more for the actual installation, you might be able to make back your investment through lower energy bills. To make your decision, consult with a reliable professional on what to do. In inspecting your furnace, they will be able to make an informed recommendation that looks not just to the next year, but years into the future. That way, you can make the best possible decision for your home and budget long-term.

If I could give them 10 stars I would. Don is extremely knowledgeable but more importantly honest. PSE had done a free diagnosis and told me I would need a new induction motor for around $850 or possibly a new furnace. PSE doesn't do the repairs so I found Affordable furnace on yelp. Don showed me where the noise was coming from and that we didn't need the other repair. He performed some routine maintenance and enlightened me on much better furnace filters. He said we will probably need a new furnace in a couple years but given the fact we've lived here 18 years and it was here before we got here I think we're doing pretty good. When it is time for a new furnace there's only one company we will be calling. Thanks Affordable Furnace!

If your heating system in Everett, WA is not working it is likely your furnace needs repair or service. At times the fix is simple, other times it is not. Our heating and furnace service technicians have years of experience working on furnaces like yours in Everett, WA. C.M. Heating has service vehicles on call that are fully equipped with the tools and parts necessary to get your furnace back up and operating.
Efficient operation is a function of regular heating system maintenance. When a heating system malfunctions, any one of its three components – heat/cold source, distribution system, or the thermostat  – can be causing the problem. Our technicians can easily detect an impending issue before you have to replace a heating unit or spend a lot of money on parts and labor.
At Steel T Heating & Air Conditioning, we know how frustrating it can be when you have to invest large amounts of money in your HVAC systems. We always have your best interests in mind, so we provide flexible financing options, with approved credit, from Wells Fargo Financial National Bank. You’ll enjoy benefits such as convenient monthly payments, special financing terms, and easy online account management. Apply today or give us a call for more information!
I'd had them come out before and called because my thermostat wasn't getting power. They said they don't service townhomes. I said that must be a new policy because they've been out before and she said they've had it for awhile. I tried to ask why they don't service townhomes and she said they don't service attached homes or commercial properties. I said that my home isn't commercial and it doesn't really answer my question, but I guess I'll go elsewhere. I couldn't find this policy on their website and I can't really understand why a townhome furnace would be different than an unattached home. When they came out before I seem to remember they did a good job, so it's too bad they have odd policies now.
There will always be an occasion for you to rely on a heating or air conditioning system. The major appliances make comfortable life possible, providing warmth on nippy days and cool air during humid summers. Whether or not you use them daily, however, your heating and air conditioning systems need to be maintained every now and then to ensure that they function properly.
I really appreciated the great same-day service provided by Chris H, Swan Plumbing & Heating's technician today. I made an appointment to get an estimate on the water heater replacement, and expected to make another appointment for the installation. But Chris came prepared with all the equipment needed, and replaced our leaking water heater in a very efficient manner within about 2 hours.

To keep your furnace in good working order it’s important to have it regularly cleaned. The national average furnace cleaning cost ranges from $60 to $80, though prices can vary greatly based on where you live in the country and what your furnace maintenance includes. An HVAC company may have different rates for different levels of furnace maintenance. For example,one company may offer general furnace maintenance for $79 and advanced maintenance for $138. Another company may offer a 38-point maintenance check for $89 and a 64-point maintenance check for $178. According to Energy.gov, a standard furnace cleaning and maintenance visit can include:

They did an outstanding work when you long time ago that our old furnace needed to be replaced. We contacted The Right Choice heating and air in one of the wraps came to our house give us a really good price for a new Trane furnace. The next day they arrived on time and finish the jobs within few hours we cleaned after themselves and made sure to ask us if we understand how to operate our new system. I will definitely recommend to use the Right choice heating and air

What does air conditioning maintenance mean? Well, it means much more than just changing the air filter. Over time, its internal components may accumulate a substantial amount of dust and other debris that can begin to take its toll on system performance and energy efficiency. Let us take care of your cooling system with our air conditioning maintenance in Federal Way, WA.
Denver residents are encouraged to contact Brothers Plumbing, Heating and Electric when in need of fast repairs. If the house feels cold, it could be because the heating system is malfunctioning. When you give us a call, a Denver furnace repair expert will be at your aid right away for a complete diagnosis. We will always attempt to fix the furnace before considering a replacement. However, if the furnace cannot be repaired our Denver furnace repair experts will help you determine the best new furnace.
You'll find we take our job seriously and value highly the trust that is placed in us. To understand why we go so far beyond what others do by investing in the extra training and equipment we believe necessary to protect your home and family properly, take a moment to view our short 30 second video that best explains "why we do it"...and "why it matters." 

Next check and clean the furnace’s flame sensor. The video below shows you how—note that this guy fixes it in about 5 minutes. We would probably use a little bit of emory paper, but he cleans the sensor with a 5-dollar bill. Another video further down the page under the discussion of “If your furnace keeps shutting off after about 5 minutes” shows the same project with a different brand of furnace.
Seattle furnaces can run nine months of the year. Based on the average temperatures in our area, if you compared running your furnace to a car it would get the equivalent of 1.8 million miles over its expected lifespan of 15 years. Your heating system will work hard for you, but like your car, doing routine and regular maintenance will keep it running smoothly, avoid problems, and keep your warranty intact.
Here at Four Seasons Heating and Air Conditioning, we understand that the toughest aspects of winter weather can sometimes be too much for any furnace. That’s why we offer year-round, same-day furnace maintenance to ensure that your home and family never freeze. With no additional charge for after-hours service, you’ll soon discover that Four Seasons Heating and Air Conditioning is the affordable, expert service your home needs and deserves.
On average, furnace repair costs $287 nationally, with some homeowners spending as little as $60 while others paying $900 for furnace maintenance. Repairs to an electric furnace can run you $300 or less, while gas furnace repairs can be more complex and range from $375 to $1,200, depending on the what needs service. Most homeowners spend between $131 and $453 to fix their furnace. Here is what you need to know, along with the various factors that could affect the price of your furnace repair.
I had a minor crisis at my home with a backed up sewer drain in the basement and me just home from a freak accident where I broke both arms! Spencer narrowed down the problem and called his coworker who had the equipment to snake my drain and stayed to clean up until the issue was resolved. He was courteous and careful to make sure my carpet didn't get marked up and cleaned up well. I am so grateful for him being willing to go the extra mile to help me out!
A number of other variables can influence your decision on whether to repair or replace your furnace, as well. In addition to cost and brand, consider the expected lifetime of your furnace. If it is more than 15 years old, it might make more sense to invest in a new unit even if it costs more than simply repairing the current problem. Long-term costs also play into the equation. For example, your new furnace may be more energy efficient than the current unit. Even though you will pay more for the actual installation, you might be able to make back your investment through lower energy bills. To make your decision, consult with a reliable professional on what to do. In inspecting your furnace, they will be able to make an informed recommendation that looks not just to the next year, but years into the future. That way, you can make the best possible decision for your home and budget long-term.
We aid our clients with whatever problems they may have with their heating and/or cooling. For households that have yet to install any sort of HVAC system, we can handle setting up the major appliances. We can repair furnaces that have been badly damaged, or replace them outright as needed. Our team also performs air conditioning repair work or exchanges worn-out cooling units for completely new systems. In addition, our team also performs ductwork, which covers the installation and repair of duct work. Contact us today and we will find a solution to your heating or cooling concerns, whatever they may be.

If your home is not heated using forced air, chances are a boiler will make sure you stay warm during cold nights. A hot water system delivers hot water through a network of pipes that run to every room in your house. The heating effect gets maximized through radiators. The most common issues with hot water heating tend to be not be major, but small problems that add up over time. Mineral deposits within the water tank, a pilot light malfunction, or an issue with a radiator itself can require professional repair. On average, you will pay between $183 and $582 for these problems. The exact amount will depend on the exact problem, as described in our boiler repair cost guide.
We’ve earned a reputation across Portland and The Dalles for dedicated customer service.  Consistently maintaining an A+ rating from the Better Business Bureau, Sky Heating & Air Conditioning meets higher standards of excellence through the little, important details that add up to a job well done.  It starts with a friendly voice on the phone, and the immediate focus of our extensive resources on your requirements.  From there, you can count on timely arrival, organized project management, careful cleanup, competitive pricing, and exemplary performance in every aspect of service.  When you contact Sky Heating & Air Conditioning for HVAC service in The Dalles and Portland, OR, your project is always handled by a highly-trained professional, who will achieve your goals for efficiency, reliability, and sustainable home comfort.
Are you satisfied with your heating and cooling systems? What about your hot water? At Bob’s Heating & Air Conditioning, we offer the best in heating, air conditioning and water heater services throughout the greater Federal Way, WA area. Whether you need a new HVAC system installed or your existing system repaired, we can make sure that your comfort and convenience are restored. Call us today to find out more about what we do.
We not only restore the functionality and efficiency of water heaters. We also install new ones from scratch in the event that you’re moving into a new home; and we’re always available to carefully remove your existing one in order to make room for a new model. Our water heater maintenance is comprehensive and detailed. Call us today to schedule a water heater service in Federal Way, WA.
Before rushing into pricey HVAC services, turn to the trusted team of technicians at Steel T Heating & Air Conditioning. We’ll gladly provide free estimates on new HVAC system installations across Littleton, Lakewood, Centennial, Highlands Ranch & Englewood, CO, and we’ll never try to sell you something you don’t need. From start to finish, we offer superior customer service and ensure you’re satisfied. To learn more or to request a free estimate today, give us a call!
Whether you have an electric or gas furnace, you shouldn’t have to suffer when your heater is not working. At Sears Home Services, our technicians fix many of the top furnace manufacturers. The issues you may face with your furnace can vary depending on the type of heating system. If you own an electric model and it isn’t working, some of the potential causes include:
About us: Vredevoogd Heating & Cooling has been in business since 1964. As a financially stable company known for its reliable expertise and first-rate customer care, Vredevoogd Heating & Cooling is a company you can trust. Moreover, when you do business with a stable business like Vredevoogd Heating & Cooling, you have the peace of mind of knowing that your warranties are solidly backed by a company that intends to remain in business for another 50+ years and beyond. Don’t trust your essential home systems and investment to any fly-by-night company. Our best practices ensure that we will be here to meet our customer’s HVAC needs for decades to come. Vredevoogd Heating & Cooling founder Dennis Vredevoogd set the high standards by which the company continues to pride itself for. Today, the company continues to be family owned and operated by the founder’s sons, Michael and Thomas, who are committed to maintaining the company’s high standards and complementing them with the innovative technical know-how needed to service today’s advanced HVAC systems.
24HR Home Comfort Services, is a Wisconsin and Illinois Heating, Cooling, Air Conditioning, Geothermal Heat Pump, and furnace repair, service, replacement and maintenance Company located in Rock County WI and McHenry County IL. 24HR Home Comfort Services employs only the best technicians for air conditioner repair and, furnace repair as well as all air conditioner replacement, furnace replacement and boiler replacement in Afton WI, Avalon WI, Beloit WI, Brodhead WI, Brooklyn WI, Burlington WI, Cambridge WI, Clinton WI, Darien WI, Delavan WI, Dousman WI, Eagle WI, East Troy WI, Edgerton WI, Elkhorn WI, Evansville WI, Fontana WI, Footville WI, Fort Atkinson WI, Hanover WI, Janesville WI, Jefferson WI, Johnson Creek WI, Lake Geneva WI, Lake Mills WI, Lyons WI, Madison WI, Marshall WI, McFarland WI, Milton WI, Mukwonago WI, North Prairie WI, Oconomowoc WI, Oregon WI, Orfordville WI, Palmyra WI, Rockton WI, Roscoe WI, Sharon WI, South Beloit WI, Stoughton WI, Sullivan WI, Sun Prairie WI, Walworth WI, Watertown WI, Watertown WI, Whitewater WI, and Williams Bay WI. A good heating and air conditioning repair or service company near you. To set-up a repair service estimate or replacement estimate, call (608) 868-6412. 24HR Home Comfort Services services all furnace, AC, humidifier, filter, thermostat and water heater brands including Carrier, Bryant, Payne, Trane, Lennox, Rheem, Ruud, Amana, Crown, Frigidaire, Gibson, Goodman, Lochinvar, Maytag, Weil McLain, A O Smith, Kohler, American Standard, GeoExcel, General, Aprilaire, Honeywell, White Rodgers, Dynamic and Skuttle.
With flexible financing options from Wells Fargo Financial National Bank, with approved credit, you can enjoy many benefits. From convenient monthly payments to easy-to-use online account management, Wells Fargo financing offers top notch service and control over your finances. We know you want to stay comfort without breaking the bank, so we help you manage your expenses. Call us at 303-678-5576 to learn more!
CM Heating performed an electric furnace Diagnostic - Upon investigation, I found that the sequencer has failed which is why all heat elements are not being activated (3 out of 5 work). This is the second replacement sequencer needed in less than 5 years of operation, the unit is an old model of air handler and only source of heat. Replacement of sequencer is needed, however, based on age and efficiency recommend upgrade of system.
As your air conditioner operates, it is going to suffer some general wear and tear. There is really no way in which to avoid this. However, wear and tear does not have to result in serious problems with your air conditioning system. Just make sure that you schedule professional air conditioning maintenance in Seattle, WA in order to keep your system in great working condition.
Inspect your furnace thermostat by first making sure that it’s turned on. Also, ensure that the thermostat switch is turned to “heat” and not “cool”. If your furnace will still not start with the thermostat on, try adjusting the temperature settings to a few degrees higher. Inspect any visible wires for breaks or splits, and make sure your thermostat batteries are not dead. Do not touch any open wires; contact a professional.

Tired of dealing with an inoperable furnace? Or, maybe your heating system is only heating half the rooms in your home? Whether you need a new heating system installed or an existing unit repaired, there’s only one name to know—ABC Plumbing, Heating, Cooling & Electric. With more than six decades of experience handling Chicago’s heating problems, our team at ABC has the experience and know-how to get any heating issue diagnosed and resolved quickly and efficiently.


The motor belt should be firm, giving no more than ½ inch when pressed. It should also be free of cracks and damage. To remove the belt, you will need a wrench and a replacement belt. Loosen, do not remove, the motor bolts. You only need them loose enough to move the motor and slacken the belt. Remove the belt and inspect it, replacing it with a new one if necessary. Belt: $4.00 to $6.00.

When your furnace isn’t regularly serviced it can operate less efficiently. This increases your energy bills and also prevents your furnace from keeping your home as warm as you like. Keep your furnace properly maintained with regular service. The national average furnace service cost is between $60 and $80. Companies may offer tuneup specials that cover all the necessary testing, tightening, measuring and cleaning to keep your equipment running at top efficiency. If you have a newer system, furnace service costs may be covered by your warranty. Outside of warranty, a basic tuneup might start at $58 and a more advanced maintenance cleaning could be over $120. Here are some signs your furnace may need service:


As your air conditioner operates, it is going to suffer some general wear and tear. There is really no way in which to avoid this. However, wear and tear does not have to result in serious problems with your air conditioning system. Just make sure that you schedule professional air conditioning maintenance in Seattle, WA in order to keep your system in great working condition.

As a Bryant Factory Authorized Dealer, we meet rigid criteria for technical training, customer approval ratings, and insurance coverage. Serving the Chicagolands North Shore since 1940, we’ve honed our services to accommodate local issues and ensure maximum reward. Improving the health of our customer’s home and lifestyle, Effective Air offers cost-effective and expert service throughout Glenview, Kenilworth, Wilmette, Winnetka, Evanston & Northbrook, IL.
You can usually slip the belt on the motor’s (smaller) pulley first and then start it on the blower pulley. Rotate the blower pulley by hand, holding the belt in place but keeping your fingers from getting caught between the belt and the pulley. The belt should slip right into place. If it seems to be too tight or difficult to set in place, it may be necessary to adjust the motor mount to provide more slack.
×